|
Cam Spray 1000STLE Hot Water ST Series
Propane and Natural Gas Fired Pressure Washers 1000 PSI 69 Bar 3 GPM 11.4 Ipm 2
HP Burner Fuel: Liquid Propane; Trigger gun; Dual wand with side handle and
detergent tip; Quick change tips in 0, 15, 25, and 40 degree; Totally enclosed
motor; Powder coat frame; Schedule 80 coil with stainless cold wrap; Electronic
Ignition; Burners are designed to achieve a 140 degree fahrenheit rise in water
temperature; All hot water machines must be properly vented if operated indoors.
|
General Information |
|
Manufacturer |
Cam Spray |
|
Manufacturer Part Number |
1000STLE |
|
Product Line |
Pressure Washers
|
|
Product Name |
1000STLE Hot Water ST
Series Propane and Natural Gas Fired Pressure Washers |
|
Marketing Information
|
|
These hot water
pressure washers are designed for permanent installation in a wash area. LP
and natural gas fired machines are the best choice for indoor, permanent
installation applications because the clean burning fuel will eliminate
burner maintenance.These models feature state of the art design with triplex
ceramic plunger pumps with stainless steel valves, adjustable pressure,
downstream chemical injection, pressure gauge, thermal relief valve, 1/2
inch ID schedule 80 coil, 50 foot hose, variable temperature thermostat,
trigger gun with dual wand with 5 interchangeable nozzles including a 0, 15,
25, 40 degree pressure nozzle and a 40 degree soap nozzle. The 208 series is
equipped with accessories to allow for two guns to run at 4 gallons per
minute simultaneously. The 208 series is ideal for washing applications
where equipment room space is limited, and the 208 is economically priced
below the cost of two 4 GPM machines. All hot water models must be vented
for indoor applications. Three phase models are available.These models have
electronic ignition as standard equipment. |
|
Features |
- Triplex
plunger pump with ceramic plungers, thermal relief, and stainless steel
valves
- 35' Power cord
with ground fault interupter on models below 4 gpm
- Adjustable
pressure
- Adjustable
thermostat and pressure pop-off
- Chemical
injection
- 50' pressure
hose
- Trigger
gun
- Dual wand with
side handle and detergent tip
- Quick
change tips in 0, 15, 25, and 40 degree
- Totally
enclosed motor
- Powder
coat frame
- Schedule
80 coil with stainless cold wrap
- Electronic
Ignition
- Burners
are designed to achieve a 140 degree fahrenheit rise in water temperature
- All hot water
machines must be properly vented if operated indoors
|
|
Specifications |
- Hot
Water ST Series Model
- 1000 PSI
- 69 Bar
- 3 GPM
- 11.4 Ipm
- 2 HP
- Voltage:
120
- Amp:
20
- Single
Phase
- Burner
Fuel: Liquid Propane
- Dimensions:
47" L x 29" W x 46" H
|
A-20060629-1351-138-L *This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty. |
