|
Cam Spray 2555STATDE Hot Water STAT Series Diesel Fired
Pressure Washers 2500 PSI 172.5 Bar 5.5 GPM 20.9 Ipm 10 HP;
Dual wand with side handle and detergent tip; Quick change tips in 0, 15, 25,
and 40 degree; 8 gpm machines designed to operate two guns at 4 gpm each;
Totally enclosed motor; Powder coat frame; Schedule 80 coil with stainless cold
wrap; Electronic Ignition; Burners are designed to achieve a 140 degree
fahrenheit rise in water temperature.
|
General Information |
|
Manufacturer |
Cam Spray |
|
Manufacturer Part Number |
2555STATDE |
|
Product Line |
Pressure Washers
|
|
Product Name |
2555STATDE Hot Water
STAT Series Diesel Fired Pressure Washers |
|
Marketing Information
|
|
The TRDE and STATDE
Series hot water pressure washers are electric powered, diesel or kerosene
fired models designed for permanent installation in a washing area. Ideal
for applications where diesel fuel or kerosene is the fuel of choice. The
208 series is equipped with accessories to allow for two guns to run at 4
gallons per minute simultaneously. The 208 series is ideal for washing
applications where equipment room space is limited, and the 208 is
economically priced below the cost of two 4 GPM machines. These models
feature state of the art design with triplex ceramic plunger pumps with
stainless steel valves, adjustable pressure, downstream chemical injection,
pressure gauge, thermal relief valve, 1/2 inch ID schedule 80 coil, 5 gallon
fuel tank, 40 foot non-marking hose, variable temperature thermostat,
trigger gun with 36" insulated wand with 5 interchangeable nozzles including
a 0, 15, 25, 40 degree pressure nozzle and a 40 degree soap nozzle. |
|
Features |
-
Triplex plunger pump with ceramic plungers,
thermal relief, and stainless steel valves
-
Adjustable pressure
-
Adjustable thermostat and pressure pop-off
-
Chemical injection
-
50' pressure hose
-
Trigger gun
-
Dual wand with side handle and detergent tip
-
Quick change tips in 0, 15, 25, and 40 degree
-
8 gpm machines designed to operate two guns at 4
gpm each
-
Totally enclosed motor
-
Powder coat frame
-
Schedule 80 coil with stainless cold wrap
-
Electronic Ignition
-
Burners are designed to achieve a 140 degree
fahrenheit rise in water temperature
-
Look for optional accessories like the swivel hose
reel that mounts to the frame
-
All hot water machines must be properly vented if
operated indoors
|
|
Specifications |
- Hot Water STAT
Series Model
- 2500 PSI
- 172.5 Bar
- 5.5 GPM
- 20.9 Ipm
- 10 HP
- Voltage: 230
- Amp: 40
- Single Phase
- Burner Fuel
Capacity: 5 Gallon
- Dimensions: 60"
L x 29" W x 56" H
|
A-20060629-1351-138-L *This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty. |
