Black Box
JPM2194A Distribution Panel for Cisco High-Density Analog and Digital Extension
Module for Voice and Fax,
Three-part design includes BASE, EM0, and EM1
connectors, Connectors (8) RJ-11 BASE, numbered 0–7, (8) RJ-11 analog EM0,
numbered 8–15, (8) RJ-11 analog EM1, numbered 16–23, (4) RJ-45 digital EM0,
numbered 8–11, (4) RJ-45 digital EM1, numbered 16–19, (1) RJ-21 male on the back
of the panel
General Information |
Manufacturer |
Black Box
|
Manufacturer Part Number |
JPM2194A |
Product Line |
Analog and Digital Extension Module for Voice and
Fax |
Product Name |
JPM2194A Distribution Panel for Cisco High-Density Analog and
Digital Extension Module for Voice and Fax, 3.5“H-2U x 19“W x 1“D (8.9 x
48.3 x 2.5 cm)
Size, 2.8 lb.-1.3 kg Weight |
Marketing Information |
If you have a Cisco router with an 8-port
voice/digital expansion module (EVM-HD) installed, consider this easy, low-cost
way to connect your end analog and digital Internet phone users. The
Distribution Panel for Cisco High-Density Analog and Digital Extension
Module for Voice and Fax (JPM2194A) breaks out the expansion module’s 50-pin
telco connector into analog and digital RJ-11 and RJ-45 connectors. This
simplifies how you can link end users to the Cisco module.
The panel consists of eight RJ-11 connectors (labeled BASE) for connection
to analog phones. It also has 16 RJ-11 and 8 RJ-45 connectors on the panel’s
center and right sides (labeled EM0 and EM1) for connection to digital
phones, faxes, and modems. The center and right-side connectors have a
sliding plate that enables you to choose either the top (RJ-11) or bottom (RJ-45)
row of connectors for use. Select the connectors you will use by sliding the
connector cover over the unused ports. (NOTE: Do not plug cables into the
center top [RJ-11] and bottom [RJ-45] or the right-side top [RJ-11] and
bottom [RJ-45] connectors at the same time. The sliding panel prevents this
from happening.)
Four combinations of connectors are available, depending on which connectors
are covered with the sliding plate. Link up to eight analog phones via RJ-11
cable (EL06M-MM) to the connectors labeled BASE on the panel’s left side,
and attach 8, 12, or 16 digital Internet phones, fax machines, or modems via
RJ-11 (EL06M-MM) or RJ-45 cable (EVNSL51) to the connectors labeled EM0 or
EM1 on the panel’s right side. |
Features & Benefits |
- Three-part design includes BASE, EM0, and EM1
connectors.
- Helps enable packet voice technologies such as Voice
over IP (VoIP) by distributing digital and analog signals from legacy
analog phone systems and/or Internet phones.
- Use ELN29T-MF Telco cable to attach the telco connector
on the back of the panel to the telco connector on the Cisco EVM-HD module
that’s installed in your router.
|
Specifications |
|
A-20060202-1372-130-E
M-20070621-1372-117-E
*This item is BRAND NEW - not refurbished. It comes
with all manufacturer supplied accessories, and full manufacturer's USA warranty.
|