|
ACTi A28 Box with D/N, Extreme WDR,
ELLS, Fixed Lens, 2MP; CS mount; Terminal block for digital
input and output; RS-485 port; PTZ protocols (Pelco D, Pelco P,
ACTi URL command); Compatible with Internet Explorer 11;
Automatic firmware upgrades; Pole, ceiling, corner, and wall
mountable; CE and FCC certified; Built-in tampering detection;
Audio input and output; Fully compatible with ACTi software;
100M RJ45 Ethernet port; Server-based analytics include: object
line counting, people counting, face detection, object-based
motion detection, tamper, object line crossing detection, object
enter area detection, missing object detection, unattended
object detection, smoke detection, heat mapping, dwell time, and
people queue detection (VMS required, available separately);
Privacy masking for up to 4 configurable regions; Mechanical IR
cut filter enables day and night functionality; 700 to 1150nm IR
sensitivity; H.265, H.264, and MJPEG video codecs; Simultaneous
triple streams based on three configurations; CBR and VBR; Flip,
rotation, and mirror orientation: Image enhancements include;
white balance, brightness, backlight compensation (BLC), strong
light suppression, contrast, saturation, sharpness, automatic
gain control, flickerless, digital image stabilizer (DIS, EIS),
and defogging; 2D-DNR and 3D-DNR; Fully compatible with ACTi
software; 142 dB wide dynamic range; 56 dB S/N ratio; Event
triggers include: video motion detection (three regions),
external device through digital input, sound detection, and
tamper detection; Event responses include: notify control
center, change camera settings, command other devices, email
notification with snapshots, play the audio file, save video to
local storage, upload video to NVR server, upload video or
snapshot to FTP server, and activate external device through
digital output; Dimensions: 5.06" x 2.28" x 2.44"; Weight: 2.2
pounds
|
General
Information
|
|
Manufacturer
|
ACTi
|
|
Manufacturer Part Number
|
A28
|
|
Product Name
|
Box
with D/N, Extreme WDR, ELLS, Fixed Lens, 2MP
|
|
UPC Code
|
888034014022
|
| Overview |
Monitor your room with the
A28 2MP Network Box Camera from ACTi. The A28 uses a
0.6" progressive scan CMOS image sensor to capture 1920
x 1080 resolution video at 60 fps. Featuring a CS mount,
this unit comes with a 2.8mm fixed lens that delivers a
107.7 degrees horizontal field of view. 2-way audio
communication is possible thanks to an audio input and
output. An onboard memory card slot accepts
microSD/SDHC/SDXC cards up to 256GB (available
separately). Integrated PoE technology simplifies
connectivity by transferring data and power through a
single cable
This camera complies with ONVIF profiles G, Q, S, and T,
making it compatible with a wide range of surveillance
devices |
|
Features
|
- CS mount
- Terminal block for
digital input and output
- RS-485 port
- PTZ protocols (Pelco D,
Pelco P, ACTi URL command)
- Compatible with Internet
Explorer 11
- Automatic firmware
upgrades
- Pole, ceiling, corner,
and wall mountable
- CE and FCC certified
- Built-in tampering
detection
- Audio input and output
- Fully compatible with
ACTi software
- 100M RJ45 Ethernet port
- Server-based analytics
include: object line counting, people counting, face
detection, object-based motion detection, tamper,
object line crossing detection, object enter area
detection, missing object detection, unattended object
detection, smoke detection, heat mapping, dwell time,
and people queue detection (VMS required, available
separately)
- Privacy masking for up
to 4 configurable regions
- Mechanical IR cut filter
enables day and night functionality
- 700 to 1150nm IR
sensitivity
- H.265, H.264, and MJPEG
video codecs
- Simultaneous triple
streams based on three configurations
- CBR and VBR
- Flip, rotation, and
mirror orientation: Image enhancements include, white
balance, brightness, backlight compensation (BLC),
strong light suppression, contrast, saturation,
sharpness, automatic gain control, flickerless,
digital image stabilizer (DIS, EIS), and defogging
- 2D-DNR and 3D-DNR
- Fully compatible with
ACTi software
- 142 dB wide dynamic
range
- 56 dB S/N ratio
- Event triggers include:
video motion detection (three regions), external
device through digital input, sound detection, and
tamper detection
- Event responses include:
notify control center, change camera settings, command
other devices, email notification with snapshots, play
the audio file, save video to local storage, upload
video to NVR server, upload video or snapshot to FTP
