Tripp Lite SMART-2200NET
SmartPro 2200 UPS System; 2200 VA (1,700 watts) power capacity , Up to 8
hours of backup power , Standby UPS protection for networks and servers,
SNMP manageable , 4 levels of automatic voltage regulation.
General
Information |
Manufacturer |
Tripp Lite |
Manufacturer Part
Number |
SMART-2200NET |
Product Line |
UPS System |
Product Name |
SMART-2200NET SmartPro 2200 UPS System; 2200 VA (1,700 watts) power
capacity , Up to 8 hours of backup power , Standby UPS protection for
networks and servers |
Tripp Lite's
SMART2200NET intelligent, line interactive large tower UPS system
protects servers, networking accessories and telecommunications
equipment from blackouts, voltage fluctuations and transient surges.
Large internal batteries offer 27 minutes half load runtime and 11
minutes fully loaded. Runtime is expandable with optional BP24V33
external battery packs. 2200VA / 1700 watt power handling capability
supports a variety of networking, telecom and other sensitive
electronic applications. Includes 6 protected outlets. Supports remote
monitoring of UPS and site power conditions via built-in RS-232
enabled monitoring port, plus standard UPS monitoring via 2 built in
contact closure ports. Includes PowerAlert UPS monitoring and
unattended shutdown software with complete cabling. Supports SNMP with
optional external SNMPWEBSOLO adapter. Built-in audible alarm and
front panel LEDs indicate line power, battery power, battery charge
level, load level, plus voltage regulation status. Network grade AC
surge suppression protects equipment from damage and performance
problems resulting from transient surges. |
Features &
Benefits |
- SMART2200NET line interactive
UPS offers battery derived AC output during power outages,
voltage regulation during brownouts and overvoltages, plus
network-grade AC surge suppression
- 2200VA / 1700 watt power
handling capability supports a variety of networking, telecom
and other sensitive electronic devices
Large internal batteries offer runtimes of 27 minutes at half
load (1100VA / 850 watts) and 11 minutes at full load (2200VA /
1700 watts)
- Runtime is further expandable
with optional external BP24V33 battery packs (output VA is
derated as external battery packs are added, see specifications)
- Automatic Voltage Regulation (AVR)
circuits maintain 120V nominal output over an input voltage
range of 87-140V
- Includes 6 fully protected
NEMA 5-15R outlets with 2 single outlet load banks that can be
individually powered off and back on again via software
interface
- PowerAlert UPS monitoring and
unattended shutdown software enables configurable network
broadcast messaging, pager & email notification, event logging
and running user defined script commands
- Offers simultaneous monitoring
of up to 3 directly connected devices through included DB9
contact closure and RS-232 enabled interfaces, or the monitoring
of any number of additional servers over IP with included
PowerAlert monitoring software
- In addition to the contact
closure monitoring of on battery, low battery and power restored
messaging, built-in RS-232 interface supports messaging of UPS
and line power status, including AC line voltage, DC battery
voltage and remaining battery capacity
- Supports activate self-test
and UPS output power control for scheduled or immediate reboot
of connected equipment
- Diagnostic LEDs (indicate 17
performance conditions)
|
Specifications |
SYSTEM OVERVIEW
|
System overview: |
Line interactive
tower UPS protects internetworking and telecommunications
equipment from blackouts, brownouts, overvoltages, surges and line
noise. Maintains AC output during blackouts and continuously
corrects brownouts and overvoltages from 87 to 140 volts back to
normal 120V levels. Supports external battery packs for extended
runtime. Includes 3 built-in DB9 serial ports, PowerAlert UPS
monitoring software and two customized load management receptacles. |
Voltage
compatibility: |
120 V AC |
Frequency
compatibility: |
60 Hz |
OUTPUT |
Output volt amp
capacity (VA):
|
2200
|
Output watt capacity (watts):
|
1700
|
Output nominal voltage:
|
120V AC
|
Output voltage regulation:
|
LINE MODE: Sine wave line voltage 120V
(-13% / +5%)
BATTERY MODE: PWM sine wave output 120V +/-5%
|
Output frequency regulation:
|
LINE MODE: Passes line frequency of
60Hz +/-10%
BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
|
Outlet quantity / type:
|
6 NEMA 5-15R
|
Customized load management receptacles:
|
3 serial ports
|
Overload protection:
|
Via 20A input breaker
|
INPUT
|
Maximum input amps:
|
15A, 1770 watts
|
Input connection type:
|
NEMA 5-15P
|
Input cord length:
|
8 ft., 12 gauge
|
Recommended electrical service:
|
20A 120V
|
BATTERY
|
Full load runtime:
|
11 minutes (2200VA)
|
Half load runtime:
|
27 minutes (1100VA)
|
Expandable battery runtime:
|
Supports extended runtime with
optional BP24V33 external battery pack (multi-pack compatible).
