|
|
Protek B8400 Sweep Function Generator
4 MHz, Wide 0.004Hz to 4MHz Frequency
range, CW/Triggered and Gated mode, Sweep output and VCG input, 1000:1 linear
sweep and 10,000:1 frequency log sweep widths, Settable Sweep Start and Stop
Frequencies, Low Distortion sinewave;
Harmonic Distortion < 0.5 % on the
1K and 10K range / 1% on the x1, x10, x 100 and x100K ranges / 25dBc on the x1M
range; Symmetry ±1% to 100KHz
/ ±5% to 4MHz.
General Information |
Manufacturer |
Protek |
Manufacturer Part Number |
B8400 |
Product Line |
Test Equipment |
Product Name |
B8400 Sweep Function Generator |
Features |
- Wide 0.004Hz to 4MHz Frequency
range
- CW/Triggered and Gated modes
- Sweep output and VCG input
- 1000:1 linear sweep and 10,000:1
frequency log sweep widths
- Settable Sweep Start and Stop
Frequencies
- Low Distortion sinewave
|
Specifications |
Frequency Characteristics |
- Frequency Range 0.004Hz to
4MHz in 7 ranges
- Ranges x1, x10x, x100, x1K,
x10k, x100k, x1M
- Dial Accuracy 5% of full
scale
|
Output Characteristics |
- Waveforms Sine, Square, Triangle, TTL
Pulse
- High Output Amplitude: 15mV to 10V (into
50W) / DC Offset: 0 to ±5 into 50W / Impedance: 50W / Attenuator: 30dB
variable
- Low Output Amplitude: 0 to 1V (into 50W)
- DC Offset: 0 to ±0.5 (into 50W) /
Impedance: 50W / Attenuator: 30dB variable
|
Sine Wave |
- Frequency Range 0.004Hz to
4MHz
- Flatness ±2.0 % (0.004Hz to
400KHz) / ±10% (400KHz to 4MHz)
- Harmonic Distortion < 0.5 %
on the 1K and 10K range / 1% on the x1, x10, x 100 and x100K ranges / 25dBc
on the x1M range
|
Square Wave |
- Frequency Range 0.004Hz to 4MHz
- Rise/Fall Time < 50ns into 50W (High
output terminals)
- Symmetry ±1% to 100KHz / ±5% to 4MHz
|
Triangle |
Linearity > 99% to 200KHz |
Opearting Modes |
- Modes Operating modes (CW, Triggered,
Gated, Sweep, Manually Triggered)
- Trigger/Gate Input Level TTL
- Trigger/Gate Frequency Range To 4MHz Max.
- Trigger/Gate Minimum Pulse Width < 50ns
|
Sweep |
- Type Linear and Log
- Sweep Time 30ms to 60
seconds continuously variable
- Sweep Width 1:1,000 linear /
1:10,000 log continuously variable / Sweep start and stop frequencies may be
set with the Freq dial and the Freq. Stop control.
|
Outputs |
- Sync TTL level
- GCV Output proportional to the selected
frequency, 0 to -5V
- Sweep 4V P-P
- Impedance 600W
|
VCG Input |
- Input Voltage 0 to ±4V P-P will cause a
1:1,000 frequency change (linear) and 1:10,000 (Log)
- Input Impedance 2KW
|
General Specifications |
- Operating Temperature 0 to 50°C (32 to
120°F)
- Size 3.5" (H) x 11.4" (W) x 10.6" (D)
- Weight 5 lbs
- AC Line Voltage 120/220V, 50/60Hz
- Accessories Manual, Line cord, BNC cable
|
A-20060805-1261-109-E
M-20070220-1261-138-E
*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.
|