|
Atlas Sound DPA1202 1200 Watt
Networkable Multi Channel Power Amplifier with Optional Dante Network
Audio; Black; Features a combination of flexibility, performance, and
control to provide high value; Preconfigured in a two channel 70V mode.
If the design requires four channels of low impedance amplification, the
amplifier can be configured as 4 channel; Configuration Levels: 2 x 600
Watt 70V, 100V (Factory Default), 4 x 300 Watt, 4 Ohm, 1 x 600 Watt 70V,
100V and 2 x 300 Watt, 4 Ohm; No computer required to operate;
Networkable; Configurable DSP via GUI; PC Based DPA site manager
software with LAN IP auto discovery fault reporting, input and output
status, standby status and amplifier remote activation via a scheduler
timer; Onboard web browser GUI for remote monitoring of status and
levels; User page with assignable level control, post contractor
settings, password protected; Mute assignments triggered via audio
signal or contact closure; Audio sense auto power down (APD); DSP
Parameters per Output, Parametric EQ, Hi & Lo Cut Filters, Delay,
Limiter; Four (4) balanced inputs, expandable to 8 via accessory card;
Optional accessory card slot for a DPA-DAC4 4 Channel Dante receiver or
a DPA-AMIX (2) Mic or Line, (2) AUX Input card; PC, iOS, and Android
controllable; Assignable level controls, onboard GUI (security password
protected) or by front panel pots with tamper deterring covers; Four (4)
GPIO control ports assignable in GUI for mute or remote level;
Controllable from third party controllers; UPC 612079190690;
Dimensions 19.00" x 14.50" x 1.72"; Shipping Dimensions 24.50" x
18.70" x 3.50"; Weight 13.00 lbs; Shipping Weight 17.40 lbs
|
General Information
|
|
Manufacturer
|
Atlas
Sound
|
|
Manufacturer Part Number
|
DPA1202 |
|
Product Name
|
1200 Watt
Networkable Multi Channel Power Amplifier with Optional Dante
Network Audio |
| UPC Code |
612079190690 |
|
Overview
|
Features a
combination of flexibility, performance, and control to provide
high value; Preconfigured in a two channel 70V mode. If the design
requires four channels of low impedance amplification, the
amplifier can be configured as 4 channel
Configuration Levels: 2 x 600 Watt 70V, 100V (Factory Default), 4
x 300 Watt, 4 Ohm, 1 x 600 Watt 70V, 100V and 2 x 300 Watt, 4 Ohm.
No computer required to operate, networkable, configurable DSP via
GUI
PC based DPA site manager software with LAN IP auto discovery
fault reporting, input and output status, standby status and
amplifier remote activation via a scheduler timer. Onboard web
browser GUI for remote monitoring of status and levels
User page with assignable level control, post contractor settings,
password protected. Mute assignments triggered via audio signal or
contact closure
Audio sense auto power down (APD); DSP Parameters per Output,
Parametric EQ, Hi & Lo Cut Filters, Delay, Limiter. Four (4)
balanced inputs, expandable to 8 via accessory card
Optional accessory card slot for a DPA-DAC4 4 Channel Dante
receiver or a DPA-AMIX (2) Mic or Line, (2) AUX Input card, PC,
iOS, and Android controllable
Assignable level controls, onboard GUI (security password
protected) or by front panel pots with tamper deterring covers;
Four (4) GPIO control ports assignable in GUI for mute or remote
level. Controllable from third party controllers |
|
Features
|
- Flexibility, performance, and
control
- DSP controlled 4 channel
amplifiers, configurable
- Configurable for use as 2
Channel 70.7V Amplifier
- Configurable for use as 4
Channel 4 Ohms Amplifier
- Configuration Levels: 2 x 600
Watt 70V, 100V (Factory Default), 4 x 300 Watt, 4 Ohm, 1 x 600
Watt 70V, 100V and 2 x 300 Watt, 4 Ohm
- No computer required to operate
- Networkable
- Configurable DSP via GUI
- PC Based DPA site manager
software with LAN IP auto discovery fault reporting, Input and
Output status, Standby status and amplifier remote activation
via a scheduler timer
- Onboard web browser GUI for
remote monitoring of status and levels
- User page with assignable level
control, post contractor settings, password protected
- Mute assignments triggered via
audio signal or contact closure
- Audio sense auto power down
(APD)
- DSP Parameters per Output,
Parametric EQ, Hi & Lo Cut Filters, Delay, Limiter
- Four (4) balanced inputs,
expandable to 8 via accessory card
- Optional accessory card slot for
a DPA-DAC4 4Channel Dante receiver or a DPA-AMIX (2) Mic or
Line, (2) AUX Input card
- PC, iOS, and Android
Controllable
- Assignable level controls,
onboard GUI (security password protected) or by front panel
pots with tamper deterring covers
- Four (4) GPIO control ports
assignable in GUI for mute or remote level
- Controllable from third party
controllers
|
|
Pictures
|
|
|
Specifications
|
Color
|
Black
|
Power
Output
|
2 x
600-Watts, 70.7V
2 x 600-Watts, 100V
4 x 300-Watts, 4 Ohm
4 x 150-Watts, 8 Ohm
1 x 600-Watts, 70.7V, 2 x 300-Watts,
4 Ohm
1 x 600-Watts, 100V, 2 x 300-Watts, 4
Ohm
|
Amplifier
Topology
|
Class AB
Switching Hybrid BASH
|
Input
Sensitivity
|
750mV
Balanced, 0dBU
|
Input
Impendance
|
Balanced
40k
|
Maximum
Input Signal
|
plus 14dBU
Inputs 1 to 4, plus 7dBU Inputs 5 to 8 with Dante Networking
|
Signal
to Noise Ratio
|
minus 100dB Below Rated output
(A-Weighted)
|
Frequency
Response
|
minus 3dB 20 Hertz to 20 kiloHertz (DSP
Filters Set to Flat)
|
Crosstalk
|
70dB, 1 kiloHertz
|
Voltage
|
110V - 120V and 220V - 240V Auto Switch
Over, 50 or 60 Hertz
|
Idle
Current
|
38 Watts
|
Rack
Espace
|
1 RU, 19.00" Wide
|
Voltage
Compatibility
|
Universal |
| Dimensions |
19.00"
x 14.50" x 1.72" |
| Shipping Dimensions |
24.50"
x 18.70" x 3.50" |
| Weight |
13.00 lbs |
| Shipping Weight |
17.40 lbs |
A-20180424-1338-230-L
*This item is BRAND
NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|
