Where everything is always ON SALE!

 Serving our customers since 1990
Store Ratings & Reliability: Report 1, OBB, Amazon
Over 100,000 products
Home - About  Us - Contact Us - FAQs - Financing - Policies		 RatePoint Site Seal   305-652-0442
(Mon-Fri 10am-6pm EST)
Minimum Order $100 
Resellers: Call for Volume Pricing


View Cart
NAVIGATION
Home PageSearchView Shopping CartCheckoutHelp
DEPARTMENTS
AppliancesClothing, Shoes & AccesoriesComputer ProductsEducational ProductsElectronicsExtended Service PlansExtended WarrantiesFurnitureHealth ProductsHome & GardenJanitorialMachines & ToolsOffice OutdoorsProjectorsSecurity SystemsShop By BrandTime and WeatherToys & GamesUncategorizedUseful Information
Machines & Tools > Welders
Welder Accessories
Welder Accessories
Welder Accessories
Welding Helmets
Welding Helmets
Sort by:   Lowest Price   Alphabetical   Newest
Hobart 500 433 Champion 10000 Welder/Generator, 230 Amp, 10000 Watt; DC weld output for smooth arc performance and easy starts; Four 120 volt (20 amp) and one 120/240 volt (50 amp) receptacles with push-button reset circuit breakers; Single knob current control for easy set up (500433 500-433)
Hobart 500 433 Champion 10000 Welder/Generator, 230 Amp, 10000 Watt; DC weld output for smooth arc performance and easy starts; Four 120 volt (20 amp) and one 120/240 volt (50 amp) receptacles with push-button reset circuit breakers; Single knob current control for easy set up (500433 500-433)
Sku: 500433
Brand:Hobart
 $2,609.44
Qty:  
Hobart 500434 Welder with Kohler 20 hp OHV Engine, 10,000-watt generator or a 230 constant-current DC welder, 20 HP Kohler gasoline engine, automatic idle, 10 gallon fuel tank, 1-240 at 50 amp receptacle, 4-120V receptacles, 10 gal Fuel-tank capacity, Splash Lubrication system (500434 500-434 500 434)
Hobart 500434 Welder with Kohler 20 hp OHV Engine, 10,000-watt generator or a 230 constant-current DC welder, 20 HP Kohler gasoline engine, automatic idle, 10 gallon fuel tank, 1-240 at 50 amp receptacle, 4-120V receptacles, 10 gal Fuel-tank capacity, Splash Lubrication system (500434 500-434 500 434)
Sku: 500434
Brand:Hobart
 $2,609.44
Qty:  
Hobart 500493 Airforce 625 Portable Air Plasma Cutter, 208/230 V, 50/60 Hz, w/ 25 ft ICE-40 C torch, Wind Tunnel Technology, Fan-On-Demand, Power Factor Correction (PFC) circuitry, Enclosed gas/air filter/regulator (500 493 500-493 50049 HOB-500493)
Hobart 500493 Airforce 625 Portable Air Plasma Cutter, 208/230 V, 50/60 Hz, w/ 25 ft ICE-40 C torch, Wind Tunnel Technology, Fan-On-Demand, Power Factor Correction (PFC) circuitry, Enclosed gas/air filter/regulator (500 493 500-493 50049 HOB-500493)
Sku: 500493
Brand:Hobart
 $1,719.40
Qty:  
Hobart 500408 Ironman 250 200 Amp Beta-Mig Mig and Flux Cored Welder, 90 - 750 IPM Wire Feed Speed, 30 - 250 A Current Range, MIG and Flux Cored Processes, Welds 22 gauge up to 1/2 inch material in a single pass, Handles wire spools up to 12 in - 33 lb - wire feed speed adjusts from 90 to 750 IPM, Built-in thermal overload protects the unit (500 408 500-408 500408)
Hobart 500408 Ironman 250 200 Amp Beta-Mig Mig and Flux Cored Welder, 90 - 750 IPM Wire Feed Speed, 30 - 250 A Current Range, MIG and Flux Cored Processes, Welds 22 gauge up to 1/2 inch material in a single pass, Handles wire spools up to 12 in - 33 lb - wire feed speed adjusts from 90 to 750 IPM, Built-in thermal overload protects the unit (500 408 500-408 500408)
Sku: 500408
Brand:Hobart
Select Extended Service Plan

