AIMS Power PICOGLF4012120240VS Pure Sine Inverter Charger, 4000 Watt, 12Vdc - 120Vac Input and 120/240Vac Split Phase Output; 4000 watt low frequency inverter; 12000 watt surge for 20 seconds 300 percent surge capability; 120/240 VAC output split phase charges with 120 Vac multi-stage smart charger; 115 Amp battery priority selector; AC terminal block; Marine coated and protected; Remote panel available auto frequency; 10msec typical transfer time optional 25W power save mode; 7 battery type settings for charger; Product Dimensions 31.5 x 8.75 x 7.25 inches; Shipping Dimensions 35.5 x 14.50 x 13.50 inches; Product Weight 75 lb; Shipping Weight 87 lb

General Information
Manufacturer	AIMS Power
Manufacturer Part Number	PICOGLF4012120240VS
Product Name	Pure Sine Inverter Charger, 4000 Watt, 12Vdc - 120Vac Input and 120/240Vac Split Phase Output
UPC Code
Overview
Combine this solar inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. If you’re looking for an inverter with similar capabilities but a lower wattage capacity, check out the 2000 watt low frequency AIMS Power inverter charger Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110/120 OR 2208/230/240 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system.  The inverter outputs 120 volts AC. The inverter also charges at 120 Volts The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Click here to purchase the remote. Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment
Features
4000 watt low frequency inverter 12000 watt surge for 20 seconds 300 percent surge capability 120/240 VAC output split phase charges with 120 Vac multi-stage smart charger 115 Amp battery priority selector AC terminal block Marine coated and protected Remote panel available auto frequency 10msec typical transfer time optional 25W power save mode 7 battery type settings for charger
Pictures
Specifications
Output Specifications:
Continuous Output Power	4000 Watts
Surge Rating	12000 Watts (20 Seconds)
Output Waveform	Pure Sine/Same as input (Bypass Mode)
Output voltage	120/240 Vac - Split Phase 60hz
Nominal Efficiency	Greater than 88 percent (Peak)
Line Mode Efficiency	Greater than 95 percent
Output Frequency	60Hz +/- 0.3Hz
Typical Transfer Time	10ms (Maximum)
THD	Less than 10 percent DC
Ambient operating temperature	14F to 122F (-10C to 50C)
Input Specifications
Nominal Input Voltage	12.0 Vdc
Minimum start voltage	10.0 Vdc
Low Battery Alarm	10.5 Vdc - 11.0 Vdc
Low battery Trip	10.0 Vdc - 10.5 Vdc
High Voltage Alarm	16.0 Vdc
Low battery Voltage Restart	15.5 Vdc
Idle Consumption	50 watts
Power Saver Mode Idle Consumption	21 watts
Charger Specifications
Output voltage	Depends on battery Type
Charger Rate	115A Over
Charge Protection Shutdown	15.7V
Selectable Charge setting based on battery type
Adjustable charge current	20 to 100 percent
Four Stage Smart Charger
Transfer Switch Specifications:
Automatic transfer switch (bypass)	40 amp automatic transfer switch
10 ms (max)
Dimensions
Product Dimensions	31.5 x 8.75 x 7.25 inches
Shipping Dimensions	35.5 x 14.50 x 13.50 inches
Product Weight	75 lb
Shipping Weight	87 lb

A-20181116-1751-210-L

*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.