General
Information |
Manufacturer
|
Listen Technologies |
Manufacturer Part
Number |
LCS-122-01
|
Product Name
|
Wi-Fi\IR Advanced System
|
Overview |
This system
combines Wi-Fi and IR technologies to give compliant audio
coverage PLUS expanded audio coverage to everyone with a
Smartphone or tablet |
Features |
Extended Audio Reach
Easy and Convenient
Free Smartphone App
The IR system shall be
transmitted to a receiving device as defined below
The audio over Wi-Fi
shall be delivered to the personal smart device via a
free application downloaded onto the personal device
The assistive listening
system shall be capable of broadcasting audio over
both Infrared (IR) and 2.4/5.0 GHz Wi-Fi frequencies,
allowing users to receive the audio through a
receiving device with ear speaker/headphones or
directly to Bluetooth enabled hearing aids
The 2.4/5.0 GHz
frequency shall be transmitted to personal smart
devices such as cellular phones and tablets through a
free application as defined below
The Infrared
Transmitter/Radiator Combo shall be capable of
broadcasting up to two audio channels with the choice
of four mono carrier frequencies, 2.3, 2.8, 3.3, and
3.8 MHz
Channel carrier
selections shall be set via a back panel rotary
switches
The Transmitter/Radiator
coverage area shall be up to 30,000 ft2 with single
channel transmission when using the LR-4200-IR
The device shall have a
timer that shuts off the carriers after 15 minutes
when no audio is present at the inputs
The device shall have
two independent mixing audio inputs, one for each
transmission channel
The Transmitter/Radiator
shall provide both power and audio signal for up to
Four Expansion Radiators over CAT-5e cable
The Listen Technologies
LT-84 is specified
The stationary audio
over Wi-Fi server shall be capable of delivering 1
mono / 2 stereo audio channels in 1 RU space and shall
be capable of connecting to and residing on the venues
existing local area network (LAN) via a single RJ45
Ethernet connection
Venue content and
channel listings shall be administered through a cloud
managed service
The audio over Wi-Fi
server shall be compatible with the latest Wi-Fi IEEE
802.11 standards and capable of handling up to 1,000
simultaneous users
The Listen Technologies
Audio Everywhere MX5-1 is specified
The IR receiver shall be
capable of receiving on one of four wide band channels
(carriers), Channel 1 (2.3 MHz), Channel 2 (2.8 MHz),
Channel 3 (3.3 MHz) and Channel 4 (3.8 MHz)
The receiver shall have
the option of being lanyard or belt clip worn and the
lanyard shall incorporate an integrated neck loop for
compatibility with T-coil hearing aids
The receiver shall be
intelligent and provide customized audio to either
earphones or the integrated neck loop based upon which
is connected
The receiver shall have
two 3.5 mm (TRRS) connectors to drive the integrated
neck loop lanyard or up to two mono or stereo
earphones
The receiver shall
incorporate a multi-functional display (OLED) that
indicates battery status, inventory number, volume
level and a customizable channel name
The receiver shall
employ a unique iDSPTM noise reduction technology
The receiver shall be
fully programmable via PC software
The receiver shall have
a micro USB connector used for programming/setup,
inventory control, charging and firmware upgrades
The receiver shall
incorporate automatic battery charging circuitry and
use a non-proprietary lithium ion battery
The receiver shall
automatically turn on when removed from the charging
device and automatically turn off when returned to the
charging device
The receiver shall have
additional charging contacts to allow for multiple
charging options
The receiver shall have
a signal-to-noise ratio of 60 dB or greater, THD less
than 2 percent and shall have an audio frequency
response of 63 Hz – 15 kHz (+/-3 dB)
The Wi-Fi receiver shall
be personal smart devices such as cellular phones and
tablets as provided by the users
When the free
application is launched, the personal smart device
will automatically connect to the audio over Wi-Fi
server
The application will
list the available channels and play the audio when
selected by the user
The free application
shall also be capable of containing user documentation
and instructions in addition to ads, promotional
banners and videos
The app shall be
customizable, allowing the venue to load in its color
pallet and logos
The Listen Technologies
Audio Everywhere App is specified
|
Specification |
Includes
|
One MX5-1 AE 2
Channel (mono) Wi-Fi Server
One LW-100 AE Venue Awareness Kit
One LT-84-01 ListenIR 2-Channel Transmitter/Radiator Combo
One LPT-A117 Remote Power Supply Kit (For LT-84)
One LPT-A107-B Dual RCA to Dual RCA Cable 6.6 FT. (2 M)
Two LR-4200-IR Intelligent DSP IR Receiver
Two LA-401 Universal Ear Speaker
Two LA-430 Intelligent Ear Phone/Neck Loop Lanyard
One LA-423 4-Port USB Charger |
