|
|
|
Saniflow M88A Junior Automatic Hand Dryer, ABS cover, Warm air hand dryer,
Sensor operated, 1/8"
(3 mm)
thick, White finish;
Voltage: 110 - 120 V; Power
consumption: 11 A; Motor: 1/7 HP; Nominal power: 1.300 W; R.P.M.: 3.300; Heating
element: 1.200 W; Effective airflow: 111 CFM; Free airflow: 139 CFM; Noise level
at 79'': 60 dB; Air speed: 3.872 LFM; Temperature (at 4'' distance / 70ºF):
123.8 ºF; Insulation: Grounding required; Frequency: 50/60 Hz; Drying time: 45";
Mounting: Surface.
Watch Saniflow Video
|
General
Information |
|
Manufacturer |
Saniflow |
|
Manufacturer
Part Number |
M88A |
|
Product
Line |
Hand Dryer |
|
Product
Name |
Junior Automatic Hand Dryer |
|
Marketing Information |
|
Surface mounted hand dryer shall be
fabricated with one-piece 1/8” thick thermoplastic ABS UL94-5V cover.
The back base shall be thermoplastic ABS UL94-5V and with 4 holes for
wall mounting. The dryer shall be activated through an infrared
electronic sensor and shall automatically turn off when hands are
removed. The induction motor shall be 1/7 hp, 3,300 r.p.m.(at 60 Hz) and
incorporate a temperature limiter which switch off at 266 ºF (130ºC).
The waved wire NiCr heating element should incorporate a thermal limiter,
which will switch off by a temperature of 176 ºF (80ºC.). The PP UL94-V0
fan should have a single inlet and the fan scroll shall be made of
thermoplastic ABS UL94-5V. Dryer shall deliver 139 CFM of air at 123.8
ºF (51 ºC) and 3,872 LFM velocity during user controlled drying cycle.
The dryer shall have a total power of 1,300 Watts with a consumption of
11A. Noise level should be 60 dB. Overall dimensions shall be 9-7/8”W x
11-3/4”H x 5-1/4”D. |
|
Features |
|
General Description |
Warm air hand dryer.
Sensor operated.
Suitable for medium traffic facilities.
Compact, maintenance-free.
Highest durability in its class.
It normally goes along with a soap dispenser. |
|
Components & Materials |
White ABS thermoplastic one-piece cover,
1/8” (3 mm) thick. Cover fixed to the base by means of 4 Phillips head
screws.
Engineering thermoplastic PP base, with 4 Ø 5/64” (8 mm) holes for wall
mounting.
Motor, induction, 3,300 rpm (at 60 Hz), maintenance-free and high
durability, incorporates a safety thermostat.
PP UL94-VO single inlet fan wheel.
Waved wire NiCr resistor that incorporates a safety thermostat.
Adjustable (2”-8”) IR electronic detection sensor.
Stainless steel air outlet grill. |
|
Operation |
Place the hands under the air outlet grill.
The dryer will start automatically, and go on with no interruption as
long as the hands are kept in the detection range of the sensor. The
appliance will stop 2 seconds after the hands are removed from the
airflow. |
|
Certificates |
UL comply with UL 499 norm. |
|
Specifications |
- Voltage: 110 - 120 V
- Power consumption: 11 A
- Motor: 1/7 HP
- Nominal power: 1.300 W
- R.P.M.: 3.300
- Heating element: 1.200 W
- Effective airflow: 111 CFM
- Free airflow: 139 CFM
- Noise level at 79'': 60 dB
- Air speed: 3.872 LFM
- Temperature (at 4'' distance / 70ºF):
123.8 ºF
- Insulation: Grounding required
- Frequency: 50/60 Hz
- Drying time: 45"
- Mounting: Surface
- Size: 9-7/8"W x 11-3/4"H x 5-1/4"D
- Weight: 6.6 Lbs
|
A-20060629-1405-116-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
