Brightness
|
6000 ANSI lumens (+/- 10%)
|
90% brightness uniformity across
the screen |
Contrast Ratio (1.5-2.2:1 zoom
lens) |
300:1 ANSI; 800:1 On/Off
|
Resolution/Digital Processing |
3-chip 0.9" DMD™ (Digital
Micromirror Device) system
|
True SXGA 1280x1024 chip
resolution
|
13 bit user selectable gamma table
|
More than 1 billion displayable
colors
|
Dynamic Scaling |
Resizing capabilities to scale
down from 1600 x 1200 and up from 640 x 480 to the SXGA resolution of DMD™
|
Independent horizontal and
vertical scaling adjustment for graphics and video inputs
|
Horizontal Frequency
|
15 to 120 kHz
|
Vertical Frequency
|
24 to 120 Hz
|
Field Interchangeable Optional
Lenses
|
Fixed short throw lens 1.2:1
|
Zoom lenses: 1.5-2.2:1, 2.2-4:1
and 4-7:1
|
Up to 130% of vertical lens offset
for off-axis projection (using a 2.5-4:1 lens)
|
Up to 80% of horizontal lens
offset (using a 2.5-4:1 lens)
|
Compatibility with VistaGRAPHX
lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter required)
|
Screen size 1.5m - 12.2m (6ft -
40ft) diagonal
|
Lens Mount
|
Motorized horizontal and vertical
lens offset, focus and zoom adjustments
|
Lens "bayonet-style" insertion
system
|
Lens mount tilt adjustment
|
Built-in light shutter
|
Inputs
|
Built-in RGB/YUV/YPbPr inputs
allowing separate H and V syncs, tri-level sync, composite sync and sync-on-green/luma
(5 BNC connectors)
|
Multi-standard (NTSC, NTSC44, PAL,
PALM, PALN, SECAM) video decoder module provides 1 composite video input w/ loop
through via BNC&RNA connectors, 1 S-video input w/ loop through via 4-pin DIN&BNC
connectors
|
Slot for an optional input module
|
Full compatibility with Marquee
Signal Switcher and third-party switchers
|
HDTV/DTV Compatibility
|
Full HDTV/DTV compatibility on
analog RGB/YPbPr inputs
|
Accepts 480i, 480p, 576i, 576p,
720p, 1035i, and 1080i formats at all applicable frame/field rates
|
Accepts 1080p at 24, 25 and 30 Hz
frame rates
|
Optional HDTV Serial Digital Input
Module
|
Various Keypads |
Standard hand-held IR backlit
remote keypad, front and rear infrared sensors
|
Built-in backlit keypad
|
Optional RS422 two-way remote
controller with LCD display using 6 pin XLR connector with range of 3000 ft
|
Optional wired backlit remote
keypad with 3 pin XLR connector
|
Control/Networking
|
Third party control system and
switcher compatibility
|
Dual RS232 ports for computer
control, with loop through for connection of multiple projectors
|
Dual 6 pin XLR RS422 ports for
connection of optional LCD two-way controllers and loop-through to multiple
projectors up to 600 ft (183 m)
|
Diagnostics
|
Built-in LCD diagnostic display
indicates operational status and error messages
|
Power and Status LED
|
Full diagnostics through RS232 9
pin D connector
|
Graphical User Interface |
Auto Set-up feature
|
"Direct Access" intuitive user
interface for complete projector control in 5 world languages
|
On screen user movable menus to
fit different image aspect ratios (4:3, 5:4, 16:9, etc.)
|
On screen help menus
|
100 channel memories
|
Auto power feature
|
Lamp Specification/Color
Temperature |
1200W CERMAX Xenon® illumination
system
|
Pre-aligned lamp module
|
Constant color temperature over
the lamp life
|
Color temperature range 3200K to
9300K
|
User replaceable lamp within 5
minutes
|
Typical lifetime: 1000 hours
|
Variable Lamp Power Supply/Light
Output Control (LiteLOC) |
"Auto Brightness" mode to maintain
constant brightness over time
|
"Lamp Conserve" mode to extend the
lamp life
|
"Max Brightness" mode for maximum
light output
|
Power Requirements
|
Line voltage 220 VAC to 240 VAC
+/- 10% @ 50/60 Hz
|
Power consumption: 1700 W maximum
|
Thermal dissipation: 5150 BTU/hr
|
Operating current: 8.5A maximum
|
Weight and Size
|
92 lbs. (41.8kg)
|
56.6 cm W x 76.5 cm L x 30.2 cm H
excluding handles
|
22.28" W x 30.1" L x 11.88" H
excluding handles |
Standard Accessories
|
IR remote keypad with batteries
|
User's Manual |
2.44 m (8 ft) line cord
|
Optional Accessories |
Serial Digital input (SMPTE 259M/CCIR
601) with loop through feature
|
Digital HDTV input module (with
loop through feature) compatible with all known HDTV formats
|
DVI/DFP input module
|
10 bit ADP (Advanced Digital
Processing) module
|
Wired remote keypad
|
Compatible with all Marquee input
modules
|
RS422 Two-way remote LCD
controller
|
Replacement lamp kit
|
Remote infrared sensor
|
Service Manual
|
Librarian communication software
|
Transit Case
|
Regulatory Approvals |
CSA, UL and European safety
approvals
|
North American and European EMI/EMC
approvals |
Third Party Test Criteria |
ISTA, IEC 60068-2-64 , ASTM
D4169-96, MIL STD 810F (Shipping Vibration & Shock, while in Christie Digital
Systems Transit Case)
|