 $1,710.53
Qty:  
Hobart 500424 Tigmate 230-Volt AC/DC, Tig and Stick Welding Package with Fingertip Control, 150 amp TIG torch with 12-1/2ft. cord and flow-through quick-connect, 25ft.TIG torch supplied with finger tip control models, Fingertip amperage control, 12ft. work cable with clamp, Electrode holder and 15ft. cable with quick-connect, AC output for superior aluminum welding, DC output for mild and stainless steel (500-424 50042 5004 HOB-500424)
Hobart 500424 Tigmate 230-Volt AC/DC, Tig and Stick Welding Package with Fingertip Control, 150 amp TIG torch with 12-1/2ft. cord and flow-through quick-connect, 25ft.TIG torch supplied with finger tip control models, Fingertip amperage control, 12ft. work cable with clamp, Electrode holder and 15ft. cable with quick-connect, AC output for superior aluminum welding, DC output for mild and stainless steel (500-424 50042 5004 HOB-500424)
Sku: 500424
Brand:Hobart
 Select Extended Service Plan

 $1,673.72
Qty:  
Hobart 500425 Tigmate 230-Volt AC/DC, Tig and Stick Welding Package with Foot Control, AC output for superior aluminum welding, DC output for mild and stainless steel (500-425, 50042, 5004, HOB-500425)
Hobart 500425 Tigmate 230-Volt AC/DC, Tig and Stick Welding Package with Foot Control, AC output for superior aluminum welding, DC output for mild and stainless steel (500-425, 50042, 5004, HOB-500425)
Sku: 500425
Brand:Hobart
 Select Extended Service Plan

 $1,633.31
Qty:  
Hobart 500474 Airforce 400 Plasma Cutter, 27 A at 90 VDC Rated Output at 35% Duty Cycle, 288 VDC Max. Open Circuit Voltage, 4.5 CFM (129 L/min) at 60 PSI (414 kPA) Plasma Gas Flow/Pressure, H: 12 in (305 mm) (500474 AIRFORCE 400 AIRFORCE-400)
Hobart 500474 Airforce 400 Plasma Cutter, 27 A at 90 VDC Rated Output at 35% Duty Cycle, 288 VDC Max. Open Circuit Voltage, 4.5 CFM (129 L/min) at 60 PSI (414 kPA) Plasma Gas Flow/Pressure, H: 12 in (305 mm) (500474 AIRFORCE 400 AIRFORCE-400)
Sku: 500474
Brand:Hobart
 Select Extended Service Plan

 $1,422.47
Qty:  
Hobart 500491 Champion 4500 8 HP Welder/Generator Outfit, 4,500 watts surge generator power, 4,000 watts continuous generator power, 140 amp AC welder for up to 1/8 in diameter AC stick electrodes, Rugged and lightweight - 190 lbs (500491 500 491, 500-491, 50049, HOB-500491)
Hobart 500491 Champion 4500 8 HP Welder/Generator Outfit, 4,500 watts surge generator power, 4,000 watts continuous generator power, 140 amp AC welder for up to 1/8 in diameter AC stick electrodes, Rugged and lightweight - 190 lbs (500491 500 491, 500-491, 50049, HOB-500491)
Sku: 500491
Brand:Hobart
 Select Extended Service Plan

 $1,158.47
Qty:  
Hobart 500304 IronMan 210 MIG Welder, 230VAC, 60Hz, Welds 22 gauge up to 3/8” in single pass; Rated Output : 150A, 23 VDC at 40% duty cycle; Current Range : 30 - 210 A; Maximum Open-Circuit Voltage : 33 V; Wire Feed Speed Range : 90 - 750 IPM; Processes : MIG (GMAW), Flux Cored (FCAW) (500 304, 500-304)
Hobart 500304 IronMan 210 MIG Welder, 230VAC, 60Hz, Welds 22 gauge up to 3/8” in single pass; Rated Output : 150A, 23 VDC at 40% duty cycle; Current Range : 30 - 210 A; Maximum Open-Circuit Voltage : 33 V; Wire Feed Speed Range : 90 - 750 IPM; Processes : MIG (GMAW), Flux Cored (FCAW) (500 304, 500-304)
Sku: 500304
Brand:Hobart
 Select Extended Service Plan

