|
Denon Professional Delta 10 Professional
10" Powered Loudspeakers (each); Unrivaled acoustic accuracy via
advanced engineering and design; 2400 watts peak Class D power (1200
Watts continuous); 10" LF transducer, 1.75" HF driver with 1” acoustic
aperture; Optimized 90 Degrees x 60 Degrees sound coverage field; UPC
694318017234; Works with free Denon Drive app for wireless sound-shaping
control; Wirelessly level-match, EQ, delay-compensation, and more;
DSP-controlled, custom crossover and active thermal protection; Built-in
mixer, (2) Mic/Line inputs, volume control, XLR output; Limit/Clip
indicator with red LED; EQ contour switch, Ground Lift switch;
Trapezoidal cabinet with custom-molded heavy-duty handle; Flyable via
(12) M10 rigging points; Dimensions 22" x 13" x 13.5"; Weight 45.7 lbs
|
General Information
|
|
Manufacturer
|
Denon
Professional
|
|
Manufacturer Part Number
|
Delta 10
|
|
Product Name
|
Professional
10" Powered Loudspeakers (each) |
| UPC Code |
694318017234
|
|
Overview
|
| The Delta 10 features an
integral low-distortion Class D amplifier capable of 2400 watts
peak output (1200 watts continuous). The ultra-durable, linear
transducers are paired with custom DSP-controlled crossovers and
computer-designed high-frequency waveguide for an optimized 90 x
60 Degrees coverage field. Highly flexible connection/control
facilities easily adapt the speaker to any usage condition. Plus,
the entire Delta series utilizes dynamic thermal protection to
ensure reliable, studio-grade sound reproduction at any volume
level |
|
Features
|
- Unrivaled acoustic accuracy
via advanced engineering and design
- 2400 watts peak Class D power
(1200 Watts continuous)
- 10” LF transducer, 1.75” HF
driver with 1” acoustic aperture
- Optimized 90 Degrees x 60
Degrees sound coverage field
- Works with free Denon Drive app
for wireless sound-shaping control
- Wirelessly level-match, EQ,
delay-compensation, and more
- DSP-controlled, custom crossover
and active thermal protection
- Built-in mixer, (2) Mic/Line
inputs, volume control, XLR output
- Limit/Clip indicator with red
LED
- EQ contour switch, Ground Lift
switch
- Trapezoidal cabinet with
custom-molded heavy-duty handle
- Flyable via (12) M10 rigging
points
|
|
Specifications
|
System
Configuration
|
System
Type: 10-inch two-way, self-powered, horn-loaded HF
|
Acoustic
Performance
|
Frequency
Range (-10 dB): 45–20kHz
Frequency Response (+/-3 dB): 51–20kHz
Maximum Peak SPL (Measured): 131dB at 1m
Coverage Pattern (Averaged): 90 Degrees H x 60 Degrees
V
Directivity Index (D.I.): 9.5dB |
Power
Amplification
|
Peak Power: 2400 watts (1600 watts LF+800
watts HF)
Continuous Power: 1200 watts (800 watts LF + 400watts HF)
Amplifier Topology: Class D/Switching, bridged LFand HF
Amplifier Cooling: Passive
|
Transducer
|
LF
Transducer: 10-inch (254mm) high excursioncone transducer 2.5-inch
(65mm) high-temperature voice coil, ferrite magnet
HF Transducer: 1.75-inch (45mm) voice coil, ferritemagnet
compression driver with1-inch (25mm) acoustic aperture
|
DSP
Functionality
|
System
Control: high-pass & low-pass crossoverfilters, transducer EQ
and delaycompensation Transducer excursion, thermal, and amplifier
clip protection
User Controls: Rear panel selection of 5 DSP EQmodes: Flat,
Contour, 80 Hz HP, EXT LF, User
|
Wireless
Control and Monitoring
|
Wireless
Type: Bluetooth 2.0 + EDR. Class 2 RF
Wireless Range (typical): 82 ft. (25m) clear line-of-sight
Simultaneous Devices Connectable: 1 to 3 Delta Series loudspeakers
Compatible Wireless Devices: iPhone 3GS and newer, iPad 2
andnewer, iPod touch (4th generation) and newer
iOS Version Requirements: iOS 6.1 and newer
Wireless Control Features: Level Control (-∞ to + 10dB),
Mute,Signal level metering (-70 to0dB) DSP mode (Flat, Contour,
80Hz HP, Ext. LF, User) Rear Panel control lockout, 3 Band EQ
(Low,Mid, High), Delay, Polarity, User high-pass filter,
Monitoring (Limit,Peak, Fault)
|
Connectors
and Controls
|
Input
Connectors: 2 x XLR/TRS combo connectors, balanced
Input Impedance: 10KOhm balanced, 20KOhm unbalanced
Input level Controls: 2 x rotary volume control
Acoustic Polarity: Positive voltage applied to XLR Pin 2 generates
positive pressure from LF driver
Line/Mic Level Selector: Push-button switch (applies to Input 1
only)
Output Connector: Male XLR
Output Mix Control: Switch to select output mix pre- or
post-volume control
Ground Switch: Push-button to lift input signalinput ground
connection
Bluetooth: Momentary contact to initiate Bluetooth pairing mode
DSP Mode Selection: Momentary contact to cyclethrough DSP EQ modes
DSP Modes Available: 5 total: Flat, Contour, 80tHz HP,EXT LF, User
DSP Wireless Control: Live Drive iOS app over Bluetooth
Grille Logo LED On/Off Control: Recessed push-button switch
Standby Mode On/Off Control: Recessed push-button switch
LED Indicators: Signal Present / Limit, Power/Standby
Line Input Level Control Range: -∞ to 0dB, +4dBu nominal, +10dBu
for max output
Mic Level Control Range: -∞ to +50dB
|
Enclosure
|
Construction:
15mm and 18mm premium plywood, internally-braced
Finish: High-durability, textured, catalyzed polyurethane, black
Mounting: 12 x M10 female threaded screwsockets
Handles: Ergonomic handle with aluminum cross-bar
Stand mount: 1 x 35mm female socket
Grille: 1.2mm-thick perforated steel, black powder-coat
|
Environmental
|
Operating
Temperature: 14 F to 104 F Degrees
|
Power supply
|
Power Supply Design: Fully regulated switching,with Power
Factor Correction
Input Voltage Nominal Range: 100–240 VAC, 50/60Hz
Input Voltage Operating Range: 90–264 VAC, 50/60Hz
Voltage Selection: Automatic (self-regulating)
Power Connector: Male IEC
Current Requirement: 6A per system at 120 VAC 3A per system at 240
VAC
AC Line Cord: 9.8 ft. (3m) IEC female toregional AC male, 18 AWGat
1/8 of output power
|
| Dimensions |
22" x 13" x 13.5"
|
Weight
|
45.7 lbs
|
A-20170426-1771-199-L
*This item is BRAND
NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|
