|
DBX 1261M ZonePRO 12x6 Digital Zone Processor,
12 Inputs/6 Outputs, 6 Balanced Mic/Line Inputs, 4 Unbalanced, Mono-Summed RCA
Input Pairs, S/PDIF Input, Microphone Gain per Channel, Pre-Configured
Architecture, Two Configurable Input Insert Positions, One Configurable Output
Insert Position, AutoWarmth per Output Zone, Link Bus, Ethernet Control, Serial Control, Third Party Control,
Wizard-Driven Configuration, Optional ZC Controllers
|
General Information |
|
Manufacturer |
DBX |
|
Manufacturer Part Number |
1261M |
|
Product Name |
ZonePRO® 12x6 Digital Zone Processor |
|
Overview |
The ZonePRO 1261m offers fixed I/O,
pre-configured architecture, configurable insert processing and optional
duplication of audio channels to another ZonePRO device via a link bus.
The 1261m features a total of 12 inputs and six outputs. Inputs include
six balanced mic/line switchable terminal block inputs, four mono-summed
pairs of unbalanced RCA inputs and one S/PDIF input for up to two
digital channels. Hardware-controlled
microphone gain allows adjustment of microphone gain per channel.
The 1261m device has a pre-configured architecture with input
processing, a central matrix and output processing. Two input insert
positions and one output insert position allow channel-specific insert
processing to be configured. AutoWarmth®, a psychoacoustic function that
maintains full frequency bandwidth even when the signal level has
dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another
ZonePRO device in applications where additional output zones are
required.
The front panel of the 1261m features a power status LED, a network
traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone
Controllers. This collection of hardware wall-controllers represents a
series of simple, elegant user interfaces for functions such as volume,
source and preset control.
All ZonePRO devices can be controlled by third party control systems via
RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for
the ZonePRO family of devices—offers control of the ZonePRO 1261m via
Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer
guides users through the step-bystep configuration process of the 1261m. |
|
Features |
- 12 Inputs / 6 Outputs
- 6 Balanced Mic/Line Inputs
- 4 Unbalanced, Mono-Summed RCA
Input Pairs
- S/PDIF Input
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert
Positions
- One Configurable Output Insert
Position
- AutoWarmth® per Output Zone
- Link Bus
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
|
|
Specifications |
|
Front Panel LED Indicators |
|
Per Output |
6 Independent Six-Segment Lightpipe Output
Meters that range from -30 to +20 dBu, Threshold Meters |
|
Other |
LCD Display provides information about
Source Selection, Page Steering, Zone Volume and Mute |
|
Analog Inputs |
|
Type |
Euroblock (Mic/Line), RCA (Source) |
|
Impedance (Euroblock) |
>50kΩ Balanced, >25kΩ Unbalanced, RF
Filtered |
|
Impedance (RCA) |
>25kΩ Unbalanced, RF Filtered |
|
Max. Input Line Level |
+20dBu Mic/Line, +12dBu RCA |
|
CMRR |
> 40dB, typically >55db @ 1kHz |
|
Mic Pre Gain |
30 to 60dB |
|
Mic Input Noise (E.I.N.) |
< -118dBu, 22Hz-22kHz, 150Ω Source
Impedance |
|
Mic Phantom Power |
15V |
|
Analog Outputs |
|
Number of Outputs |
6 Total |
|
Type |
Electronically Balanced, RF Filtered
Euroblock |
|
Impedance |
120Ω Balanced, 60Ω Unbalanced |
|
Max. Output Level |
+20dBu |
|
A/D Performance |
|
Type |
dbx Type IV™ Conversion System |
|
Dynamic Range line |
(line) >113dB, A-weighted, >110dB unweighted |
|
Type IV dynamic range |
>119dB, A-weighted, 22kHz
BW: >117dB, unweighted, 22kHz BW |
|
Sample Rate |
48kHz |
|
D/A Performance |
|
Dynamic Range |
112dB A-weighted, 109dB unweighted, 22kHz
BW |
|
System Performance |
|
Dynamic Range |
>110dB A-weighted, >107dB unweighted,
22kHz BW |
|
THD+N |
0.003% typical at +4dBu, 1kHz, 0dB gain |
|
Frequency Response |
20Hz – 20kHz, +/- 0.5dB |
|
Interchannel Crosstalk |
>80dB typical |
|
Crosstalk input to output |
>80dB |
|
Propagation Delay |
0.8 msec |
|
Power Requirements |
|
Operating Voltage |
100-240 VAC, 50/60Hz |
|
Power Consumption |
27 Watts |
|
BTU |
<92.13 |
|
Physical |
|
Dimensions |
1.75” (1U) x 19” x 7.75” (45mm x 483mm x
197mm) |
|
Weight |
6.2 lbs / 2.81 kg Shipping Weight 8.35 lbs
/ 3.78 kg |
A-20121004-1250-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
