Saniflow M88 Junior Push Button Hand Dryer, ABS cover, 1/8" thick, White finish;
Voltage: 110 - 120 V; Power
consumption: 11 A; Motor: 1/7 HP; Nominal power: 1.300 W; R.P.M.: 3.300; Heating
element: 1.200 W; Effective airflow: 111 CFM; Free airflow: 139 CFM; Noise level
at 79'': 60 dB; Air speed: 3.872 LFM; Temperature (at 4'' distance / 70ºF):
123.8 ºF; Insulation: Grounding required; Frequency: 50/60 Hz; Drying time: 45";
Mounting: Surface.
Watch Saniflow
Video
General
Information |
Manufacturer |
Saniflow |
Manufacturer
Part Number |
M88 |
Product
Line |
Hand Dryer |
Product
Name |
M88 |
Marketing Information |
Surface mounted hand dryer shall be
fabricated with one-piece 1/8” thick thermoplastic ABS UL94-5V cover.
The back base shall be thermoplastic ABS UL94-5V and with 4 holes for
wall mounting. The dryer shall be activated using the push button that
activates an electromechanical timer with a 45 seconds cycle before
switching dryer off automatically. The induction motor shall be 1/7 hp,
3,300 r.p.m.(at 60 Hz) and incorporate a temperature limiter which
switch off at 266 ºF (130ºC). The waved wire NiCr heating element should
incorporate a thermal limiter, which will switch off by a temperature of
176 ºF (80ºC.). The PP UL94-V0 fan should have a single inlet and the
fan scroll shall be made of thermoplastic ABS UL94-5V. Dryer shall
deliver 139 CFM of air at 123.8 ºF (51 ºC) and 3,872 LFM velocity during
user controlled drying cycle. The dryer shall have a total power of
1,300 Watts with a consumption of 11A. Noise level should be 60 dB.
Overall dimensions shall be 9-7/8”W x 11-3/4”H x 5-1/4”D. |
Features |
General Description |
Warm air hand dryer.
Button operated.
Suitable for medium traffic facilities.
Compact, maintenance-free.
Highest durability in its class.
It normally goes along with a soap dispenser. |
Components & Materials |
White ABS thermoplastic one-piece cover,
1/8” (3 mm) thick. Cover fixed to the base by means of 4 Phillips head
screws.
Engineering thermoplastic PP base, with 4 Ø 5/64” (8 mm) holes for wall
mounting.
Motor, induction, 3,300 rpm (at 60 Hz), maintenance-free and high
durability, incorporates a safety thermostat.
PP UL94-VO single inlet fan wheel.
Waved wire NiCr resistor that incorporates a safety thermostat.
Push-button activates an electronic timer, with a 45 seconds cycle.
Stainless steel air outlet grill. |
Operation |
Press the Push-button to initiate the drying
process. The dryer will go on with no interruption for 45 seconds. |
Certificates |
UL comply with UL 499 norm. |
Specifications |
- Voltage: 110 - 120 V
- Power consumption: 11 A
- Motor: 1/7 HP
- Nominal power: 1.300 W
- R.P.M.: 3.300
- Heating element: 1.200 W
- Effective airflow: 111 CFM
- Free airflow: 139 CFM
- Noise level at 79'': 60 dB
- Air speed: 3.872 LFM
- Temperature (at 4'' distance / 70ºF):
123.8 ºF
- Insulation: Grounding required
- Frequency: 50/60 Hz
- Drying time: 45"
- Mounting: Surface
- Size: 9-7/8"W x 11-3/4"H x 5-1/4"D
- Weight: 6.6 Lbs
|
A-20060629-1405-116-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|