server, and activate external device through digital
output
|
|
Specifications
|
|
Device
|
| Product Type |
Box |
| Maximum Resolution |
2MP |
| Application Environment |
Indoor/Outdoor |
| Image Sensor |
Progressive Scan CMOS |
Sensor Size
|
0.6" |
| Effective Pixels |
1945 (H) x 1097 (V) (2.13 MP) |
| Day / Night |
Yes |
| Low Light Sensitivity |
Extreme |
| Minimum Illumination |
Color: 0.05 lux at F1.4
B/W 0.005 lux at F1.4 (AGC on) |
| Color to B/W Switch |
ISP based switch, configurable |
| Mechanical IR Cut Filter |
Yes |
| IR Sensitivity Range |
700-1150nm |
| IR LED |
No |
| Electronic Shutter |
1/5-1/64000 second (manual mode)
1/5-1/64000 second (auto mode) |
| Horizontal Resolution (TV Lines) |
1000 TVL |
| S/N Ratio |
56 dB |
| Lens |
| Focal Length |
Fixed focal, f2.8mm |
| Aperture |
F1.8 |
| Iris |
Fixed iris |
| Focus |
Auto back focus |
| Lens Mount |
CS Mount (interchangeable lens) |
| Horizontal Viewing Angle |
107.7 degrees
|
| Vertical Viewing Angle |
60 degrees |
| PTZ |
| Pan, Tilt or Zoom protocol |
Pelco-D, Pelco-P, ACTi URL command |
| Video |
| Compression |
H.265, H.264 (Main profile), MJPEG |
| Maximum Frame Rate vs. Resolution |
60 fps at 1920 x 1080
30 fps at 1280 x 960
60 fps at 1280 x 720
30 fps at 800 x 600
30 fps at 720 x 480
30 fps at 640 x 480
30 fps at 320 x 240 |
| Multi-Streaming |
Simultaneous triple streams based on three
configurations |
| Bit Rate |
28Kbps to 12Mbps (per stream) |
| Bit Rate Mode |
Constant, Variable |
| Wide Dynamic Range |
Extreme WDR (142 dB) |
| Image Enhancement |
White Balance, Brightness, Backlight
compensation (BLC), Strong Light Suppression,
Contrast, Saturation, Sharpness, Automatic gain control,
Flickerless, Digital Image Stabilizer (DIS, EIS),
Defogging |
| Digital Noise Reduction |
2D + 3D DNR |
| Privacy Mask |
4 configurable regions |
| Text Overlay |
Yes |
| On-Screen Graphics |
Yes |
| Built-in Analytics |
Tampering Detection |
| Server-based Analytics |
Object Line Counting, People Counting, Face
Detection, Object Based Motion Detection, Tamper, Object
Line Crossing Detection, Object Enter Area Detection,
Missing Object Detection, Unattended Object Detection,
Smoke Detection, Heat Map, Dwell Time, People Queue
Detection, (Require PC-based or standalone IVS or ALPR
Server. Contact ACTi support for recommendations on how to
maximize analytical accuracy) |
| Image Orientation |
Flip, Mirror, Rotation |
| Audio |
| Audio Type |
2-way, Mic-in, Line-in, Line-out |
| Audio Compression |
8 kHz, Mono, G.711 |
| Network |
| Network Protocol and Service |
IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP,
HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP,
ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X |
| Ethernet Port |
1 x Ethernet (10/100 Base-T), RJ-45
connector |
| Security |
IP address filtering, HTTPS encryption,
Password protected user level, Anonymous login |
| Video Analytics |
| Analysis Source Type |
Video |
| Event |
| Event Trigger |
Video motion detection (3 regions),
External device through digital input, Sound detection,
Tampering detection |
| Event Response |
Notify control center, Change camera
settings, Command other devices, E-mail notification with
snapshots, Play the audio file, Push notification to
mobile device, Save video to local storage, Upload video
to NVR server, Upload video or snapshot to FTP server,
Activate external device through digital output |
| Integration |
| Unified Solution |
Fully compatible with ACTi software |
| GPS Position |
Manual setting |
| ONVIF Compliant |
Yes, Profile S, Profile G, Profile T,
Profile Q |
| Web Browser |
IE 11 |
| Auto Firmware Upgrade |
Yes |
| Interface |
| Serial Port |
1 x RS-485 |
| Audio Interface |
1/1, Terminal block |
| Local Storage |
MicroSDHC, MicroSDXC Memory Card Slot
(card not included, up to 256GB) |
| Digital Input/Output |
1/1 (Terminal block) |
| General |
| Power Source |
DC 12V PoE Class 3 (IEEE802.3af) |
| Power Consumption |
12.95 W (PoE) |
| Environmental Casing |
Optional housing (IP66-IP68) |
| Mount Type |
Wall Mount, Ceiling Bracket, Corner Mount,
Pole Mount |
| Starting Temperature |
14 to 122 degrees fahrenheit
|
| Operating Temperature |
14 to 122 degrees fahrenheit |
| Operating Humidity |
10 to 90 percent RH |
| Approvals |
CE, FCC |
Dimensions and Weight
|
| Dimensions |
5.06" x 2.28" x 2.44" |
| Weight |
2.2 pounds |
A-20210630-1869-130-L
M-20210729-1869-200-L
*This item
is BRAND NEW - not refurbished. It comes with all
manufacturer supplied accessories, and full manufacturer's
USA warranty.
|
