|
|
|
Klark Teknik DN370 Dual Graphic Equializer,
Long-throw 45mm oil-damped faders with dust cover for increased accuracy and
resolution, All-new proportional-Q filters provide optimum control without
undesirable audio artifacts, Gain control with +6dB/-infinity range and centre
detent at unity gain, Range switch selects +/-6dB or +/-12dB operation for the
faders with LED indication, Channel bypass switch with LED indication, Sweepable
high-pass filter with 20Hz to 500Hz range sets the lower frequency limit of the
system, Sweepable low-pass filter with 2kHz to 20kHz range sets the upper
frequency limit of the system, Two sweepable notch filters per channel, with
overlapping frequency ranges of 20Hz to 2kHz and 200Hz to 20kHz
|
General Information |
|
Manufacturer |
Klark Teknik |
|
Manufacturer Part Number |
DN370 |
|
Product Name |
Dual Graphic Equializer |
|
Marketing Information |
The all-new Klark Teknik DN370 is the
latest evolutionary step in a process of design refinement that goes
back over 30 years. With DN370 we’ve started from the ground up and
produced a unit that is totally without compromise, and one that we
believe is the finest professional graphic equaliser in the world today.
It also perfectly complements the existing Klark Teknik range of
equalisers, both analogue and digital.
Our aim is simply to provide discerning professional users with the best
possible solutions for system control. Our market research shows that
the graphic equaliser is still the most commonly-used EQ device in fixed
and mobile live sound applications, as well as many installations,
mainly because the physical user interface provides instant access and
controllability in even the most demanding environments. To this end we
have completely re-evaluated the role of the graphic EQ, focusing
exclusively on providing a new feature set that better reflects the
needs of modern users.
Like all Klark Teknik units, DN370 is engineered for a lifetime of hard
use and carries our 3-year international factory warranty. |
|
Features |
- Long-throw 45mm oil-damped faders
with dust cover for increased accuracy and resolution
- All-new proportional-Q filters
provide optimum control without undesirable audio artifacts
- Gain control with +6dB/-infinity
range and centre detent at unity gain. Allows effective muting of
channel in emergencies
- Range switch selects ±6dB or ±12dB
operation for the faders, with LED indication
- Channel bypass switch with LED
indication. The unit also provides automatic relay bypass in the
event of power failure
- Sweepable high-pass filter with
20Hz to 500Hz range sets the lower frequency limit of the system.
The control incorporates a push switch to select the filter in and
out, with an illuminated ring for "at a glance" status indication.
Invaluable for smooth rejection of unwanted subsonic and low
frequencies, particularly relevant with modern, compact wedge
monitors
- Sweepable low-pass filter with
2kHz to 20kHz range sets the upper frequency limit of the system.
The control incorporates a push switch to select the filter in and
out, with an illuminated ring for "at a glance" status indication.
Provides optimum bandwidth control for vocal monitors and IEM
systems
- Two sweepable notch filters per
channel, with overlapping frequency ranges of 20Hz to 2kHz and 200Hz
to 20kHz. These allow precise removal of problem frequencies with
minimal effect on the rest of the program material, and fast control
of "between fader" frequencies. This gives precise control of room
and loudspeaker resonance/feedback nodes with minimum loss of energy
even between ISO centres. The controls each incorporate a push
switch to select the filter in and out, with an illuminated ring for
"at a glance" status indication.
- Bypass switch with status LEDs for
quick comparison of applied EQ
- Power switch, fully recessed in
the "on" position to avoid accidental operation
- Signal present LEDs show the
presence of audio signals above -40dBu
Multi point clip monitoring. Clip warning LEDs illuminate when the
level exceeds +20dBu (2dB below the onset of clipping) to assist in
optimum system gain setting- Electronically balanced inputs and
outputs (transformer balancing is available as an option).
Connections are provided on both XLRs (pin 2 hot) and Phoenix-type
strip connectors for fixed installation
- IEC mains inlet. The unit
automatically adjusts for operation on all voltages from 100 to 240V
AC
|
|
Specifications |
|
Inputs Two |
Type Electronically balanced (pin 2 hot)
Impedance (Ω) 20k
Maximum input level +22dBu |
|
Outputs Two |
Type Electronically balanced (pin 2 hot)
Minimum load impedance 600 Ω
Source impedance <60 Ω
Maximum output level +22dBu into >2kΩ |
|
Performance |
Frequency response relative to signal at
1kHz ±0.5 dBu 20Hz-20kHz
EQ out ±0.5 dBu
EQ in (flat) ±0.5 dBu
Distortion (THD+N) < 0.003% @ 1kHz +4 dBu
Dynamic range >114dB (20Hz-20kHz unweighted, ±12dB range)
Overload indicator +20 dBu
Gain - ∞ to +6dBu
Equalisation 30 Bands
Centre Frequencies To BS EN ISO 266:1997 25Hz-20kHz, 1/3 octave
tolerance ±5%
Maximum Boost/Cut ±12dB, ±6dB
High Pass Filter Slope 12 dB/octave
Low Pass Filter Slope 12 dB/octave
Notch filter attenuation >17dB
Q=32 |
|
Terminations |
Audio 3-pin XLR and 6-pin Phoenix
Power 3-pin IEC |
|
Power Requirements |
Voltage 100V-240V a.c.
Consumption <60W |
|
Weight |
Nett 5.8kg
Shipping 7.0kg |
|
Dimensions |
Height 133mm (5.25 inch) (3U High)
Width 482mm (19 inch)
Depth 205mm (8 inch) |
|
Options |
Input and output balancing transformers |
A-20120114-1250-130-L
M-20180604-1250-200-L
*This item is BRAND NEW - not refurbished. It comes with all
manufacturer supplied accessories; and full manufacturer's USA
warranty.
|
