TRENDnet TEW-430APB Wireless Access Point 54Mbps 802.11g; Standards: IEEE 802.11g (Wireless LAN), IEEE 802.3u (Fast Ethernet), Media Connector: 10/100Mbps, Half/Full Duplex, LED Indicators: Power, LAN & WLAN, Power: 5V, 1.2A External Power Adapter, Temperature: Operating: -0° ~ 40°C (32° ~104°F), Storage: -10° ~ 70°C (14° ~ 158°F, Humidity: Max. 90% (non-condensing), Certifications: CE, FCC.

---

General Information
Manufacturer	TRENDnet
Manufacturer Part Number	TEW-430APB
Product Line	Wireless LAN
Product Name	TEW-430APB
Marketing Information
TRENDnet’s TEW-430APB Wireless Access Point is today’s link to Wireless Technology. Compliant with the IEEE Wireless Networking Standard 802.11g, it provides Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging and roaming capabilities for wireless nodes. The TEW-430APB also provides WDS bridging functions, allowing users to connect two or more Access Points together, wirelessly. With TRENDnet’s Wireless Access Point and Wireless Network Adapters, users can connect to Ethernet/Fast Ethernet LAN at home or office to access network resources such as hard drives, CD-ROM/DVD drives, network printers, and Internet connection - with coverage up to 300 meters.
Features
Operates as Access Point or WDS Wireless Bridge/Repeater mode
Provides Security with 64/128-Bit WEP and WPA
Supports 802.1x Authentication and MAC Address Control for Authorization Access (20 entries)
Supports Most Operating Systems, such as Windows 95/98/ME/NT/2000/XP, Unix and Mac
Allow Users to Disable ESSID Broadcast to Increase Wireless Security
Built-in 10/100Mbps Auto-Sensing Fast Ethernet Port
Dynamic Data Rate Scaling at 54, 48, 36, 24, 18, 12, 9 and 6 Mbps for 802.11g
Dynamic Data Rate Scaling at 11, 5.5, 2 and 1 Mbps for 802.11b
Allow Auto Fallback Data Rate for Optimized Reliability, Throughput and Transmission Range
2dBi Detachable Diversity Antenna. Replace with Optional High-Gain Antenna to Extend the Range/Coverage Area.
Easy Configuration and Maintenance with Web Browser (HTTP)
Flash Memory for Firmware Upgrade and Save/Restore Settings
Distance coverage 50 to100 meters indoor, 100 to 300 meters outdoors depending on the environment
*Note: Since the radio power output of the TEW-430APB is split between one internal and one external antenna, the replacement of the external antenna with a higher gain solution provides limited performance gain over the current 2dBi antenna range. As a result, if you are planning to use a high-gain antenna with the TEW-430APB Access Point, please consider the TEW-450APB.
Specifications
Hardware	Standards: IEEE 802.11g (Wireless LAN) IEEE 802.3u (Fast Ethernet) Media Connector: 10/100Mbps, Half/Full Duplex LED Indicators: Power, LAN & WLAN Power: 5V, 1.2A External Power Adapter Dimensions: 124 x 86 x 40 mm (4.9 x 3.4 x 1.6 inches) (without antenna) Weight: 118g (0.26 lb) Temperature: Operating: -0° ~ 40°C (32° ~104°F) Storage: -10° ~ 70°C (14° ~ 158°F) Humidity: Max. 90% (non-condensing) Certifications: CE, FCC
Wireless	Frequency Range: 2.412 ~ 2.484 GHz Modulation: 802.11b: DSSS 802.11g: DBPSK/DQPSK/CCK/OFDM Protocol: CSMA/CA with ACK Data Rates (Auto Fallback) : 802.11b: 11, 5.5, 2 and 1Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps Operating Mode: AP, WDS Bridge & Repeater Channel: 1~ 14 Channels (Universal Support) Security: 64/128-bit WEP (Hex) & WPA 802.1x Authentication & MAC Address Access Control List (ACL) Antenna: 1 x 2dBi Detachable Diversity Antennas with Female Reverse SMA Connector Output Power: 13 dBm (min) Transmit Power: 802.11b: 12dBm (typically) 802.11g: 15dBm (typically) Receiving Sensitivity: 54Mbps: -68dBm @ 10% PER (Packet Error Rate) 11Mbps: -81dBm @ 8% PER (Packet Error Rate)
Networking Solution

A-20051108-1357-116-E
M-20060516-1357-138-E
M-20071216-1357-107-E

*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.