Extech MS6060 Digital Oscilloscope, 60MHz
2-Channel; 5.6" color LCD display, 23 automatic measurements; One-touch
automatic setup optimizes the position, range, timebase and triggering to assure
a stable display of virtually any waveform; Waveform Recorder to capture/replay
input waveforms from CH1 and CH2 with a maximum record length of 1000 frames;
UPC 793950396063, Built-in 6000 count True RMS MultiMeter with analog bargraph;
Easy-to-use pop-up menu with built-in multi-language system; 23 Automatic
Measurements; Waveform Math: Add, Subtract, Multiply, and Divide; Store and
recall up to 1000 waveform screens and setups using the installed 2G microSD
card; Automatic cursor tracking measurements; Pass-Fail function compares a
stored waveform to an unknown input; Average Mode for smoothing waveforms;
Built-in FFT function converts a time-domain signal into its frequency
components to measure harmonic content and distortion in systems; Square Wave
Output (2V, 1kHz) for probe adjustment; Complete with two 1X/10X oscilloscope
probes, test leads, 7.4V Li-Ion battery, universal AC charger, and carrying case
General Information |
Manufacturer |
Extech |
Manufacturer Part Number |
MS6060 |
Product Name |
Digital Oscilloscope, 60MHz 2-Channel |
UPC Code |
793950396063 |
Features |
- One-touch automatic setup
optimizes the position, range, timebase, and triggering to assure a
stable display of virtually any waveform
- Waveform Recorder to
capture/replay input waveforms from CH1 and CH2 with a maximum
record length of 1000 frames
- Built-in 6,000 count True RMS
MultiMeter with analog bargraph
- Easy-to-use pop-up menu with
built-in multi-language system
- 23 Automatic Measurements
- Waveform Math: Add, Subtract,
Multiply, and Divide
- Store and recall up to 1000
waveform screens and setups using the installed 2G microSD card
- Automatic cursor tracking
measurements
- Pass-Fail function compares a
stored waveform to an unknown input
- Average Mode for smoothing
waveforms
- Built-in FFT function converts a
time-domain signal into its frequency components to measure harmonic
content and distortion in systems
- Square Wave Output (2V, 1kHz) for
probe adjustment
- Complete with two 1X/10X
oscilloscope probes, test leads, 7.4V Li-Ion battery, universal AC
charger, and carrying case
|
Specifications |
Bandwidth |
60MHz |
Sample rate per channel |
500MS/s |
Risetime |
5.8ns |
Timebase Range |
4ns/div to 40s/div |
Oscilloscope Functions |
Record Length |
1M points per channel |
Display Size |
5.6" (142mm) color LCD; 640 x 480 pixels |
Channels |
2 |
Vertical Sensitivity |
2mV/div to 5V/div |
Vertical Resolution |
8 bits |
Glitch Capture |
Yes |
Sample Mode |
Normal, Average, Peak Detect |
Trigger Modes |
Edge, Pulse, Alt, Video, Slope |
Trigger Source |
CH1, CH2 |
Trigger Coupling |
AC, DC, LF, HF, Noise Reduction |
Input impedance |
1MΩ/20pF |
Max Input Voltage |
300V (peak) |
Cursor Measurement |
Voltage and time; Delta (CH1-CH2) |
True RMS MultiMeter Functions |
AC Voltage |
60mV, 600mV, 6V, 60V, 600V |
DC Voltage |
60mV, 600mV, 6V, 60V, 600V, 800V |
AC/DC Current |
60mA, 600mA, 10A |
Resistance |
600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ |
Capacitance |
5nF to 400μF |
Diode and Continuity |
Yes |
Power Supply |
3 hours Li-ion rechargeable battery; AC
Charger |
Dimensions |
9.6 x 6.4 x 2" (245 x 163 x 52mm) |
Weight |
2.6lbs (1.2kg) |
A-20121229-1454-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|