|
Cam Spray 2000STLE Hot Water ST
Series Propane and Natural Gas Fired Pressure Washers 2000 PSI 138 Bar 4 GPM 1.5 Ipm
5 HP, Burner Fuel: Liquid Propane; Trigger gun; Dual wand with side handle and
detergent tip; Quick change tips in 0, 15, 25, and 40 degree; Totally enclosed
motor; Powder coat frame; Schedule 80 coil with stainless cold wrap; Electronic
Ignition; Burners are designed to achieve a 140 degree fahrenheit rise in water
temperature; All hot water machines must be properly vented if operated indoors.
|
General Information |
|
Manufacturer |
Cam Spray |
|
Manufacturer Part Number |
2000STLE |
|
Product Line |
Pressure Washers
|
|
Product Name |
2000STLE Hot Water ST Series Propane and Natural Gas Fired
Pressure Washers |
|
Marketing Information
|
|
These hot water pressure washers are designed for permanent
installation in a wash area. LP and natural gas fired machines are the best
choice for indoor, permanent installation applications because the clean
burning fuel will eliminate burner maintenance.These models feature state of
the art design with triplex ceramic plunger pumps with stainless steel
valves, adjustable pressure, downstream chemical injection, pressure gauge,
thermal relief valve, 1/2 inch ID schedule 80 coil, 50 foot hose, variable
temperature thermostat, trigger gun with dual wand with 5 interchangeable
nozzles including a 0, 15, 25, 40 degree pressure nozzle and a 40 degree
soap nozzle. The 208 series is equipped with accessories to allow for two
guns to run at 4 gallons per minute simultaneously. The 208 series is ideal
for washing applications where equipment room space is limited, and the 208
is economically priced below the cost of two 4 GPM machines. All hot water
models must be vented for indoor applications. Three phase models are
available.These models have electronic ignition as standard equipment. |
|
Features |
- Triplex plunger pump with ceramic plungers, thermal
relief, and stainless steel valves
- 35' Power cord with ground fault interupter on models
below 4 gpm
- Adjustable pressure
- Adjustable thermostat and pressure pop-off
- Chemical injection
- 50' pressure hose
- Trigger gun
- Dual wand with side handle and detergent tip
- Quick change tips in 0, 15, 25, and 40 degree
- Totally enclosed motor
- Powder coat frame
- Schedule 80 coil with stainless cold wrap
- Electronic Ignition
- Burners are designed to achieve a 140 degree fahrenheit
rise in water temperature
- All hot water machines must be properly vented if
operated indoors
|
|
Specifications |
- Hot Water ST
Series Model
- 2000 PSI
- 138 Bar
- 4 GPM
- 15.2 Ipm
- 5 HP
- Voltage: 230
- Amp: 25
- Single Phase
- Burner Fuel:
Liquid Propane
- Dimensions: 47"
L x 29" W x 46" H
|
A-20060629-1351-138-L *This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty. |