Capacity de-rates to 1600VA / 1280 watts with 1 external BP and
1250VA / 800 watts with 2 external BPs
|
DC system voltage:
|
24 V DC
|
Typical battery lifespan:
|
3-6 years, depending on usage
|
Battery recharge rate:
|
2-4 hours to 90%
|
VOLTAGE REGULATION
|
Voltage regulation description:
|
Line interactive UPS offers 2
boost levels of brownout correction and a single level of
overvoltage adjustment to maintain usable, computer grade output
without consuming battery power.
|
Overvoltage correction:
|
Input voltages between 127 and 140V AC are
reduced by 12%
|
Direct pass through:
|
Input voltages between 110 and 127V AC are
passed through unchanged
|
Brownout correction:
|
Input voltages between 95 and 105V AC are
boosted by 10%
|
Severe brownout correction:
|
Input voltages between 87 and 94V AC
are boosted by 22%
|
LEDS ALARMS & SWITCHES
|
Front panel LEDs:
|
Includes 5 front panel LEDs to indicate BATTERY
CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS
LOAD LEVEL and BATTERY LOW / REPLACE information
|
Alarms:
|
Audible alarm with 15 second delay sounds to indicate loss
of utility power. Alarm can be silenced by pressing front panel
alarm cancel button. Once silenced, alarm will re-sound when
approximately 2 minutes runtime remain.
|
Switches:
|
Includes 2 front panel switches — one on/standby power
switch and one dual function "alarm cancel" / "self test" button,
plus 1 rear panel system enable switch
|
SURGE / NOISE SUPPRESSION
|
AC surge suppression:
|
480 joules
|
AC suppression response time:
|
Instantaneous
|
EMI / RFI AC noise suppression:
|
Yes
|
PHYSICAL
|
Shipping weight (lbs):
|
87
|
Shipping weight (kg):
|
39.5
|
Unit weight (lbs):
|
80
|
Unit weight (kg):
|
36.3
|
Unit Dimensions (HWD/in):
|
17 x 9 x 12.5
|
Unit Dimensions (HWD/cm):
|
41.9 x 22.9 x 31.1
|
Shipping Dimensions (HWD/in):
|
22.25 x 12.75 x 16.5
|
Shipping Dimensions (HWD/cm):
|
57.2 x 32.4 x 42
|
Material of construction:
|
Polycarbonate
|
Form factors supported:
|
Tower
|
Cooling method:
|
Convection
|
ENVIRONMENTAL
|
Operating Temperature:
|
+32 to +104 degrees Fahrenheit
0 to +40 degrees Celsius
|
Storage Temperature:
|
+5 to +122 degrees Fahrenheit
-15 to +50 degrees Celsius
|
Relative Humidity:
|
0 to 95%, non-condensing
|
Line mode BTU/hr. (Max.):
|
148.2
|
Battery mode BTU/hr. (Max.):
|
502.6
|
COMMUNICATIONS
|
Network monitoring port:
|
Includes 3 built-in DB9 monitoring ports,
1 enabled with RS-232 data communications and 2 with standard
contact closure communications. All interfaces support on battery,
low battery and power restored messaging. RS-232 enabled port adds
data regarding AC line voltage, DC battery voltage, load
percentage, battery charge current, battery capacity, internal UPS
temperature and line frequency status messaging. Supports
individual reboot of selected items connected to load management
receptacles and load shedding to increase battery runtime for the
most critical loads.
|
Software and cabling included:
|
Includes PowerAlert UPS monitoring
software for all common network and standalone operating systems.
|
SNMP compatibility:
|
Yes via external SNMP adapter accessory
#SNMPWEBSOLO
|
LINE / BATTERY TRANSFER
|
Transfer time from line power to battery mode:
|
2-4 milliseconds
|
Low voltage transfer to battery power:
|
Switches to battery power
as line voltage decreases to 87 volts or less
|
High voltage transfer to battery power:
|
Switches to battery power
as line voltage increases to 140 volts or higher.
|
CERTIFICATIONS
|
Certifications:
|
UL1778 (USA), cUL (Canada), FCC Class A
(emissions), NOM (Mexico)
|
SPECIAL FEATURES
|
Appearance:
|
Attractive gray tower UPS
|
BATTERY PACK ACCESSORY (optional)
|
Battery Pack Accessory (optional):
|
BP24V33 |
A-20040206-1041-110-L
M-20051215-1186-111-E
M-20060717-1071-117-E
*This
item is BRAND NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty. |