|
Crown XTi 6000 XTi Series Stereo Power
Amplifier, 2 ohm Stereo (per channel) 3000W, 4 ohm Stereo (per channel) 2100W, 8
ohm Stereo (per channel) 1200W, 4 ohm Bridge-Mono 6000W, 8 ohm Bridge-Mono
4200W, Integrated speaker presets with LCD front panel display, Switch-mode
universal power supply, UPC 871015003214, Accurate, uncolored sound with very
low distortion for the best in music and voice reproduction, Advanced protection
circuitry guards against: shorted outputs, open circuits, DC, mismatched loads,
general overheating, high-frequency overloads and internal faults, Extremely
versatile, handling a wide range of speaker impedances and outputs, Speaker
presets for crossover frequencies, EQ, limiting and delay
|
General Information |
|
Manufacturer |
Crown |
|
Manufacturer Part Number |
XTi 6000 |
|
Product Name |
XTi Series Stereo Power Amplifier |
|
UPC Code |
871015003214 |
|
Marketing Information |
Crown’s XTi family of amplifiers defines
the standard for portable PA systems with unmatched performance,
technology and power-to-the-people affordability that delivers the goods
night after night without even breaking a sweat. There’s no debate —
when you choose Crown’s XTi Series, you’re choosing one of the most
powerful and efficient amplifiers on the market today.
How do we do it? With innovations designed to simplify your life and
rock their world. Innovations like integrated DSP that allows you to
quickly and easily configure crossovers, EQ, limiting and delay, along
with tools like a pink noise generator, subharmonic synthesizer, and
universal tracking switch-mode power supply, which reduces power draw
and waste heat. And as the first Crown amps to use Icepak™ thermal
modeling software, they are at the top of their class when it comes to
thermal efficiency and lightweight portability.
The XTi Series demands respect without making demands on you. With this
kind of freedom and reliability, the XTi family is one you’ll always
want to be a part of. XTi. The power to move you — and the world |
|
Features |
- 2 ohm Stereo (per channel) 3,000W
- 4 ohm Stereo (per channel) 2,100W
- 8 ohm Stereo (per channel) 1,200W
- 4 ohm Bridge-Mono 6,000W
- 8 ohm Bridge-Mono 4,200W
- Integrated speaker presets with
LCD front panel display
- Accurate, uncolored sound with
very low distortion for the best in music and voice reproduction
- Advanced protection circuitry
guards against: shorted outputs, open circuits, DC, mismatched
loads, general overheating, high-frequency overloads and internal
faults
- Extremely versatile, handling a
wide range of speaker impedances and outputs
- Switch-mode universal power supply
- Speaker presets for crossover
frequencies, EQ, limiting, and delay
- 2U rack spaces and weigh under 24
lb; weight sets a new standard in lightweight amps
- Speakon® and binding post outputs,
XLR inputs and loop-thrus
- Comprehensive LED status per
channel
|
|
Specifications |
|
Sensitivity (volts RMS) for full rated
power at 4 ohms |
1.4V |
|
Frequency Response (at 1 watt into 4 ohms,
20Hz - 20 kHz) |
+0/–1 dB |
|
Signal to Noise Ratio (below rated 1 kHz
power at 8 ohms), A-weighted |
103 dB |
|
Damping Factor (8 ohm): 20 Hz to 400 Hz
|
> 500 |
|
Input Stage |
Input is electronically balanced and
employs precision 1% resistors. |
AC Line Current
(120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)
|
15.3A; at idle draws no more than 180
watts. |
|
Crosstalk (below rated power) 20 Hz to 1
kHz |
> 70 dB |
|
Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced |
|
Load impedance (note: safe with all types
of loads) |
Stereo 2-8 ohms
Bridge mono 4-16 ohms |
|
Voltage Gain (at 1 kHz, 8 ohm rated
output) |
37.1 dB. |
|
Maximum Input Signal |
+22 dBu typical |
|
Operating Temperature |
0° C to 40° C at 95% relative humidity
(non-condensing) |
|
AC Line Voltage and Frequency
Configurations Available (± 10%) |
100V, 120V, 220-240V 50/60 Hz |
|
Ventilation |
Flow-through ventilation from front to
back |
|
Cooling |
Heat sinks and proportional-speed fan |
|
Dimensions: Width, Height, Depth (behind
mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B) x 3.5
in. (8.9 cm) H x 16.2 in. (41.15 cm) D |
|
Net Weight, Shipping Weight |
24.0 lb (10.9 kg), 30.0 lb (13.6 kg) |
A-20120305-1250-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
