Cisco WS-X6724-SFP= Catalyst 6500 Series 24
port High Performance Mixed Media Gigabit Ethernet Interface Module, Small
Form-factor Pluggable (SFP), 24-port, 1000BASE-SX, LX/LH, -ZX, -T,
1000BASE-CWDM, LC connecter, Up to 9216 bytes/frame, CEF720 Interface Module
Class, Tx-1p3q8T Transmit Queues per Port, Rx-1q8T (2q8T when using dCEF)
Receive Queues per Port, DWRR Scheduler, Supervisor Engine 720, 720 Gbps using
CEF, Up to 30 Mpps per system, Using dCEF upgrade: up to 48 Mpps sustained per
slot for modules equipped with DFC3 to support distributed forwarding,
Centralized CEF engine located on supervisor's PFCx makes forwarding decision
General Information |
Manufacturer |
Cisco |
Manufacturer Part Number |
WS-X6724-SFP= |
Product Name |
Catalyst 6500 Series 24 port High Performance
Mixed Media Gigabit Ethernet Interface Module |
UPC Code |
0746320802084 |
Marketing Information |
TDesigned to complement the many roles
that the Cisco Catalyst 6500 Series plays in a network, Cisco Catalyst
6500 Series mixed media Gigabit Ethernet modules offer the broadest
selection of media, densities, performance, interoperability, and
chassis deployments for enterprises and service providers. These modules
are ideal for gigabit Ethernet over fiber to the desktop, gigabit
uplinks, aggregation of high-density 10/100 interfaces, Metro Ethernet,
backbone and high-speed server farm or data center connections as well
as mixed media environments supporting both fiber and copper cable
connections.
Cisco Catalyst 6500 series mixed media/fiber-based gigabit Ethernet
interface modules are used in distribution and core layers, data-center
and Metro Ethernet applications. These gigabit Ethernet interface
modules deliver wire-speed switched connectivity and support several
switch fabric connections and traffic forwarding options, these include:
Classic, CEF256, dCEF256 and CEF720. With a range of port densities and
modular physical layer interfaces, these modules also offer a choice of
packet buffer depths for traffic shaping, and QoS granularity with
varying number of queues and drop threshold options.
Flexible configurations for any deployment: Range of port densities,
media choices, and performance speeds for any deployment requirement
Choice of media and connector type: Support multi-mode fiber or
single-mode fiber using GBIC or SFP modules or MT-RJ fixed optics
High mixed media Gigabit Ethernet port densities: From 8 up to 48 ports
per module, and up to 410 mixed media/fiber Gigabit Ethernet ports per
system
Scalable and predictable system performance: Provide a selection of
switch fabric connections and throughput options: 32 Gbps, 256 Gbps and
720 Gbps bandwidth with system throughput of: 15 Mpps, 30 Mpps, 210 Mpps
and up to 400 Mpps
Operational consistency: Configurations available for Catalyst 6500 3-,
6-, 9-, and 13-slot chassis running Cisco IOSŪ Software and Cisco
Catalyst Operating System Software; interoperable with all other
interfaces and services modules; and forward-compatible with all
Catalyst 6500 supervisor engines
Maximum network uptime and resiliency: Support Cisco enhanced
Per-Virtual LAN (VLAN) Spanning Tree Plus (PVST+) protocol, IEEE 802.1w
Rapid Spanning Tree Protocol (RSTP) and IEEE 802.1s Multiple Spanning
Tree (MST) protocol, Per-VLAN Rapid Spanning Tree (PVRST) protocol, Hot
Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol
(VRRP), Gateway Load Balancing Protocol (GLBP), Cisco EtherChannelŪ, and
IEEE 802.3ad link aggregation for fault-tolerant connectivity
Superior traffic management: Available with large per-interface buffers
and multiple-priority queues for traffic prioritization and policing,
allowing for tight service-level agreement (SLA) enforcement
Extensive management tools: Support CiscoWorks network management
platform, Simple Network Management Protocol (SNMP) versions 1, 2, and 3
and four RMON groups (statistics, history, alarms, and events)
The Catalyst 6500 can aggregate up to
eight physical Fast Ethernet, Gigabit Ethernet or 10Gigabit Ethernet
links into a single virtual link using Cisco's Port Aggregation Protocol
(PAgP) or IEEE 802.3ad technology. This provides network managers a
reliable high-speed solution for the campus network backbone.
The Cisco Catalyst 6500 Series also
supports multimodule channeling technology, providing even greater
resiliency by creating channels across ports on separate modules in the
same chassis. As a result, connectivity is maintained even if one module
(and corresponding ports) fails. This is ideal for deployments requiring
scalable, flexible bandwidth within the network. An additional benefit
of Cisco EtherChannel capabilities include automatic recovery and
redistribution of loads across remaining links; easing management; and
making the technology transparent to network applications. The same
Cisco EtherChannel technology can be used across Cisco Systems
industry-leading 10-Gigabit Ethernet modules, providing increased
aggregation as well as resiliency against link failure. |
Features |
- Small Form-factor Pluggable (SFP)
- 24-port, 1000BASE-SX, LX/LH, -ZX,
-T, 1000BASE-CWDM, LC connecter
- Up to 9216 bytes/frame
- CEF720 Interface Module Class
- Tx-1p3q8T Transmit Queues per Port
- Rx-1q8T (2q8T when using dCEF)
Receive Queues per Port
- DWRR Scheduler
- Supervisor Engine 720
- 720 Gbps using CEF; Up to 30 Mpps
per system
- Using dCEF upgrade: up to 48 Mpps
sustained per slot for modules equipped with DFC3 to support
distributed forwarding
- Centralized CEF engine located on
supervisor's PFCx makes forwarding decision
- Upgradeable to dCEF switching with
optional WS-F6700-DFC3
- Use WS-F6700-DFC3 with Supervisor
Engine 720 (Optional)
- Dual 20 Gbps (40 Gbps total)
channel connection to switch fabric on Supervisor Engine 720
- 6503 not supported at current time
|
A-20090708-1071-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|