|
Denon Professional Delta 12 Twelve-inch
2-Way 2400-watt Loudspeaker with Wireless Connectivity; Unrivaled
acoustic accuracy via advanced engineering and design; 2400 watts peak
Class D power (1200 Watts continuous); 12” LF transducer, 1.75” HF
driver with 1” acoustic aperture; Optimized 90 Degrees x 60 Degrees
sound coverage field; Works with free Denon Drive app for wireless
sound-shaping control; UPC 694318017258; Wirelessly level-match, EQ,
delay-compensation, and more; DSP-controlled, custom crossover and
active thermal protection; Built-in mixer, (2) Mic/Line inputs, volume
control, XLR output; Limit/Clip indicator with red LED; EQ contour
switch, Ground Lift switch; Trapezoidal cabinet with custom-molded
heavy-duty handle; Flyable via (12) M10 rigging points; Dimensions 24.1"
x 14.3" x 14.6"; Weight 52.2 lbs
|
General Information
|
|
Manufacturer
|
Denon
Professional
|
|
Manufacturer Part Number
|
Delta 12
|
|
Product Name
|
Twelve-inch
2-Way 2400-watt Loudspeaker with Wireless Connectivity |
| UPC Code |
694318017258
|
|
Overview
|
| The Delta 12 features an
integral low-distortion Class D amplifier capable of 2400 watts
peak output (1200 watts continuous). The ultra-durable, linear
transducers are paired with custom DSP-controlled crossovers and
computer-designed high-frequency waveguide for an optimized 90° x
60° coverage field. Highly flexible connection/control facilities
easily adapt the speaker to any usage condition. Plus, the entire
Delta series utilizes dynamic thermal protection to ensure
reliable, studio-grade sound reproduction at any volume level |
|
Features
|
- Unrivaled acoustic accuracy
via advanced engineering and design
- 2400 watts peak Class D power
(1200 Watts continuous)
- 12” LF transducer, 1.75” HF
driver with 1” acoustic aperture
- Optimized 90 Degrees x 60
Degrees sound coverage field
- Works with free Denon Drive app
for wireless sound-shaping control
- Wirelessly level-match, EQ,
delay-compensation, and more
- DSP-controlled, custom crossover
and active thermal protection
- Built-in mixer, (2) Mic/Line
inputs, volume control, XLR output
- Limit/Clip indicator with red
LED
- EQ contour switch, Ground Lift
switch
- Trapezoidal cabinet with
custom-molded heavy-duty handle
- Flyable via (12) M10 rigging
points
|
|
Specifications
|
System
Configuration
|
System
Type: 12-inch two-way, self-powered, horn-loaded HF
|
Acoustic
Performance
|
Frequency
Range (-10 dB): 43–20kHz
Frequency Response (+/-3 dB): 51–20kHz
Maximum Peak SPL (Measured): 133 dB at 1m
Coverage Pattern (Averaged): 90° H x 60° V
Directivity Index (D.I.): 9.5 dB |
Power
Amplification
|
Peak Power: 2400 watts (1600 watts LF +
800 watts HF)
Continuous Power: 1200 watts (800 watts LF + 400 watts HF)
Amplifier Topology: Class D/Switching, Bridged LF and HF
Amplifier Cooling: Passive
|
Transducer
|
LF
Transducer: 12-inch (305mm) cone transducer, 3-inch (76mm) voice
coil, ferrite magnet
HF Transducer: 1.75-inch (44mm) voice coil, ferrite magnet
compression driver with 1-inch (25mm) exit
|
DSP
Functionality
|
System
Control: high-pass and low-pass crossover filters,
transducer EQ and delay compensation Transducer excursion,
thermal, and amplifier clip protection
User Controls: Rear panel selection of 5 DSP EQ modes: Flat,
Contour, 80 Hz HP, EXT LF, User
|
Wireless
Control and Monitoring
|
Wireless
Type: Bluetooth 2.0 + EDR. Class 2 RF
Wireless Range (typical): 82 ft. (25m) clear line-of-sight
Simultaneous Devices Connectable: 1 to 3 Delta Series loudspeakers
Compatible Wireless Devices: iPhone 3GS and newer, iPad 2 and
newer, iPod touch (4th generation) and newer
iOS Version Requirements: iOS 6.1 and newer
Wireless Control Features: Level Control (-∞ to + 10dB), Mute,
Signal level metering -70 to 0dB) DSP mode (Flat, Contour, 80 Hz
HP, Ext. LF, User) Rear Panel control lockout, 3 Band EQ (Low,
Mid, High), Delay, Polarity, User high-pass filter, Monitoring
(Limit, Peak, Fault)
|
Connectors
and Controls
|
Input
Connectors: 2 x XLR/TRS combo connectors, balanced
Input Impedance: 10 KOhm balanced, 20 KOhm unbalanced
Input level Controls: 2 x rotary volume control
Acoustic Polarity: Positive voltage applied to XLR Pin 2 generates
positive pressure from LF driver
Line/Mic Level Selector: Push-button switch (applies to Input 1
only)
Output Connector: Male XLR
Output Mix Control: Switch to select output mix pre- or
post-volume control
Ground Switch: Push button to lift input signal input ground
connection
Bluetooth: Momentary contact to initiate Bluetooth pairing mode
DSP Mode Selection: Momentary contact to cycle through DSP EQ
modes
DSP Modes Available: 5 total: Flat, Contour, 80Hz HP, EXT LF, User
Grille Logo LED On/Off Control: Recessed push-button switch
Standby mode On/Off Control: Recessed push-button switch
LED Indicators: Signal Present / Limit, Power / Standby
Line Input Level Control Range: -∞ to 0dB, +4dBu nominal, +10dBu
for max output
Mic Level Control Range: -∞ to +50dB
|
Enclosure
|
Construction:
15mm and 18mm premium plywood, internally-braced
Finish: High-durability, textured, catalyzed polyurethane, black
Mounting: 12 x M10 female threaded screw sockets
Handles: 3 x ergonomic handles with aluminum cross-bar
Stand mount: 1 x 35mm female socket
Grille: 1.2mm-thick perforated steel, black powder-coat
|
Environmental
|
Operating
Temperature: 14 F to 104 F Degrees
|
Power supply
|
Power Supply Design: Fully regulated switching, with
Power Factor Correction
Input Voltage Nominal Range: 100–240 VAC, 50/60Hz
Input Voltage Operating Range: 90–264 VAC, 50/60Hz
Voltage Selection: Automatic (self-regulating)
Power Connector: Male IEC
Current Requirement: 6A per system at 120 VAC 3A per system at 240
VAC
AC Line Cord: 9.8 ft. (3m) IEC female to regional AC male, 18 AWG
|
| Dimensions |
24.1" x 14.3" x 14.6"
|
Weight
|
52.2 lbs
|
A-20170426-1771-199-L
*This item is BRAND
NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|