 $1,147.44
Qty:  
Hobart 500 527 Handler 187 230 VAC, Single-Phase Wire Welding Package with Small Running Gear/Cylinder Rack, 7 voltage selections, enhanced magnetics and infinite wire feed speed control, Welds 24 gauge up to 5/16 inch steel, Door chart with initial settings (500527 500-527)
Hobart 500 527 Handler 187 230 VAC, Single-Phase Wire Welding Package with Small Running Gear/Cylinder Rack, 7 voltage selections, enhanced magnetics and infinite wire feed speed control, Welds 24 gauge up to 5/16 inch steel, Door chart with initial settings (500527 500-527)
Sku: 500527
Brand:Hobart
$769.44
Qty:  
Hobart 500421 model Stickmate LX235 Welder Arc Welding Power Source, 230 Volt, 225 A at 20% Duty Cycle, 60 Hz, 235 amp AC output, 160 amp DC output, 15 ft electrode cable, 10 ft work cable, Infinite current control allows the operator to adjust output by as little as 1-amp increments, Output selector switch to quickly select low or high range without adjusting the output leads (Stickmate-LX235 5000421 Stickmate LX235)
Hobart 500421 model Stickmate LX235 Welder Arc Welding Power Source, 230 Volt, 225 A at 20% Duty Cycle, 60 Hz, 235 amp AC output, 160 amp DC output, 15 ft electrode cable, 10 ft work cable, Infinite current control allows the operator to adjust output by as little as 1-amp increments, Output selector switch to quickly select low or high range without adjusting the output leads (Stickmate-LX235 5000421 Stickmate LX235)
Sku: 500421
Brand:Hobart
 Select Extended Service Plan

 $642.59
Qty:  
Hobart 500505 Handler 140 Mig Welder with Small Cart, 40-700 IPM Wire Feed Speed Range and 50-740 IPM at no load, 28 V Max. Open-Circuit Voltag, Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding, Proven built-in wire feeder with quick-release drive roll lever (500 505 500-505 50050 HOB-500505)
Hobart 500505 Handler 140 Mig Welder with Small Cart, 40-700 IPM Wire Feed Speed Range and 50-740 IPM at no load, 28 V Max. Open-Circuit Voltag, Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding, Proven built-in wire feeder with quick-release drive roll lever (500 505 500-505 50050 HOB-500505)
Sku: 500505
Brand:Hobart
 Select Extended Service Plan

 $569.06
Qty:  
Hobart 500440 Model HSW-15 Spot Welder 110-Volt, 22lbs. (500-440 50044 5004 HOB-500440)
Hobart 500440 Model HSW-15 Spot Welder 110-Volt, 22lbs. (500-440 50044 5004 HOB-500440)
Sku: 500440
Brand:Hobart
 Select Extended Service Plan

 $517.31
Qty:  
Hobart 500500 Handler 140 Mig Welder, Amperage output range of 25 to 140 Amps, 20% duty cycle @ 90 Amps, 19 Volts (500500 500-500 50050 HOB-500500)
Hobart 500500 Handler 140 Mig Welder, Amperage output range of 25 to 140 Amps, 20% duty cycle @ 90 Amps, 19 Volts (500500 500-500 50050 HOB-500500)
Sku: 500500
Brand:Hobart
 Select Extended Service Plan

