Adaptec 2170000-R
Serial ATA II RAID 2820SA Card, Hot Space (RAID
5EE), Striped Mirror (RAID
1E), Dual Drive
Failure Protection (RAID 6, 60), Copyback Hot
Spare, Eight ports
support up to eight Serial ATA and Serial ATA II drives, PCI-X 64-bit/133
MHz host interface (3.3 volts only), Half-size PCI
form factor, RoHS compliant, Supported Operating Systems Microsoft
Windows, Red Hat Linux, SUSE Linux, FreeBSD, Novell Netware, Solaris, SCO
UnixWare, OpenServer.
General Information |
Manufacturer |
Adaptec |
Manufacturer Part Number |
2170000-R |
Product Name |
Card |
Marketing Information |
Serial ATA II (SATA II), the successor to
SATA technology for data storage, is a point-to-point connection that
delivers full throughput to each storage device by allowing multiple
ports to be managed by a single controller. Adaptec SATA II technology
delivers data transfer rates with 3 Gb/s while also supporting 1.5 Gb/s
(SATA I).
The Adaptec Serial ATA II RAID 2820SA card is an eight-port controller
that supports SATA or SATA II direct attached disk drives. It features
the Adaptec AIC-8210 SATA RAID-on-Chip (ROC) ASIC and Adaptec RAID Code
(ARC) with standard RAID 0, 1, 5, 10, 50, and JBOD, as well as the
Adaptec Advanced Data Protection Suite with RAID 1E, 5EE, 6, 60,
Copyback Hot Spare and optional Snapshot Backup. With the industry's
most advanced feature set, the Adaptec 2820SA provides the highest level
of data protection. |
Features |
-
Hot Space (RAID
5EE)
-
Striped Mirror (RAID
1E)
-
Dual Drive
Failure Protection (RAID 6, 60)
-
Copyback Hot
Spare
-
Eight ports
support up to eight Serial ATA and Serial ATA II drives
-
PCI-X 64-bit/133
MHz host interface (3.3 volts only)
-
Standard Features:
RAID 0, 1, 10, 5, 50, and JBOD, hot swap, hot spares, Online
Capacity Expansion, RAID Level Migration, Optimized Disk Utilization
and the Adaptec Advanced Data Protection Suite with RAID 1E, 5EE, 6,
60 and Copyback Hot Spare
-
Half-size PCI
form factor
-
RoHS compliant
|
Specifications |
Supported Operating Systems |
Microsoft Windows
Red Hat Linux
SUSE Linux
FreeBSD
Novell Netware
Solaris
SCO UnixWare, OpenServer |
System Environment |
Departmental and workgroup servers and
workstations |
Bus System Interface Type |
PCI-X 64-bit/133 MHz host interface (3.3v
only) |
Internal Connectors |
8 locking SATA connectors |
Data Transfer Rate |
Up to 3 Gb/s per port |
System Requirements |
Intel or AMD architecture with available
64-bit 3.3v PCI-X slot
Supports EM64T and AMD64 architectures |
Standard RAID levels |
RAID 0, 1, 5, 10, 50, and JBOD |
Board Dimensions |
3.1in H x 6.6in L
7.87cm H x 16.76cm L |
Operating Temperature |
0 to 55 degrees C |
Regulatory Certification |
FCC, UL, C-tick, CE, VCC
|
M-20080930-1208-149-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|