|
Barco R9828960 Twin Interface, Universal VGA interface (R98 28960, R98-28960) Barco R9828960; Twin Interface, Universal VGA interface; Very high bandwidth of 300 MHz (at -3dB); Compatibility from VGA (640 x 480) up to QXGA resolution (2,048 x 1,532); Auto-ranging Power Supply (87 to 240 V AC, 50/60Hz); Description Universal VGA interface
Barcos TWIN INTERFACE is an easy-to-use very high RGB bandwidth interface to connect any desktop or portable computer (including IBM-compatible and Apple computers) to a presentation device such as a projector or a professional data monitor. | | Wide compatibility
The TWIN INTERFACE makes it capable of handling all types of PC graphics standards ranging from VGA up to at least U-XGA resolution (1600 x 1200) coming from PC or Mac and connect them to a projector or professional monitor.
Very high bandwidth of 300 MHz (at -3dB)
Compatibility from VGA (640 x 480) up to QXGA resolution (2,048 x 1,532)
Auto-ranging Power Supply (87 to 240 V AC, 50/60Hz)
Easy-to-use intelligent interface
Most of the adjustments of the interface are aligned automatically or selected very easily.
Automatic Sync Input and Output detection (LED indication for sync signal)
ID bit selector allowing emulation of a typical IBM or Mac monitor
Automatic termination to 75 Ohm of RGB signals from the computer and TTL/Sync signals with a 22K pull-up resistor
Easy to install
The accompanying mounting bracket facilitates installation in any enclosure, underneath tables and against walls. | Features - Rotary switch for ID Bit Termination for most common display modes. This ensures proper functioning of graphics card even when no monitor is connected.
- Slim and compact design
- No user settings required: fully automatic sync input and output
detection. Three LEDs indicate the detected sync signals (H, V, Csync). - Rugged full metal design with rubber protection ribs
- Easy mounting
Specifications | Input | RGB Analog on D15 connector
Signal levels:
R, G, B: 0.7 Vpp (no sync) or 1 Vpp
with sync @ 75 Ohm
Sync: TTL @ 22 K load | | Outputs | RGB Analog on 5 BNC connectors
(to projector or monitor):
R, G, B: 0.7 vpp (no sync) or 1 Vpp @
75 Ohm
H, V or Csync: 1.54 Vtt
RGB Analog loop through on
D15 connector (local monitor out):
R, G, B: 0.7 vpp (no sync) or 1 Vpp
with sync @ 75 Ohm
Gain fixed to 1
Two LEDs indicate signal presence
on the BNC sync outputs (H & V) | | RGB Bandwidth | 300 MHz@-3dB | | Compatibility | All desktop or portable computers with resolutions from VGA up to QXGA (2,048 x 1,532 pixels)
All Macintosh computers with D15 output (an adapter will be needed for older Macintosh computers with DB15 output). | | AC power | Auto ranging power supply
87-240 V AC 50/60Hz | | Dimensions | W x H x D: 218 x 45 x 160 mm
(8.58 x 1.77 x 6.30 in) | A-20050304-1193-116-L *This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.
|
