|
|
Freeplay AK-060-000-00-FO Freecharge 12V Passive Portable Power, Stainless steel shafts for extended life,
Large winder knob for easy grip, 3-phase winding, Skewed stator tooth faces to
reduce cogging torque while retaining high efficiency, 12V-nominal and 14.2V-max–regulated, Powers any device for which you have a cigarette-lighter adapter,
Lightweight and portable, Easy to crank.
General Information |
Manufacturer |
Freeplay
|
Manufacturer Part Number |
PK-060-000-00-FO |
Product Line |
Energy Source |
Product Name |
Freecharge 12V Passive Portable Power |
Marketing
Information |
The FreeCharge 12V
Personal Energy Source is a lightweight, durable and efficient power source
for mobile phones and other electronic devices. The self-charge system is
powered entirely by winding a hand crank, so is independent of all
conventional power supplies or batteries, enabling you to make and receive
calls, or charge other personal electronic devices, at any time.
The FreeCharge 12V consists of a generic base unit and interfaces to the
coupled device through a generic cigarette lighter socket. The charging
protocols are matched to each paired device by plugging in a cigarette
lighter charger specific to each device (not supplied). With a comfortable
and sustainable winding effort, the FreeCharge 12V will adapt its output to
match the requirements of the recipient device via the cigarette charger.
Regulated to deliver the same voltage output as an automobile while
cranking, the FreeCharge 12V provides a portable power supply for a wide
range of applications using up to 12V. The FreeCharge 12V is equipped with
an LED charge level indicator that illuminates when the crank handle is
turned at an optimum speed. Charge and talk times will vary between devices
and accessory chargers.
The FreeCharge 12V has no internal battery, allowing for the direct and
efficient transfer of energy directly into the recipient device. Internal
mechanical components are specified to industrial standards for repeated use
and long life. There are no degradable components – offering extended
storage life without any decay in performance – the generic cigarette
lighter interface providing both forward and reverse compatibility for
practically all mobile phones and personal electronic devices (iPod, GPS,
PDA etc.), from obsolete older models to those yet to be released. |
Features |
- Stainless steel shafts
for extended life.
- Large winder knob for
easy grip
- 3-phase winding.
- 12V-nominal and 14.2V-max
– regulated
- Skewed stator tooth
faces to reduce cogging torque while retaining high efficiency.
- Stator laminations 0.5mm
laminating steel to specification VM 350-50, double side insulated to
Stabolit 20
- Powers any device for which you have a cigarette-lighter adapter
- Lightweight and portable
- Easy to crank
- Can be stored indefinitely
|
Specifications |
Power source |
Direct drive spur gear transmission driving a high
power 3-phase alternator with high efficiency 3 phase rectification (total
system efficiency of 74%). |
Alternator |
6 pole pair of Zinc coated sintered Neodinium Iron
Boron permanent magnets (N35H Grade).
3-phase winding.
Skewed stator tooth faces to reduce cogging torque while retaining high
efficiency.
Stator laminations 0.5mm laminating steel to specification VM 350-50, double
side insulated to Stabolit 20
Permanently lubricated sintered Oilite bush for long life.
Stainless steel base plate for non-magnetism, corrosion resistance, and strength. |
Transmission and Winder |
Spur gears are manufactured in dissimilar
engineering polymers - glass filled PA6 (nylon) and POM (acetyl) for optimum
gear tooth interface, low noise signature and extended life.
Stainless steel shafts for extended life.
Large winder knob for easy grip
Winder hub and bush are nylon and acetyl respectively for long life.
Winder handle is high strength glass filled nylon. |
Outer Casing |
Thick walls with reinforcement for high structural
and impact strength
Splash resistant
ABS with non-gloss finish for lasting durability
Ultra violet light (UV) stabilised for colour retention and stable mechanical
properties
Cadmium and chlorine-free, and fully recyclable |
Output |
Cigarette Lighter Socket
12V (nominal), 14.2V (max – regulated)
Output current determined by crank speed and typically governed by the load
applied by accessory car charger and recipient device. |
Typical Performance - Mobile Phones |
360 turns (approx. 3 min wind) = 9 - 11 min talk
time
60 second wind = 2 - 4 min talk time |
Dimensions |
Height |
52 mm (2") |
Width |
60 mm (2.4") |
Length |
135 mm (5.3") |
Weight |
310 g (11 oz) |
A-20080305-1396-138-E
*This item is BRAND NEW - not refurbished. It comes with all manufacturer supplied accessories, and full manufacturer's USA warranty.
|