|
Features |
- 6,000 ANSI lumens maximum
- True XGA resolution
- Pixel clock 160 MHz
- LiteLOC™ facility
- HDTV and DTV compatible
- Modular architecture
- Intelligent Lens System (ILS™)
- Inexpensive upgrade path
- Compact design
- Advanced inverse telecine digital processing
- 6' to 40' diagonal image size
- Intuitive graphical user interface
|
|
Specifications |
|
Brightness
|
- 6,000 ANSI lumens (+/- 10%)
- 90% brightness uniformity across the screen
|
|
Contrast Ratio (1.5-2.2:1)
|
|
|
Resolution/Digital Processing
|
- 3 chip 0.9" DMD™ (Digital Micromirror Device) system
- True XGA 1024x768 chip resolution
- 13 bit user selectable gamma table
- More than 1 billion displayable colors
|
|
Dynamic Scaling
|
- Resizing capabilities to scale down from 1600 x 1200 and up from 640 x 480 to the SXGA resolution of DMD™
- Independent horizontal and vertical scaling adjustment for graphics and video inputs
|
|
Horizontal Frequency
|
|
|
Vertical Frequency
|
|
|
Field Interchangeable Optional Lenses
|
- Fixed short throw lens 1.2:1
- Zoom lenses: 1.5-2.2:1, 2.2-4:1 and 4-7:1
- Up to 130% of vertical lens offset for off-axis projection (using a 2.5-4:1 lens)
- Up to 80% of horizontal lens offset (using a 2.5-4:1 lens)
- Compatibility with VistaGRAPHX lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter required)
- Screen size 1.5m - 12.2m (6ft - 40ft) diagonal
|
|
Lens Mount
|
- Motorized horizontal and vertical lens offset, focus and zoom adjustments
- Lens "bayonet-style" insertion system
- Lens mount tilt adjustment
- Built-in light shutter
|
|
Inputs
|
- Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, tri-level sync, composite sync and sync-on-green/luma (5 BNC connectors)
- Multi-standard (NTSC, NTSC44, PAL, PALM, PALN, SECAM) video decoder module provides 1 composite video input w/ loop through via BNC&RNA connectors, 1 S-video input w/ loop through via 4-pin DIN&BNC connectors
- Slot for an optional input module
- Full compatibility with Marquee Signal Switcher and third-party switchers
|
|
HDTV/DTV Compatibility
|
- Full HDTV/DTV compatibility on analog RGB/YPbPr inputs
- Accepts 480i, 480p, 576i, 576p, 720p, 1035i, and 1080i formats at all applicable frame/field rates
- Accepts 1080p at 24, 25 and 30 Hz frame rates
- Optional HDTV Serial Digital Input Module
|
|
Various Keypads
|
- Standard hand-held IR backlit remote keypad, front and rear infrared sensors
- Built-in backlit keypad
- Optional RS422 two-way remote controller with LCD display using 6 pin XLR connector with range of 3000 ft
- Optional wired backlit remote keypad with 3 pin XLR connector
|
|
Control/Networking
|
- Third party control system and switcher compatibility
- Dual RS232 ports for computer control, with loop through for connection of multiple projectors
- Dual 6 pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 600 ft (183 m)
|
|
Diagnostics
|
- Built-in LCD diagnostic display indicates operational status and error messages
- Power and Status LED
- Full diagnostics through RS232 9 pin D connector
|
|
Graphical User Interface
|
- Auto Set-up feature
- "Direct Access" intuitive user interface for complete projector control in 5 world languages
- On screen user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9, etc.)
- On screen help menus
- 100 channel memories
- Auto power feature
|
|
Lamp Specification/Color Temperature
|
- 1200W CERMAX Xenon® illumination system
- Pre-aligned lamp module
- Constant color temperature over the lamp life
- Color temperature range 3200K to 9300K
- User replaceable lamp within 5 minutes
- Typical lifetime: 1000 hours
|
|
Variable Lamp Power Supply/Light Output Control (LiteLOC)
|
- "Auto Brightness" mode to maintain constant brightness over time
- "Lamp Conserve" mode to extend the lamp life
- "Max Brightness" mode for maximum light output
|
|
Power Requirements
|
- Line voltage 220 VAC to 240 VAC +/- 10% @ 50/60 Hz
- Power consumption: 1700 W maximum
- Thermal dissipation: 5150 BTU/hr
- Operating current: 8.5A maximum
|
|
Weight and Size
|
- 92 lbs. (41.8kg)
- 56.6 cm (W) x 76.5 cm (L) x 30.2 cm (H) excluding handles
- 22.28" (W) x 30.1" (L) x 11.88" (H) excluding handles
|
|
Optional Accessories
|
- Serial Digital input (SMPTE 259M/CCIR 601) with loop through feature
- Digital HDTV input module (with loop through feature) compatible with all known HDTV formats
- DVI/DFP input module
- 10 bit ADP (Advanced Digital Processing) module
- Wired remote keypad
- Compatible with all Marquee input modules
- RS422 Two-way remote LCD controller
- Replacement lamp kit
- Remote infrared sensor
- Service Manual
- Librarian communication software
- Transit Case
|
|
Regulatory Approvals
|
- CSA, UL and European safety approvals
- North American and European EMI/EMC approvals
|
