General Information

Manufacturer

Amplivox

Manufacturer Part Number

S355

Product Name

Elite Lectern

Features

• Exclusive, 50-watt, AmpliVox Multimedia Amplifier.
• Auxiliary input jack for a CD player, tape player or computer sound system. Capture your audience’s attention with a mixed media presentation by adding music and sound effects. Separate tone and volume controls.
• Line out jack for a tape recorder. You can record your performance as it is happening.
• Battery powered by 10 Alkaline D-cells or recharge-able NiCad Battery Pack. Sold separately
• Never run out of power! International AC Adapter/ Recharger (S1460) plugs into amplifier and converts to DC power or recharges NiCad Battery Pack. (S1465) Sold separately.
• All 3 mic inputs (dynamic, condenser, WIRELESS) can be used at the same time. Wireless mic kits sold separately.
• 2 speaker jacks for a total of 4 speakers possible (using Y-connectors). Great for true stereo sound and for amplifying over a wider area.

Lectern Features

• Solid wood veneer with scratch-resistant finish. Choose medium oak or mahogany.
• Moves effortlessly on glides. Weighs only 52 lbs.
• 24” X 14” work surface includes a book stop.
• One 6" x 8” oval full-range speaker built into slender center column.
• Extra speakers can be mounted on tripod. (See inset picture.) Extra speakers and tripods sold separately, below.
• Optional 25-watt, AC lamp allows speaker to read notes while room is dimmed for slides or overhead projector. (Bulb included.)
• International AC Adapter/Recharger - you'll never run out of power! (sold separately)

Specifications

• Amplifier Model S805A. 50 watts nominal output; 25 watts per channel. All integrated circuit design.
• Power Controls On-off switch with LED power indication light. Jack for optional, external AC adapter/recharger.
• Power Source 10 fresh D-cell Alkaline batteries (not included) provide up to 200 hrs. of talk time. 110/240V AC adapter available (S1460). (NiCad Battery Pack may be recharged using the optional, external AC adapter/recharger.)
• Hand Microphone Model S2030A. Professional, low-impedance, cardioid pattern, dynamic microphone, steel case, frequency response 50–15,000 Hz; with 15-ft. cable; adjustable, shock-mount, gooseneck microphone holder. On-off switch.
• Microphone Jacks 1 each dynamic, condenser with phantom power and wireless. Microphone volume control adjusts all mics together. All 3 mic inputs and auxiliary input can be used at the same
• Auxiliary Input 1 stereo jack with separate volume and tone controls. For tape, CD, computer projector.
• Line Out Stereo jack for tape recorder.
• Speaker One 6” x 8” oval full-range speaker.
• Speaker Jacks 2 jacks; 1 per line input channel. Each jack can drive 4- or 8-ohm speakers. Mic inputs are added equally to left and right channels. Output driver is placed into standby mode when its output jack is empty, reducing power drain and prolonging battery life.
• Lamp S1100 (optional). 25-watt clip-on AC lamp with 8-ft. cord. Bulb included.
• Accessory Jack for 12-volt DC accessory.
• Construction Solid wood veneer. 4 glides to move easily.
• Lectern Dimensions 45”H, 24”x14” work surface, 52 lbs. (without batteries).