Pioneer TSW307D2 Car 12-Inch
Subwoofer with 1200 Watts maximum Power (400 Watts Nominal), Composite IMPP Cone
using Interlaced Aramid Fiber Woofer Cone Material, Cone Reinforcement
Arcs Woofer Cone Design,Wide Roll, Three-Layer Fiber Woven Radial Surround,
4-Layer, Long Voice Coil Voice Coil, Copper Voice Coil Wire, Phenol Resin
Coated Glass Cloth Voice Coil Bobbin, Conex Damper (Spider), Damper Ring,
Standard Top Plate, Projected Pole Yoke with Vented Pole, Handling 400 Watts
Nominal Power, 18 ~ 500Hz Frequency Response, 89dB Sensitivity, 1 or 4 ohm
Rating
General Information |
Manufacturer |
Pioneer
|
Manufacturer Part Number |
TSW307D2
|
Product Line |
Subwoofer
|
Product Name |
TSW307D2 Car
12-Inch Subwoofer with 1200 Watts maximum Power, 400 Watts Nominal,
Composite IMPP Cone using Interlaced Aramid Fiber Woofer Cone Material,
Cone Reinforcement Arcs Woofer Cone Design,Wide Roll, Three-Layer Fiber Woven
Radial Surround, 4-Layer, Long Voice Coil Voice Coil |
Marketing Information |
For
extraordinary performance, the cones are made of Pioneer's IMPP with
Aramid Fiber, and we've used a dual mass magnet assembly for higher
magnetic force — and more power. The wire terminals are spring-loaded
and can take up to 8-gauge wire.
IMPP with Aramid Fiber Cone
Pioneer is the world's largest car speaker manufacturer, and our work in
advanced materials and manufacturing processes has led to major
breakthroughs in mobile audio. One of these was IMPP (Injection-Molded
Polypropylene), which allowed cones to be lighter AND more rigid. Now
we've combined this with Aramid fiber, a material used in the
manufacture of bulletproof products. This combination produces a cone
that's incredibly strong, very light, and very rigid. In other words,
it's perfect for a high-performance subwoofer.
3-Layer Radial Surround
A sub's surround plays a key role in its overall performance. In order
for bass response to be clear and tight, the surround has to respond
evenly around its entire circumference without flexing or puckering,
even at high volume levels. That's why Pioneer created a surround
consisting of two layers of urethane, with a layer of interwoven fiber
between them. It's strong, stable, and it reduces distortion.
Dual Mass Magnet with Magnet Cover
It's simple, really. Follow us here: to accurately drive and control its
voice coil, a speaker needs a magnet and a pole yoke, to create magnetic
force. The bigger or denser the magnet, the greater the magnetic force.
The greater the magnetic force, the greater the power and control that's
exerted over the voice coil. To make this happen in a big way, we use a
Dual Mass Magnet assembly (weighing in at 83oz.) to significantly
increase the magnetic force. SO, you get bigger and more accurate music.
And yes, we even included a magnet cover.
Spring-Compression Binding Posts
Why do we use Spring-Compression Binding Posts, instead of standard
speaker wire terminals? So your speaker wire NEVER shakes loose due to
vibration (either from the road or from your music). When you insert the
wire, the connector keeps a constant pressure on it. And it won't let go.
These binding posts will accept wire as large as 8-gauge.
Dual Voice Coil
TS-W307D2/4 provides two voice coils, each either at dual 2 or dual 4
ohms. So you can use a low-impedance amp to produce much bigger, much
more powerful bass. More options, more power: that's what DVC is all
about. |
Features |
- Size:12"
- Woofer Cone Material: Composite IMPP Cone using
Interlaced Aramid Fiber
- Woofer Cone Design: Cone Reinforcement Arcs
- Surround: Wide Roll, Three-Layer Fiber Woven Radial
- Voice Coil: 4-Layer, Long Voice Coil
- Voice Coil Wire: Copper
- Voice Coil Bobbin: Phenol Resin Coated Glass Cloth
- Damper (Spider): Conex
- Damper Ring: Yes
- Top Plate: Standard
- Projected Pole Yoke with Vented Pole
- Magnet Construction: Double Mass High-Power (83oz)
- Basket Design: Stamped Basket with Magnet Cover
- Gasket: Molded
- Wire Terminals: Integrated Single-Sided Silver
Compression Terminals
|
Images |
|
Specfications |
- Watts
MAX. Music Power: 1200 Watts
- Watts Nominal Power: Handling 400 Watts
- Frequency Response: 18 ~ 500Hz
- Sensitivity: 89dB
- Ohm Rating: 1 or 4 ohm
- Recommended Enclosure: 0.85 ~ 1.75 Cubic Feet
- Dimensions: 327 mm x 172 mm
- Mounting Depth: 153 mm
- Accessory Grill: UD-G307
|
A-20070516-1029-117-E
*This item is BRAND NEW - not refurbished. It comes
with all manufacturer supplied accessories, and full manufacturer's USA warranty.
|