|
AFL OFL280-103U-PRO Model
OFL280-103 FlexTester Hand-held Multifunction OTDR and Loss Test
Set With UPC inspection Adapter Tips, Blue, Patented in- or
out-of-service OTDR testing from a single port, Icon-based
LinkMap display with pass/fail for easy network analysis,
ServiceSafe live PON detection and OTDR test without service
disruption, UPC AFLOFL280103UPRO, Wave ID reduces insertion loss
test time and eliminates setup errors, 34/32dB dynamic range at
1310/1550nm, Best-in-class 0.8/3.5m event/attenuation dead
zones, Rugged device, Hand-held and lightweight, High-contrast
backlit display, 12 Hours continuous operation battery life,
Tester is ready to test in less than 5 seconds, Cost-effective
point-to-point and FTTH PON testing, Troubleshoot in-service
FTTH networks, including live PON power measurements plus PON
OTDR testing at 1625nm, Complete multi-wavelength insertion loss
tests faster and eliminate setup errors using Wave ID source and
power meter, Generate fiber-identifying tones and stable CW
signals using integrated optical source, Trace fibers or locate
faults using the Visual Fault Locator, Dimensions 7.9" x 5.1" x
2.1", Weight 1.8 pounds
|
General Information
|
|
Manufacturer
|
AFL
|
|
Manufacturer Part Number
|
OFL280-103U-PRO |
|
Product Name
|
Model
OFL280-103 FlexTester Hand-held
Multifunction OTDR and Loss Test Set With UPC
inspection
Adapter Tips, Blue |
| UPC Code |
AFLOFL280103UPRO |
|
Overview
|
The OFL280 FlexTester
PRO kit combines a
user-specified OFL280 FlexTester with a FOCIS Fiber Optic
Connector Inspection System and selected cleaning supplies
conveniently packaged in a rugged, waterproof, hard carry
case. Each kit includes two One-Click Mini-500 Cleaners
(1.25 and 2.5mm), FCC2 cleaning fluid, 20-pack tube of
ferrule cleaning sticks and 40 pack tubes of 1.25 and
2.5mm bulkhead adapter cleaning sticks
|
|
Features
|
- Blue color
- Patented in- or
out-of-service OTDR testing from a single port
- Icon-based LinkMap
display with pass/fail for easy network analysis
- ServiceSafe live PON
detection and OTDR test without service disruption
- Wave ID reduces
insertion loss test time and eliminates setup errors
- 34/32dB dynamic range at
1310/1550nm
- Best-in-class 0.8/3.5m
event/attenuation dead zones
- Rugged device
- Hand-held and
lightweight
- High-contrast backlit
display
- 12 Hours continuous
operation battery life
- Tester is ready to test
in less than 5 seconds
- Cost-effective
point-to-point and FTTH PON testing
- Troubleshoot in-service
FTTH networks and including live PON power
measurements plus PON OTDR testing at 1625nm
- Complete
multi-wavelength insertion loss tests faster and
eliminate setup errors using Wave ID source and power
meter
- Generate
fiber-identifying tones and stable CW signals using
integrated optical source
- Trace fibers or locate
faults using the Visual Fault Locator
|
|
Specifications
|
OTDR
|
|
Emitter
Type
|
Laser |
Safety
Class
|
Class
I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03 |
Fiber
Type
|
Single-mode |
Available
Wavelengths
|
