Electro-Voice CPS-2T Power Amplifier w/70v/100v Operation, 2 Channel Power
Amplifier, Maximum bridged output 4 ohms: 1700 Watts, Maximum bridged output 8 ohms: 1200
Watts, No Network, < 0.05 %
Total harmonic distortion,
< 0.08 %
Intermodulation Distortion (SMTPE),
> 100 dB
Signal-to-noise ratio (A–weighted),
20 K-Ohms
Input Impedance (balanced), TSP (Transformer
Saturation Protection), dc, excessive hf, excessive back-EMF, inrush current
limiters, shorted loads, peak current limiters, Rear - Two calibrated level
controls, input routing (Dual/Parallel), chassis ground switch (Grounded/Ungrounded),
bridged mode switch (Bridged/Normal),Front Power Switch (On/Off)
General Information |
Manufacturer |
Manitowoc
|
Manufacturer Part Number |
CPS-2T
|
Product Line |
Power Amplifier |
Product Name |
Power Amplifier w/70v/100v Operation, 2 Channel Power Amplifier Rear
|
Marketing
Information |
The Electro-Voice CPS-2T amplifier is a very high-quality power amplifier designed to elicit excellent performance from any speaker system as well as 70.7V and 100V lines. Its low distortion and substantial headroom ensure that program material will be accurately amplified. Each channel of the CPS-2T delivers more than 330-watts continuous average power into 8 ohms and 600 watts into 4 ohms. In its transformer-isolated dual mode, it can deliver more than 580 watts into 70.7 or 100-volt lines. In the bridged mode at 1 kHz, the amplifier can deliver more than 1,200 watts into 8 ohms at less than 1% THD. Both direct and transformer-isolated outputs may be used simultaneously. The power supply with its large toroidal transformer gives the amplifier impressive headroom and current-output. |
Features |
- Maximum bridged output 4 ohms: 1700 Watts
- Maximum bridged output 8 ohms: 1200 Watts
- Network: No
- Total harmonic distortion: < 0.05 %
- Intermodulation Distortion (SMTPE): < 0.08 %
- Signal-to-noise ratio (A–weighted): > 100 dB
- Input Impedance (balanced): 20 K-Ohms
|
Specifications |
- Continuous Rated Output Power (45-20,000 Hz at less than 0.2% THD,
both channels driven per EIA RS-90)
- Dual Mode, 4 ohms: 500 watts
- Bridged Mode, 8 ohms: 1,000 watts
- Dual Mode, 8 ohms: 300 watts
- Transformer-Isolated Outputs, Dual Mode: 500 watts at 25V, 70V, or 100V
- Continuous Rated Output Power (1 kHz, 1% THD, both channels driven per EIA
RS-490)
- Dual Mode, 4 ohms: 600 watts
- Bridged Mode, 8 ohms: 1,200 watts
- Dual Mode, 8 ohms: 330 watts
- Transformer-Isolated Outputs, Dual Mode:
- 590 watts @ 100V
- 580 watts @ 70V
- 570 watts @ 25V
- Transformer-Isolated Outputs, Bridged Mode:
- 1,180 watts @ 200V
- 1,160 watts @ 140V
- 1,140 watts @ 50V
- Amplifier Protection: TSP (Transformer Saturation Protection); Audio
limiters: Over-temperature; dc, excessive hf, excessive back-EMF; inrush
current limiters; shorted loads; peak current limiters
- Load Protection: Start-up/shutdown transients; dc fault; infrasonic and
ultrasonic filters; Low ac line voltage; nonlinear signal limiters;
transformer saturation protection
- Cooling System: Front-to-rear airflow with two 3-speed fans
- Controls and Switches: Rear - Two calibrated level controls, input routing
(Dual/Parallel), chassis ground switch (Grounded/Ungrounded), bridged mode
switch (Bridged/Normal); Front: Power Switch (On/Off)
- Front-Panel Indicators: Two LED''s per channel (4 total) for signal
present -and limiter on, protect indicator and power on
- Connections :
- Input: 3-pin XLR-type connectors for each channel in parallel with a
removable 3-pin Phoenix Contact "Euro-style" terminal block connector for easy
signal routing
- Output: Phoenix Contact "Euro-style" terminal block connector #KGS-MSTB
2.5/12 for direct-coupled and transformer isolated outputs for AWG 12-24 wire
- Color: Gray
- Dimensions (H x W x D): 5.25" x 19.0" x 15.17"
|
A-20050420-1250-117-L
M-20070402-1250-117-E
*This item is BRAND NEW - not refurbished. It comes
with all manufacturer supplied accessories, and full manufacturer's USA warranty.
|