|
|
Crown CTs 1200 Two-Channel Power Amplifier, 250 watts per channel into 2 ohms
Dual, 600 watts per channel into 4 ohms Dual, 600 watts per
channel into 8 ohms Dual, 300 watts per channel into 16 ohms and
600 watts per channel (70V or 100V Dual), Frequency Response (at 1
watt, 20 Hz - 20 kHz) +/-0.25 dB, Maximum Input Level +20 dBu, UPC 871015000251,
Signal to Noise Ratio below rated power (20 Hz to 20 kHz) 105 dB unweighted,
High power density, 2RU chassis, Crown Switching Power Supply for lighter
weight, Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation
channel-pair
General Information |
Manufacturer |
Crown |
Manufacturer Part Number |
CTs 1200 |
Product Name |
Two-Channel Power Amplifier |
UPC Code |
871015000251 |
Overview |
Crown’s CTs Series amplifiers provide
exceptional performance, flexibility and value for installed sound
applications. CTs Series amplifiers feature independent selection of
high and low impedance operation for a specific channel, plus power
levels and features that were carefully chosen to match the requirements
of fixed install design. Easy integration with HiQnet™ and CobraNet™
allows CTs amplifiers to deliver a comprehensive lineup of monitoring
and control features along with digital audio transport for an
award-winning digital audio solution. |
Features |
- 250 watts per channel into 2 ohms
Dual, 600 watts per channel into 4 ohms Dual, 600 watts per
channel into 8 ohms Dual, 300 watts per channel into 16 ohms and
600 watts per channel (70V or 100V Dual)
- 500 watts into 4 ohms Bridge,
1200 watts into 8 ohms Bridge; 1200 watts into 16 ohms Bridge, 1200
watts (100V Bridge), 1200 watts (140V Bridge) and 1200 watts (200V
Bridge).
- High power density.
- 2RU chassis
- Crown Switching Power Supply for
lighter weight
- Selectable "Constant-Voltage" or
low-impedance (4/8 ohm) operation channel-pair
- Legendary Crown class-I (BCA) and
AB+B output topologies offer the best in amplifier reliability
- Comprehensive array of indicators
provide accurate diagnostics
- Fully PIP2-compatible.
|
Specifications |
Frequency Response (at 1 watt, 20 Hz - 20
kHz) |
±0.25 dB. |
Signal to Noise Ratio below rated power
(20 Hz to 20 kHz) |
105 dB unweighted |
Total Harmonic Distortion (THD) at 1 watt,
from 20 Hz to 20 kHz |
< 0.1%. |
Intermodulation Distortion (IMD) 60 Hz and
7 kHz at 4:1, from 163 milliwatts to full bandwidth power, typical |
< 0.1% |
Damping Factor: 10 Hz to 400 Hz |
> 3000 |
Crosstalk (below rated power, 20 Hz to 1
kHz) |
> 80 dB. |
Common Mode Rejection (CMR) (20 Hz to 1
kHz) |
> 50 dB |
DC Output Offset (shorted input) |
< 2 mV. |
Input Impedance nominally balanced,
nominally unbalanced |
10 kilohms, 5 kilohms |
Maximum Input Level |
+20 dBu |
Load Impedance (Note: Safe with all types
of loads) |
2-16Ohms, 70V, 100V
2-16Ohms, 70V, 100V
4-16 Ohms, 140V, 200V |
Input Sensitivity |
2/4/8 ohms 1.4V
100V 4 ohm: 2.46V
26 dB 8 ohm: 3.47V |
Required AC Mains |
120V, 60 Hz.
230V, 50 Hz |
Power Draw at Idle (120VAC mains) |
24W (Standby Mode) |
Cooling |
Continuously variable speed forced air,
front-to-back airflow |
Dimensions |
19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x
16.25 in. (41.3 cm) D |
Weight |
23.4 lb (10.6 kg) |
A-20130103-1250-130-L M-20161116-1250-191-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|