|
General Information |
|
Manufacturer |
Crown |
|
Manufacturer Part Number |
XTi 2002 |
|
Product Name |
XTi 2 Series Stereo Power Amplifier |
|
UPC Code |
871015005317 |
|
Overview |
|
There’s no debate — when you choose
Crown’s XTi 2 Series, you’re choosing one of the most powerful and
innovative amplifiers on the market today. That’s because the all-new
XTi 2 Series amps continue to set the standard for unmatched performance
and value, delivering the goods night after night without breaking a
sweat. With such innovations as a
universal tracking switch-mode power supply and a fully integrated suite
of speaker processing tools, these amps are at the top of their class
when it comes to thermal efficiency and system flexibility.
You also have greatly improved control
capabilities. The addition of Peakx Plus™ Limiters gives you full
command over threshold, attack and release, and we enhanced the
Subharmonic Synth so you can easily manage frequency, gain and filter
type, allowing for application-specific tuning.
Plus, you’ll now be able to tailor fan
speed for specific applications and have software visibility of the
Power Supply Temperature and AC Line Voltage. Combine all of that with
integrated cast-aluminum rack handles for maximum durability and
portability and you have the power to move you — and the world. |
|
Features |
- 2 ohm Stereo (per channel) 1,000W
- 4 ohm Stereo (per channel) 800W
- 8 ohm Stereo (per channel) 475W
- 4 ohm Bridge-Mono 2,000W
- 8 ohm Bridge-Mono 1,600W
- Peakx Plus™ Limiters provide the
ultimate in system performance and protection by allowing full
control over threshold, attack, and release
- Enhanced Subharmonic Synth section
provides user control over frequency, gain and filter type for
system-specific tuning
- 3 User-defined fan mode controls –
normal, early and fullspeed – for matching fan performance to a
specific application
- New system monitoring provides
software visibility of AC line voltage and power supply temperature
- Increased number of presets to a
total of 50 presets; 49 of which are user defineable
- Integrated cast-aluminum handles
for easy handling and enhanced durability
- Locking power cord clip provides a
secure connection between the amplifier and power cord
- Updated HiQnet System Architect™
control software
|
|
Specifications |
|
PERFORMANCE |
|
Sensitivity (volts RMS) for full rated
power at 4 ohms |
1.4V |
|
Frequency Response (at 1 watt into 4 ohms,
20Hz - 20 kHz) |
+0/–1 dB |
|
Signal to Noise Ratio (below rated 1 kHz
power at 8 ohms), A-weighted |
103 dB |
|
Total Harmonic Distortion (THD) |
< 0.5% |
|
Damping Factor (8 ohm): 20 Hz to 400 Hz
|
> 500 |
|
Crosstalk (below rated power) 20 Hz to 1
kHz |
> 70 dB |
|
Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced |
|
Maximum Input Signal |
+22 dBu typical |
|
AC Line Voltage and Frequency
Configurations Available (± 10%) |
100V, 120V, 220-240V 50/60 Hz |
AC Line Current
(120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)
|
8.3A; no more than 38W at idle |
|
Operating Temperature |
0° C to 40° C at 95% relative humidity
(non-condensing) |
|
INDICATORS |
|
Signal Indicator |
Green LED, one per channel, illuminates
when a very low-level signal is present at input (may be used for
troubleshooting cable runs). |
|
–10 Indicator |
Green LED flashes when output signal
exceeds –10 dB below clip. |
|
–20 Indicator |
Green LED flashes when output signal level
exceeds –20 dB below clip. |
|
Ready Indicator |
Green LED, one per channel, illuminates
when the amplifier is ready to produce audio. |
|
Clip Indicator |
Red LED, one per channel, turns on at the
threshold of audible distortion. |
|
Temp Indicator |
Red LED, one per channel, illuminates
under excessive temperature conditions. |
|
Power Indicator |
Blue LED illuminates when the amplifier
has been turned on and has power. |
|
CONTROLS |
|
Level |
Two front-panel rotary level controls, one
for each channel. |
|
Power Switch |
On/Off switch applies AC power to the
amplifier. |
|
Sel/Prev/Next Buttons |
Three buttons near the LCD screen that are
used to access menu items and front panel lockout. |
|
LCD Screen |
Backlit liquid crystal display that shows
preset and processing status. |
|
INTEGRATED PROCESSING |
|
Input EQ |
6 parametric filters per channel with
adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving
filters. This 8-filter EQ section can be bypassed. |
|
Crossover Filters |
Highpass and Lowpass per channel.
Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per
Octave. Also includes ±15 dB bandpass gain and polarity control. |
|
Output EQ |
8 parametric filters per channel with
adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be
bypassed. |
|
Delay |
For signal alignment of driver; 50 ms of
total delay. |
|
SubHarmonic Synth |
Takes the low-frequency content of the
input signal and “synthesizes” a new signal that is the same as the
input
signal but one octave lower. The new synthesized signal is then mixed
with the original signal to create the effect. New users now have
control over frequency, gain, and filter type. |
|
Peakx Plus™ Limiter |
User defeatable limiter that allows users
to control Threshold, Attack, and Release times. |
|
Presets |
30 total presets, 29 of which are
user-definable. |
|
INPUT/OUTPUT CONNECTORS |
|
Input Connectors |
XLR, one per channel |
|
Link/Out Connector |
Loop-thru signal from input connector for
linking another amplifier, one per channel. |
|
Output Connectors |
Two Neutrik® Speakon® NL4MP output
connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs
for use with optional single 4-conductor cable. Two binding post outputs
(in parallel with Speakon® connectors). |
|
HiQnet™ USB Connector |
Type B, connects to HiQnet™ network. |
|
CONSTRUCTION |
|
Chassis |
Steel |
|
Front Panel |
Cast aluminum |
|
Cooling |
Proportional speed fan with front-to-rear
airflow. |
|
Dimensions |
19” (W) x 3.5” (H) x 12.25” (D) |
|
Net Weight |
18.5 lbs (8.4kg) |