1310/1490/1550/1625
nm |
Wavelength
Tolerance
|
Plus
or minus 20/Plus or minus 20/Plus or
minus 20/Plus or minus 10 nm |
Dynamic
Range (SNR=1)
|
34/32/32/30
dB |
Event
Dead Zone
|
0.8 m |
Attenuation
Dead Zone
|
3.5 m
|
Pulse
Widths
|
5,
10, 30, 100, 300 ns, 1, 3, 10 µs
|
| Range Settings |
250 m to 240 km |
| Data Points |
Up to 30,000 |
| Data Point Spacing |
5.0 cm (range less
than 1.5 km), Range/30,000 (range greater than 1.5 km) |
Group Index of
Refraction (GIR)
|
1.4000 to 1.7000 |
Distance Uncertainty
(m)
|
Plus
or minus (1 + 0.005 percent x distance
+ data point spacing) |
| Linearity |
Plus or minus 0.05
dB/dB |
| Trace File Format |
.SOR per Telcordia
SR-4731 Issue 2 |
| Trace File Storage |
Medium 4GB internal
memory (>1000 traces) |
| Data Transfer to PC |
USB cable |
PON OTDR Modes
|
Test to splitter or
through splitter |
Standard OTDR Modes
|
Full Auto, Expert,
Real Time |
LASER SOURCE
|
|
| Emitter Type |
Class I FDA 21 CFR
1040.10 and 1040.11, IEC 60825-1: 2007-0 |
| Fiber Type |
Single-mode |
| Available
Wavelengths |
1310, 1490, 1550 nm
|
| Wavelength Tolerance |
Plus or minus 20 nm
|
| Spectral Width
(FWHM) |
5 nm (maximum) |
| Internal Modulation |
270 Hz, 330 Hz, 1
kHz, 2 kHz, CW |
| Wavelength ID (one,
two, or three wavelengths) |
Compatible with AFL
Optical Power Meters and Light Sources |
Output Power
Stability 0.25 dB
|
Output Power |
| Output Power |
-1 dBm (1310, 1550
nm) plus or minus 1.5 dB; +3 dBm (1490 nm ) plus or minus
1.5 dB |
| PON POWER METER
FOR SINGLE-MODE ONLY |
|
| Calibrated
Wavelengths |
1490, 1550 nm |
| Detector Type |
Filtered InGaAs |
| Isolation |
More than 40 dB |
| Measurement Range |
+23 to ¡V 50 dBm |
| Accuracy |
Plus or minus 0.5 dB |
| Resolution |
0.01 dB |
| Measurement Units |
dBm or Watts (nW,
µW, mW) |
| OPTICAL POWER
METER |
|
| Calibrated
Wavelengths |
1310, 1490, 1550,
1625, 1650 nm |
| Detector Type |
InGaAs |
| Measurement Range |
+23 to -50 dBm |
| Tone Detect Range |
+3 to -35 dBm |
| Wavelength ID Range
|
+3 to -35 dBm |
| Accuracy |
Plus or minus 0.25
dB |
| Resolution |
0.01 dB |
| Measurement Units |
dB, dBm or Watts
(nW, µW, mW) |
VISUAL FAULT
LOCATOR
|
|
Emitter Type
|
Visible red laser |
| Safety Class |
Class II FDA 21 CFR
1040.10 and 1040.11,
IEC 60825-1: 2007-03 |
Wavelength
|
650 plus or minus 20
nm |
Output Power
(nominal)
|
0.8 mW into
single-mode fiber |
Modes
|
CW, 2 Hz flashing |
GENERAL
|
dB, dBm or Watts
(nW, µW, mW) |
Operational
Temperature
|
-10 ¢XC to +50 ¢XC, 0
to 95 percent RH (non-condensing) |
Storage Temperature
|
-20 ¢XC to +60 ¢XC, 0
to 95 percent RH (non-condensing) |
Power Rechargeable
|
Li-Ion or AC adapter |
Battery Life
|
12 hours, backlight
ON, continuous operation |
Display
|
LCD, 320 x 240, 3.5
inch (89 mm), color, high-contrast transflective with
backlight and AR coating |
| Dimensions (in boot)
|
7.9" x 5.1" x 2.1" |
| Weight |
1.8 Pounds |
A-20170806-1505-212-L
M-20190815-1505-212-L
*This item is
BRAND NEW - not refurbished. It comes with all manufacturer
supplied accessories, and full manufacturer's USA warranty.
|
