|
JVC DT-V20L1U Broadcast Studio 20-inch Monitor
with HDSDI, HD resolution 1680 x 945 images, Brightness 400cd/m2, Contrast Ratio
800:1, Response Time 8 msec, Viewing Angle Horizontal/Vertical 170°, Wide SXGA,
16:10 pixel array 1680 x 1050 with built-in UMD, Comprehensive HD signal inputs
(HD SDI x 2, DVI-D, Component & RGB), Accepts 1080/24psf signals, Supports wide
range of HD and computer scan rates, Gold-plated HD SDI connectors, IP
conversion mode can be selected from NORMAL MODE (frame complement and vertical
filter), FIELD (field complement) and CINEMA (for 24p), 4-way remote control
system
|
General Information |
|
Manufacturer |
JVC |
|
Manufacturer Part Number |
DT-V20L1U |
|
Product Name |
Broadcast Studio 20-inch Monitor with HDSDI |
|
Features |
Main Features
- HD resolution 1680 x 945 images
- Wide SXGA, 16:10 pixel array 1680
x 1050 with built-in UMD
- Comprehensive HD signal inputs: HD
SDI x 2, DVI-D, Component & RGB
- Accepts 1080/24psf signals
- Supports wide range of HD and
computer scan rates
- Gold-plated HD SDI connectors
- High performance LCD panel
produces crystal-clear images with faithful color reproduction from
all directions
- IP conversion mode can be selected
from NORMAL MODE (frame complement and vertical filter), FIELD (field
complement) and CINEMA (for 24p)
- 4-way remote control system:
Contact, pulse trigger, RS-485 (via RJ-45) x 2 and RS-232
Additional Features:
- Metal rear cabinet provides
excellent radiation performance and rugged durability
- Compact square, all-in-one design.
Dual-role stand included
- Front rotary digital controls with
analogue look & feel
- Time code on/off function
- VESA 100 mounting holes. Built-in
protection of rear connections
|
|
Specifications |
|
Description |
20" multi-format HDTV/SDTV LCD display
monitor
|
|
Color system |
50Hz & 60Hz, PAL & NTSC
|
|
Screen Size |
20" diagonal |
|
Effective screen size (W x H) |
43.34 x 27.09 cm
|
|
Aspect Ratio |
16:10. Image @ 1680 x 945 and UMD @ 1680 x
105
|
|
LCD Panel |
20" diagonal, active matrix TFT
|
|
No of pixels |
Pixel array: 1680 x 1050 (W-SXGA+)
|
|
Display Colors |
16.7 million
|
|
Viewing Angle |
Horizontal: 170°
Vertical: 170°
|
|
Brightness |
400cd/m²
|
|
Contrast Ratio |
800:1 (typical)
|
|
Response Time |
8 msec
|
|
Scan Frequency |
Horizontal/Vertical Frequency (PC signals):
H: 31.469 kHz - 75.000 kHz
V: 60 Hz ± 5Hz
Depending on the signal within the range of these frequencies, signals
may not be displayed. In this case, "Out of range" is shown.
|
|
Applicable Standard |
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
|
|
Audio output |
Internal: 1.0 W + 1.0 W (L/R)
|
|
Input/Output Terminals |
VIDEO
|
VIDEO 1 & VIDEO 2:
Composite video signal input/output: 1 line, BNC x 2, 1 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection (auto termination))
DVI-D (HDCP):
DVI connector x 1 (compatible with DDC2B)
COMPO./RGB (G/Y, B/Pb/B-Y, R/Pr/R-Y):
Analogue component signal/analogue RGB signal input/output: 1 line, BNC
x 6
Video signal: G/Y: 1 V (p-p), 75 ohms (sync signal included)
B/Pb/B-Y, R/Pr/R-Y: 0.7 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection (auto termination))
EXT. SYNC (CS):
Composite sync signal input/output: 1 line, BNC x 2, 0.3V (p-p) to 4V
(p-p), 75 ohms (bi-polar tri-signal, negative pole binary signals, BB)
(video signals excluded)
(IN and OUT are connected with a bridge connection (auto termination))
HD/SD SDI (IN 1) and (IN 2):
Digital signal input (compatible with EMBEDDED AUDIO):
Auto detection, 1 line, BNC x 1
HD/SD SDI (SWITCHED OUT):
Digital signal output (compatible with EMBEDDED AUDIO):
1 line (switched out), BNC x 1
|
|
AUDIO |
AUDIO ASSIGN (IN 1):
Analog audio signal input: 1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (IN 1):
Analog audio signal input: 1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT):
Analog audio signal output: 1 line, RCA x 2, 500 mV (rms)
|
|
External Control |
MAKE/TRIGGER: RJ-45 x 1 (8-pin)
RS-485: RJ-45 x 2 (IN/OUT) (8-pin)
RS-232C: D-sub (9-pin) x 1
|
|
Power consumption |
Rated current: 1.20 A
|
|
Power requirement |
AC 120/220 to 240V, 50Hz/60Hz
|
|
Operating Temperature |
5°C to 35°C
|
|
Operating Humidity |
20% to 80% (non-condensing)
|
|
Dimensions (WxHxD) |
477 x 354 x 99 mm with stand
477 x 394.6 x 243 mm with stand (low position)
(Excluding protrusions)
|
|
Weight |
7.4 kg (excluding stand)
10.3 kg (including stand)
|
|
Accessories (Supplied) |
AC power cord
Stand
Power cord holder
|
|
Accessories (Optional)
|
RK-C20L1 EIA Rack mount adapter
TS-W20F1 Protection filter
|
A-20080903-1477-130-E
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
