Optoma HD7100 DLP 16:9 Home Theater Projector, 1000 ANSI Lumens, 720p native (1280 x 720) Resolution, DarkChip3 (HD-7100 HD 7100)
What is DLP technology (Flash Demo 1.6MB)
Optoma HD7100 DLP 16:9 Home Theater Projector, 1000 ANSI Lumens, 720p native (1280 x 720) Resolution, DarkChip3; Single 0.80-inch DarkChip3 DLP from Texas Instruments Display Technology, 1000 lumens (typical) Brightness, 14 pound (6.2kg) Weight, Video: 1080p (1920 x 1080), PC: UXGA (1600 x 1200) Maximum Resolution, 4-Way Optical, Up/Down & Right/Left, Lens Shift , 13.5 x 5.6 x 12.5 inches, 342mm x 144mm x 320mm Dimensions (WxHxD) , 5000:1 (Full On/Full Off) Contrast Ratio , 32dB Noise Level, 250W UHP, 3000 hours STD Lamp Type and Life.
General Information |
Manufacturer |
Optoma |
Manufacturer Part Number |
HD7100 |
Product Line |
Projectors |
Product Name |
DLP 16:9 Home Theater Projector, 1000 ANSI Lumens (HD7100) |
Marketing Information |
Optoma’s HD7100 home theater projector delivers the ultimate in 720p high-definition imaging demanded by the most discerning home theater aficionados. Featuring Texas Instruments’ DarkChip DLP technology, the HD7100 creates vibrant, vivid images, rich in color and contrast. |
Features & Benefits |
contrast ratio.
Newly developed LVDS (Low voltage differential signal) chip eliminates color breaking phenomena common with previous generation DLP™ projectors.
The 250W high-output lamp gives high color purity and brightness. Natural images are possible with excellent color reproduction and powerful expression capabilities.
Latest image quality circuitry gives you vivid images.
New I/P conversion algorithm enhances motion.
Extensive improvements in jagged edges and slanted lines in moving images.
New Edge Up-Scaling.
As a result of reducing jagged edges and flickering when up-scaling edges of slanted lines, even signals not reaching a panel resolution of 480I/P can be projected by converting them to 1280 × 720 resolution images.
New Film mode.
3:2 pull-down enhancement for 480I, 576I and HDTV 1080I signals.
Use of a DVI/HDCP terminal enables all processes from input to signal processing and projecting to be performed digitally. All-digital projection does not suffer the data loss of analog conversion. Home theaters using HTPC are supported.
|
Images |
|
Specifications |
Display Technology |
Single 0.80-inch DarkChip3 DLP from Texas Instruments |
Brightness |
1000 lumens (typical) |
Weight |
14 pound (6.2kg) |
Resolution |
720p native (1280 x 720) |
Maximum Resolution |
Video: 1080p (1920 x 1080)
PC: UXGA (1600 x 1200) |
Lens Shift |
4-Way Optical, Up/Down & Right/Left |
Dimensions (WxHxD) |
13.5 x 5.6 x 12.5 inches
342mm x 144mm x 320mm |
Contrast Ratio |
5000:1 (Full On/Full Off) |
Noise Level |
32dB |
Lamp Type and Life |
250W UHP, 3000 hours STD |
Image Size |
30 to 300 inch
(1.5 to 11.4 meters) |
Computer Compatibility |
WXGA, UXGA Compression, XGA, SXGA, SVGA, VGA Compression, VESA standard, PC & Macintosh Compatible |
Video Compatibility |
NTSC: M (3.5MHz), B/G, D/K (4.43MHz)
PAL: B, D, G, K, I, M, N
SECAM: B, D, G, K, L
HDTV: 480i, 480p, 576i, 576p, 720p, 1080i |
Aspect Ratio |
16:9 widescreen, with support for 4:3 |
Projection Lens |
f=24.0 – 30.1 mm, F/2.36-2.50 |
Keystone Correction |
Horizontal and Vertical |
Throw Ratio |
1.30:1 to 1.62:1 |
HSync |
15 to 75kHz |
VSync |
48 to 85Hz |
Power Supply |
100-240 volts, 50-60 Hz |
Power Consumption |
370 watts,
<5 watts in standby mode |
Operating Temperature |
23 to 95 F (-5 to 35C)
80% Maximum humidity |
Displayable Colors |
10-bit per channel color processing |
Projection Method |
Front/rear/ceiling mount/table top |
Uniformity |
90% |
I/O Connectors |
DVI w/HDCP, component video, composite video (RCA), S-Video, RGB, RS-232, dual IR receivers |
Standard Accessories |
AC Power cord, S-Video cable, composite video cable, remote control, lens cap, batteries, User Manual |
A-20060510-1043-110-E
M-20060731-1043-117-E
M-20060817-1043-110-E
|