 $468.87
Qty:  
Hobart 500420 Stickmate LX235 Welder AC 230V without Run Gear, 225 A at 20% Duty Cycle, 60 Hz, 225 A at 15% Duty Cycle, 50 Hz Rated Output at 25% VDC, 80 V Max. Open-Circuit Voltage, High 40 - 235, Low 30 - 150 Welding Amperage Ranges, 85 lb/ 39 kg Net Weight (LX235AC LX-235 500 420)
Hobart 500420 Stickmate LX235 Welder AC 230V without Run Gear, 225 A at 20% Duty Cycle, 60 Hz, 225 A at 15% Duty Cycle, 50 Hz Rated Output at 25% VDC, 80 V Max. Open-Circuit Voltage, High 40 - 235, Low 30 - 150 Welding Amperage Ranges, 85 lb/ 39 kg Net Weight (LX235AC LX-235 500 420)
Sku: 500420
Brand:Hobart
 Select Extended Service Plan

 $342.27
Qty:  
Hobart 500487 Handler 125 Gas Metal Arc Welder 115VAC 60HZ, Self-resetting thermal overload and motor protection; Comfortable 8 ft (2.4 m) H-9 gun with liner for .023-.035 in (0.6-0.9 mm) wire (500-487 50048 5004 HOB-500487)
Hobart 500487 Handler 125 Gas Metal Arc Welder 115VAC 60HZ, Self-resetting thermal overload and motor protection; Comfortable 8 ft (2.4 m) H-9 gun with liner for .023-.035 in (0.6-0.9 mm) wire (500-487 50048 5004 HOB-500487)
Sku: 500487
Brand:Hobart
 Select Extended Service Plan

 $306.79
Qty:  
Hobart 500502 Stickmate 205 AC Welder, 205 Amp, 230 Volt, Fully varnished magnetic coils for enhanced coil reliability and life, Max. 80 Open-circuit voltage assists with arc starting and arc stability (500 502 500-502 50050 HOB-500502)
Hobart 500502 Stickmate 205 AC Welder, 205 Amp, 230 Volt, Fully varnished magnetic coils for enhanced coil reliability and life, Max. 80 Open-circuit voltage assists with arc starting and arc stability (500 502 500-502 50050 HOB-500502)
Sku: 500502
Brand:Hobart
 Select Extended Service Plan

 $222.78
Qty:  
Hobart 770073 Electrode Storage Can, Electrode/Welding Rod Storage Cannister (770 073 770-073 77007 HOB-770073)
Hobart 770073 Electrode Storage Can, Electrode/Welding Rod Storage Cannister (770 073 770-073 77007 HOB-770073)
Sku: 770073
Brand:Hobart
 $16.93
Qty:  
Hobart 770028 Electrode Holder 400 Amp Screw or Stub Type Electrode Holder, Accepts rods up to 5/16", Accepts #2 cable, Electrodes burn within 1" from the head and can be bent to any angle and still be held secure, Quarter turn of the handle loosens the rod for removal or replacement (770 028 770-028 77002 HOB-770028)
Hobart 770028 Electrode Holder 400 Amp Screw or Stub Type Electrode Holder, Accepts rods up to 5/16", Accepts #2 cable, Electrodes burn within 1" from the head and can be bent to any angle and still be held secure, Quarter turn of the handle loosens the rod for removal or replacement (770 028 770-028 77002 HOB-770028)
Sku: 770028
Brand:Hobart
 $6.38
Qty:  

Featured Items:

Panasonic KX-T7736B Advanced Hybrid Speakerphone 24 Button , Black, Navigation key for volume, display, contrast, and function selection, 10 Fixed Buttons for Intercom/Conference, Voicemail, Forward/DND, Flash/Recall, Auto (KXT7736B KXT7736 KXT7736BK KX T7736BK T7736B T7736 KX-T7736)
$164.87
Pioneer AVIC-F700BT In-Dash Navigation AV Receiver with CD Player and Built-In Bluetooth, Use your voice to make calls and control your iPod, Built-In SD Card Slot, USB Direct Control for portable media, 5.8 inch Screen Size, Pixels 800 x 480 (WVGA), Coverage Area US, Canada, Alaska, Hawaii (AVICF700BT AVIC F700BT AVIC-F700B AVIC-F700)
$633.79

Home  -  About  Us  -  Contact Us  -  FAQs  -  Financing  - International Shipping - Policies

Copyright© Sale Stores, All Rights Reserved