|
DBX 220i Drive Rack System Processor with AFS
Advanced Feedback Suppression, Graphic and Parametric EQ; Analog Inputs Number
of Inputs (2) Switchable line or mic inputs Connectors Female XLR line inputs
and Euroblock Type Electronically balanced/RF filtered Impedance >50k Ă Max
input line level +20dBu CMRR > 40dB, typically >55db @ 1kHz Mic Pre gain 30 to
60dB Mic EIN < 110dB, 22Hz-22kHz, 150Ă Mic Phantom Power 15v Analog Outputs
Number of Outputs (2) Connectors Male XLR and Euroblock Type Electronically
balanced, RF filtered Impedance 120Ă™ balanced, 60Ă™ unbalanced Max Output Level
+20dBu A/D Performance Type dbx Type IV™ conversion system Dynamic Range line
>113 dB A-weighted, >110 dB unweighted Type IV dynamic range >119 dB, A-weighted,
22kHz BW >117 dB, unweighted, 22kHz BW Sample Rate 48kHz D/A Performance Dynamic
Range 112 dB A-weighted, 109dB unweighted System Performance Dynamic Range >110
dB A-weighted, >107dB unweighted THD+N 0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response 20Hz – 20kHz, +/- 0.5dB Interchannel Crosstalk >110dB, 120dB
typical Crosstalk input to output >780dB Operating Voltage 100 VAC, 50/60Hz, 120
VAC, 60Hz, 230VAC 50/60Hz Size 19” Wide, 1.75”High, 7.7” Deep Safety Agency
Approvals UL 6500, IEC 60065, EN 55013, E 60065
|
General Information |
|
Manufacturer |
DBX |
|
Manufacturer Part Number |
220i |
|
Product Line |
System Processor |
|
Product Name |
220i Drive Rack
System Processor with AFS Advanced Feedback Suppression |
|
Marketing Information |
Designed from the ground up to provide state-of-the-art signal
processing, the DriveRack 220i is the perfect tool for any fixed-install
application. With a full complement of processing features and Mic/Line
inputs the DriveRack 220i can provide both system and microphone
processing. Featuring the new, patent-pending Advanced Feedback
Suppression (AFS) algorithm, equalization, dynamics processing, delay,
matrix mixing, and bandpass filters, the DriveRack 220i will exceed your
expectations.
The DriveRack 220i is piloted from the intuitive DriveWare GUI that
offers both Configuration and Control of the processing modules. Modules
can be accessed, edited and saved as part of programs. Processing
modules can be linked between the channels for true stereo processing.
If independent processing is desired, parameters can be copied from one
channel to the next to ensure that setup is quick and easy. Stored
programs can be loaded from either the front panel or from wall mounted
Zone Controllers. Zone Controllers can also be used for output muting or
adjusting output volumes. |
|
Features & Benefits
|
- Advanced Feedback Suppression
(AFS)
- Graphic and Parametric EQ
- Compressor
- Limiter
- Auto Gain Control
- Noise Gating
- De-Esser
- Ducker
- Bandpass Filters
- 2x2 Matrix Mixer
- 1.3 Seconds of Delay
- RS-232 PC GUI control
- Mic/Line Inputs
- Wall Panel Control
- Security Lockout
|
|
Specifications
|
|
Analog Inputs |
Number of Inputs (2) Switchable line or
mic inputs
Connectors Female XLR line inputs and
Euroblock
Type Electronically balanced/RF
filtered
Impedance >50k Ă™
Max input line level +20dBu
CMRR > 40dB, typically >55db @ 1kHz
Mic Pre gain 30 to 60dB
Mic EIN < 110dB, 22Hz-22kHz, 150Ă™
Mic Phantom Power 15v |
|
Analog Outputs |
Number of Outputs (2)
Connectors Male XLR and Euroblock
Type Electronically balanced, RF
filtered
Impedance 120Ă™ balanced, 60Ă™
unbalanced
Max Output Level +20dBu |
|
A/D Performance
Type dbx Type IV™ conversion system
|
Dynamic Range line >113 dB A-weighted,
>110 dB unweighted
Type IV dynamic range >119 dB, A-weighted,
22kHz BW >117 dB, unweighted, 22kHz BW
Sample Rate 48kHz |
|
D/A Performance |
Dynamic Range 112 dB A-weighted, 109dB
unweighted |
|
System Performance |
Dynamic Range >110 dB A-weighted, >107dB
unweighted
THD+N 0.003% typical at +4dBu, 1kHz,
0dB gain
Frequency Response 20Hz – 20kHz, +/-
0.5dB
Interchannel Crosstalk >110dB, 120dB
typical
Crosstalk input to output >780dB
Operating Voltage 100 VAC, 50/60Hz, 120
VAC, 60Hz, 230VAC 50/60Hz
Size 19” Wide, 1.75”High, 7.7” Deep
|
A-20050504-1250-117-L
*This item is BRAND NEW - not refurbished.
It comes with all manufacturer supplied accessories, and full manufacturer's USA
warranty.
|
