|
Sony UWPX1/6264 UWP
Series UHF Synthesized wireless microphone system,
Suitable for use in PA systems;
Supplied with a microphone windscreen and holder-clip as well as a
belt clip;
PLL Synthesized System to achieve stable transmission and
reception;
Space Diversity Reception System;
Tone Squelch Circuitry; Simultaneous Multi-Channel Operation.
|
General
Information |
|
Manufacturer |
Sony |
|
Manufacturer
Part Number |
UWPX1/6264
|
|
Product
Line |
Wireless Microphone System |
|
Product
Name |
UWPX1/6264 |
|
Marketing Information |
|
UWP Series UHF Synthesized
wireless microphone system. Package includes a lavalier microphone,
bodypack transmitter and tuner module. Channels 62 to 65. |
|
Features |
- Consists of a lavalier microphone, bodypack transmitter and tuner
module
- Suitable for use in PA systems
- Supplied with a microphone windscreen and holder-clip as well as a
belt clip
- PLL Synthesized System To achieve stable transmission and reception.
Avoid interference with other frequency channels and to allow the
selection of a preferred channel from multiple frequencies.
- Space Diversity Reception System Reduces the occurrence of reception
interruptions (signal dropout).
- Tone Squelch Circuitry Prevents the output of unwanted signals or
noise from other signal transmissions in the air, as well as the RF
noise and popping noise that occur when the transmitter is powered on
or off.
- Simultaneous Multi-Channel Operation Users can easily choose
intermodulation-free frequencies for the transmitters and tuners,
simplifying the task of system set-up.
|
|
Specifications |
BODYPACK TRANSMITTER
Oscillator |
Crystal-controlled PLL synthesizer |
|
Type of emission |
F3E |
|
Carrier frequencies |
758 MH to 782 MHz (TV channels 62 to 65)
Users may choose from 188 frequencies on each model |
|
RF power output |
30mW or 5 mW (selectable) |
|
Antenna |
1/4 wave length wire |
|
Pilot tone signal |
32 kHz |
|
Frequency response |
40 Hz to 18kHz (typical) |
|
Reference deviation |
±5 kHz (-60 dBV, 1kHz input) |
|
Signal-to-noise ratio |
60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted) |
|
Audio attenuator adjustment range |
0 to 21 dB (in 3 dB steps) |
|
Audio input level |
-60 dBV (at 0 dB attenuator level) |
|
Audio input connector |
3.5 mm (5/32 inch) dia., 3-pole mini jack |
Indicators
LCD
LED |
Operating channel number/frequency, atttenuator level, RF-output level
(high/low), audio-input status, RF-output status, transmitter battery
status, and accumulated operating time
Power status |
|
Power requirements |
DC 3.0 V (with two AA-size alkaline (LR6) batteries) |
|
Battery life: |
Approx. 6 hours with Sony AA-size alkaline (LR6) batteries at 25° C (77°
F) at 30 mW output |
|
Dimensions (w x h x d) |
63 x 100 x 27 mm (2-1/2 x 4 x 1-1/8 inches) |
|
Weight |
Approx. 140 g (4.9 oz) including batteries |
TUNER MODULE
Oscillator |
Crystal-controlled PLL synthesizer |
|
Type of reception |
Space diversity |
|
Receiving frequencies |
758 MH to 782 Mhz (TV channels 62 to 65)
Users may choose from 188 frequencies on each model |
|
Antenna |
1/4 wave length wire |
|
Pilot-tone signal |
32 kHz |
|
RF squelch level |
25 dBµ |
|
De-emphasis |
50µs |
|
Frequency response |
50 Hz to 18 kHz (typical) |
|
Reference deviation |
±5 kHz (at 1kHz modulation) |
|
Signal-to-noise ratio |
60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted) |
Indicators
LCD
LED |
Operating channel number/frequency, audio-output status, RF-input level
RF-input status |
|
Power requirements |
DC 9.0 V |
|
Dimensions (w x h x d) |
56.6 x 25.5 x 121.0 mm (2-1/2 x 1-1/16 x 4-7/8 inches) |
|
Weight |
Approx. 150 g (5.3 oz) |
A-20060814-1250-116-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty. |
