General Information

Manufacturer

Manufacturer Part Number

Features

• Dual temperature models equipped with two self-contained, independent refrigeration systems
• 23 cu. ft. refrigerator on left holds 33°F to 38°F; 23 cu. ft. freezer on right holds -10°F
• Comes standard with dual, exterior mounted digital thermometers
• 300 series stainless steel exterior front and interior floor; aluminum sides, back, and top
• Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam
• Positive seal self-closing doors with lifetime guaranteed hinges and closure system
• Door locks and 4" diameter swivel casters standard
• Features 2 full length solid swing doors
• 6 Adjustable vinyl coated wire shelves support up to 250 lbs. each
• Oversized condenser and evaporator reduce product pull down time and consistently maintain 33°F to 38°F interior cabinet temperature
• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion
• Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet, cord and plug set included
• Sole use circuit required

Specifications

• Two independent, self-contained refrigeration systems CFC free environmentally friendly and factory balanced. 134A refrigerator refrigerant - R404A freezer refrigerant.
• Bottom mounted condensing units - easy access for maintenance.
• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain 33°F to 38°F (refrigerator) and -10°F (freezer) interior cabinet temperature. (non- djustable capillary tube system superior to problematic expansion valve)
• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

Cabinet Construction

• 300 series stainless steel front grill, shroud and doors. Anodized quality aluminum exterior ends and back.
• NSF approved, white vinyl coated aluminum and 300 series stainless floor with coved corners.
• Barrel locks standard. Locks keyed alike. Digital exterior mounted temperature monitors for both refrigerator and freezer.
• Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection. Frame rail fitted with 4" diameter castors, front castors include brakes.

Doors

• 300 series stainless steel exterior with white aluminum interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.
• Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 12" long recessed handle with sheet metal interlock. Handles are foamed-in-place to insure permanent attachment.

Insulation

• Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

Shelving

• Adjustable vinyl coated wire shelves (3 per section). Shelves capable of supporting up to 250 lbs.
• Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Lighting

• Compartmentalized, incandescent interior lighting. Lights activated by rocker switch mounted above door(s).

Electrical Characteristics

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.