Cisco HWIC-2A/S= Two-Port
Asynchronous/Synchronous WAN Interface Card, Aysnchronous support with a maximum
speed of 115.2 Kbps and a minimum of 600 bps, Synchronous support with a maximum
speed of 128 Kbps.
General Information |
Manufacturer |
Cisco |
Manufacturer Part Number |
HWIC-2A/S= |
Product Name |
Two-Port Asynchronous/Synchronous WAN
Interface Card |
Marketing Information |
The dual-serial port WAN Interface Card
(WIC-2A/S) provides higher levels of serial port density for a single
WIC and is supported on the Cisco 1700, 2600, and 3600 series. The low
serial speed WIC-2A/S supports up to 128 Kbps synchronous or 115.2 Kbps
asynchronous serial links. Each port on a WIC is a different physical
interface and can support different protocols such as Point-to-Point
Protocol (PPP) or Frame Relay and Data Terminal Equipment/Data
Communications Equipment (DTE/DCE). This WIC supports mixed asynchronous
and synchronous operation on a single card as well.
These dual-serial port WICs feature Cisco's new, compact, Smart Serial
connectors to support a wide variety of electrical interfaces when used
with the appropriate transition cable. This includes: V.35, RS-232,
RS-449, RS-530, RS-530A in male and female versions for both DTE and DCE
devices. This feature provides easy configuration and reconfiguration as
network requirements change, without the need of purchasing a different
serial interface card.
Two cables are required to support the two ports on the WIC. |
Features |
- Aysnchronous support with a
maximum speed of 115.2 Kbps and a minimum of 600 bps. If you need to
run at speeds lower than 600 bps, use the AUX port instead.
- Synchronous support with a maximum
speed of 128 Kbps.
|
A-20090529-1243-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|