|
Belden 7810SB 0101000, Model 7810SB, RG8,
10 AWG, Ship Board, RF 400 Wireless Coax Cable; Black; CMG-LS and
CMR-Rated; 10 AWG solid 0.108-Inch Bare copper-covered aluminum
conductor; Gas-injected foam HDPE insulation; Duobond II Tape and Tinned
copper braid shield; LSZH jacket; UPC 612825189831; Suitable for Indoors
and Outdoors; Suitable for Wireless RF, ABS Type Approved, CMG-LS, IEEE
45 clause 23, IEC 60092-376 clause 17, 60092-351, 60754-1, 60754-2,
61034, UL1865 FT4 Loading, Limited Smoke, IEC 60332-3-22 Category A,
60332-1, IEEE 1202; Dimensions 1000-Foot Reel; Weight 88 Pounds
|
General Information
|
|
Manufacturer
|
Belden
|
|
Manufacturer Part Number
|
7810SB
0101000 |
|
Product Name
|
Model
7810SB, RG8, 10 AWG, Ship Board, RF 400 Wireless Coax Cable |
| UPC Code |
612825189831 |
|
Features
|
- Black
- CMG-LS and CMR-Rated
- 10 AWG solid 0.108-Inch Bare
copper-covered aluminum conductor
- Gas-injected foam HDPE
insulation
- Duobond II Tape and Tinned
copper braid shield
- LSZH jacket
- Suitable for Indoors and
Outdoors
- Suitable for Wireless RF, ABS
Type Approved, CMG-LS, IEEE 45 clause 23, IEC 60092-376 clause
17, 60092-351, 60754-1, 60754-2, 61034, UL1865 FT4 Loading,
Limited Smoke, IEC 60332-3-22 Category A, 60332-1, IEEE 1202
|
|
Specifications
|
Conductors
|
AWG: 10
Stranding: Solid
Material: BCCA - Bare Copper Covered Aluminum
Conductor Count: 1
|
| Insulation
and Shielding |
Insulation
Material: Gas-injected FHDPE - Foam High Density Polyethylene
Outer Shield Material: Aluminum/Polyester/Aluminum Tape and TC -
Tinned Copper Braid
Outer Jacket Material: LSZH - Low Smoke Zero Halogen
|
Electrical
Characteristics
|
Nominal
Conductor DCR: 1.34 Ohm/1000ft
Nominal Conductor DCR Conductor Resistance: 1.34 Ohm/1000ft
Nominal Outer Shield DCR: 2 Ohm/1000ft
Outer Conductor DCR: 2 Ohm/1000ft
Nominal Capacitance Conductor to Shield: 23 pF/ft
Nominal Inductance: 0.06 uH/ft
Nominal Characteristic Impedance: 50 Ohm
Nominal Insertion Loss 30 MHz: 0.7 dB/100ft
Nominal Insertion Loss 6000 MHz: 11.4 dB/100ft
Nominal Delay: 1.17 ns/ft
Nominal Velocity of Propagation: 86 Percent
Maximum Insertion Loss 30 MHz: 0.7 dB/100ft
Maximum Insertion Loss 6000 MHz: 12.23 dB/100ft
Maximum Power Rating 30 MHz: 3427 W
Maximum Power Rating 30 MHz 6000 MHz: 213 W
Maximum VSWR 5-6000 MHz: 1.25:1
Maximum Recommended Current: 2.8 Amps per conductor at 77 Degrees
F
UL Voltage Rating: 300 V RMS in compliance with UL AWM Style 2464
|
| Temperature Range |
Non-UL
Temp Rating: 176 Degrees F
UL Temp Rating: 167 Degrees F in compliance with UL AWM Style 2464
Operating Temp Range: -22 Degrees F To 167 Degrees F |
| Mechanical Characteristics |
UV
Resistance: Yes
Bulk Cable Weight: 88 Pounds/1000ft
Max Recommended Pulling Tension: 88 Pounds
Min Bend Radius/Minor Axis: 4 Inches
|
| Standards |
NEC/
UL Specification: CMG-LS, CMR
CEC/C UL Specification: CMG-LS, CMR
CPR Euroclass: Eca
IEEE Specification: Standard 45 clause 23
RG Type: 8/U Type
Other Specification: UL444, ABS Type Approval Certificate
06-HS184641B |
Applicable
Environmental and Other Programs
|
EU
Directive 2000/53/EC ELV: Yes
EU Directive 2003/96/EC BFR: Yes
EU Directive 2011/65/EU ROHS II: Yes
EU Directive 2012/19/EU WEEE: Yes
EU Directive 2015/863/EU: Yes
EU Directive Compliance: EU Directive 2003/11/EC BFR
EU CE Mark: Yes
EU RoHS Compliance Date: 2006-08-07
CA Prop 65 CJ for Wire and Cable: Yes
MII Order 39 China RoHS: Yes
|
Suitability
|
Suitability
- Aerial: Yes
Suitability - Indoor: Yes
Suitability - Outdoor: Yes
Plenum Rated: No
Riser Rated: Yes |
Flammability,
LS0H, Toxicity Testing
|
UL
Flammability: UL1666 Vertical Shaft, UL1685 FT4 Loading, Limited
Smoke
CSA Flammability: FT4
ISO/IEC Flammability: 60332-1, 60332-3-22 (Category A)
IEEE Flammability: 1202 |
Dimensions
|
1000-Foot Reel
|
Weight
|
88 Pounds
|
A-20191109-1505-212-L
M-20191210-1505-253-L
*This item is BRAND
NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|
