|
|
|
JBL AC2212/64-WRX Compact 2-Way Loudspeaker
with Extreme Weather Protection Treatment, Black DuraFlex finish,
Transducer Power Rating (AES) 300W (1200W peak), 60° x 40° Coverage, PT
Progressive Transition Waveguide for good pattern control with low distortion, Bi-Amp/Passive Switchable, Frequency Range (-10 dB)
50 Hz – 19 kHz,
Frequency Response (+/-3 dB) 55 Hz – 17 kHz, Directivity Factor (Q) 17.8,
Directivity Index (DI) 12.5 dB, System Sensitivity (1W @ 1m) Passive mode 95 dB
SPL, Nominal Impedance 8 ohms
|
General Information |
|
Manufacturer |
JBL |
|
Manufacturer Part Number |
AC2212/64-WRX |
|
Product Name |
Compact 2-way Loudspeaker with Extreme
Weather Protection Treatment |
|
Overview |
AC2212/64 is a compact 2-way fullrange
loudspeaker system comprised of one 300 mm (12 in) low frequency driver
and one 38 mm (1.5 in) exit/25 mm (1 in) voice-coil compression driver.
The PT Progressive Transition waveguide provides 60° by 40° coverage in
vertical cabinet orientation. High-slope passive crossovers minimize
band overlap and well-controlled offaxis response enhances arrayability.
The cabinet is fitted with M10 threaded suspension points. Optional
U-bracket, as well as pre-engineered array bracketry is available for
easy installation. Four threaded inserts located on back of the
enclosure allow attachment of an Omnimount™ or similar mounting bracket.
AC2212/64 is part of JBL’s AE Application Engineered Series, a versatile
family of loudspeakers for a wide variety of fixed installation
applications. |
|
Features |
- 60° x 40° Coverage.
- PT™ Progressive Transition™
Waveguide for good pattern control with low distortion.
- Bi-Amp / Passive Switchable.
- Optional U-Bracket Model MTU-4. (Sold separately)
- Optional planar array frame kit
(Sold
separately)
|
|
Specifications |
|
System |
|
Frequency Range (-10 dB) |
50 Hz – 19 kHz |
|
Frequency Response (±3 dB) |
55 Hz – 17 kHz |
|
Coverage Pattern |
60° x 40° |
|
Directivity Factor (Q) |
17.8 |
|
Directivity Index (DI) |
12.5 dB |
|
Crossover Modes |
Bi-amp/Passive switchable |
|
Passive Crossover Slopes |
3rd order (18 dB/oct) Transitional HP &
LP, 2.1 kHz |
|
Transducer Power Rating (AES) |
300 W (1200 W peak), 2 hrs
250 W (1000 W peak), 100 hrs |
|
Long-Term System Power Rating (IEC) |
Passive mode: 250 W (1000 W peak), 100 hrs |
|
Maximum SPL |
Bi-amp mode: 120 dB-SPL cont avg (126 dB
peak)
Passive mode: 129 dB-SPL cont avg (135 dB peak) |
|
System Sensitivity (1W @ 1m) |
Passive mode: 95 dB SPL |
|
Transducers |
|
Low Frequency Driver |
1 x JBL M112-8 300 mm (12 in) driver with
63 mm (2.5 in) voice coil |
|
Nominal Impedance |
8 ohms |
|
Sensitivity (1W @ 1m, within operational
band) |
95 dB SPL |
|
High Frequency Driver |
JBL 2418H-1/MTA, 38 mm (1.5 in) exit
compression driver, 25 mm (1 in) voice coil |
|
Nominal Impedance |
8 ohms |
|
Sensitivity (1W @ 1m) |
114 dB SPL |
|
Waveguide |
PT-F64HF |
|
Physical |
|
Enclosure |
Trapezoidal with 15 degree side angles, 16
mm exterior grade 11-ply Finnish birch plywood |
|
Suspension Attachment |
15 points (4 top, 4 bottom, 2 each side, 3
rear), M10 threaded hardware. 4 x M8 on rear for Omnimount™ 60 Series |
|
Finish |
Black DuraFlex™ finish |
|
Grille |
Powder coated 14 gauge perforated steel,
with acoustically transparent black foam backing. |
|
Input Connector |
NL4 Neutrik Speakon® and CE-compliant
covered barrier strip terminals. Barrier terminals accept up to 5.2 sq
mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in
parallel with barrier strip for loop-through. |
|
Environmental Specifications |
Mil-Std 810; IP-x3 per IEC529. |
|
Dimensions (H x W x D in vertical cabinet
orientation) |
548 x 355 x 352 mm (21.6 x 14.0 x 13.9 in) |
|
Net Weight |
18.1 kg (40 lb) |
|
Optional Accessories |
M10 x 35 mm forged shoulder eyebolts with
washers U-Bracket MTU-4 |
A-20120725-1250-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