AE 2 Channel (mono) Wi-Fi Server
|
Interconnections
|
Audio
Inputs
|
Rear panel,
Two female RCA (Right, Left), -14 dBu (Line) nominal input
level, -2 dBu maximum input level, impedance 15 kOhms
|
Ethernet
|
RJ-45: 100
BaseT or 1000 BaseT (gigabit)
|
USB
|
Type A 2.0
(female)
|
Analog
|
RCA |
Power Supply
|
Connector
|
Micro USB
|
Imput
Voltage
|
100-240 VAC
50-60 Hz
|
Output
Voltage
|
5 VDC
|
Current
|
1 A
|
Power
|
5 W
|
Server
|
IP Address
|
DHCP, Static,
Reserved
|
Prioritization
|
QoS/ToS |
Users
|
150 (per
server)
|
Max
Channels
|
2 mono
|
WAP Support
|
802.11n or
better w/WMM enabled
|
Supported
WAP Frequencies
|
2.4 GHz and 5
GHz
|
Bandwidth
Use
|
Approx. 140
kbps per user
|
App Support
|
iOS/Android |
Cloud
Service
|
Yes |
Regulatory
|
FCC, CE, RoHS
|
Multiple servers may be used to increase the
number of channels
Audio
Everywhere from Listen servers are cloud managed with
customizable in-app functions which support welcome
messages, videos, sliding banners, pdf documents, offers
and supports portable smart iOS and Android devices
|
ListenIR 2-Channel Transmitter/Radiator Combo
|
Audio
|
Frequency
Response
|
20 Hz - 20 kHz
(+/- 1 dB) line input
63 Hz -15 kHz (+/- 3 dB) system specification (wireless
end-to-end with LR-44)
|
Signal-to-Noise
Ratio
|
More than 70
dB (SNR) line input
More than 60 dB (SNR) system specification (wireless
end-to-end with LR-44)
|
Microphone
Input
|
Two 3.5 mm
Tip/Sleeve connector -30 dBu nominalvinput, +14 dB headroom,
impedance 4.4 kOhms, 5 VDC bias supply
|
Total
Harmonic Distortion
|
Less than 0.1
percent (THD) line input
Less than 2 percent (THD) system specification (wireless
end-to-end with LR-44)
|
Unbalanced
Line Input
|
Stereo/Mono
Input. Two dual (RCA) phono connectors, unbalanced, -10
dBu nominal input, +14 dB headroom, Impedance 10 kOhms
|
Balanced
Line Input
|
Mono Input.
Two Phoenix Type connectors, balanced, +4 dB unominal
input, +14 dB headroom, mpedance 100 kOhms
|
Controls
|
Power
Switch
|
Three position
Switch
Power Off, Power On
Indicator Lights Off, Power On
Indicator lights On
|
Carrier
Frequency Selection
|
Two, four
position rotary switches (2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8
MHz)
|
Level
Control Knob
|
Two audio
taper rotary potentiometer, counter-clockwise decreases
input mix level, clockwise increases input mix level
|
Indicators
|
Power
Supply LED
|
Green LED on
in-line power supply indicates AC power is applied
|
Audio Level
Indicators
|
Two Green
LED's, two Red LED's, Green LED indicates Audio presence
and Red LED indicates peaks inthe audio
|
RJ-45 Amber
LED
|
Solid Amber
indicates carrier ir present and IR is being transmitted
|
RJ-45 Green
LED
|
Solid Green
indicates power is applied to unit, flashing indicates
unit has entered power save mode
|
RF
|
Carrier
Frequencies
|
2.3 MHz, 2.8
MHz, 3.3 MHz, 3.8 MHz, Selectable |
Number of Channels
|
Two channels,
Selectable carrier frequency
|
Frequency
Accuracy
|
+/-0.005
percent stability 0 to 50 degrees celsius
|
Transmitter
Stability
|
50 PPM
|
Modulation
|
FM Wideband,
+/- 50 kHz deviation max, 50 uS pre-emphasis
|
Power Save
Mode
|
Carrier will
shut off when no audio is present for 15 minutes on both
channels to preserve radiator life
|
Expansion
Link Output
|
Two RJ-45
connectors - Provides RF Signal and Power, CAT-5e cable 24
AWG, 100 ft. maximum cable length, two LA-141S per output
connector
|
IR
|
Coverage
Area
|
30000 ft2
single channel with LR-4200-IR/LR-5200-IR receivers or
7500 ft2 single channel with LR-42/LR-44 receivers
|
IR Emitter
Power
|
1.49 W
|
Power
|
Power
Supply Input
|
100-240 VAC
50-60 Hz
|
Power
Supply Output
|
12 VDC
4 A
48 W
|
Power Supply
Connector
|
2.5 mm ID
barrel connector, center positive
|
Power
Output
|
Two RJ-45
connectors. providing Power and RF signal for up to two
LA-141 expansion radiators on each output
|
Power
Supply Type
|
In-line
swithching mode power supply, Listen part number LA-210
|
Physical
|
Color
|
Black with
White Silk Screening
|
Mounting
|
Can be mounted
on a wall, ceiling, or table with provided hardware
(screws and hollow wall anchors not provided) |
Enviromental
|
Temperature
- Operation
|
14 to 104
degrees fahrenheit
|
Temperature
- Storage
|
-4 to 122
degrees fahrenheit
|
Relative
Humidity
|
0 to 95
percent relative humidity, non-condensing
|
Compliance
|
Standards
|
FCC part 15,
ICS-03, CE, UL, CUL, C-Tick, CCC, PSE, KC, GS, RoHS, WEEE |
Power
Supply Compliance Marks
|
CUL, UL, CE,
CCC, C-Tick, KC, PSE, GS, FCC, RoHS |
Remote Power Supply Kit (For LT-84)
|
Physical
|
Color
|
Black |
Adapter
Connections
|
DC plug type,
0.2" OD, center positive and RJ-45
|
Dual RCA to Dual RCA Cable 6.6 FT. (2 M)
|
Interconnections
|
Connectors
|
Dual RCA (male)
to Dual RCA (male)
|
Physical
|
Cable Length
|
6.6'
|
Intelligent DSP IR Receiver
|
Audio
|
System
Distortion
|
Less than
harmonic distortion (THD) at 80 percent deviation
|
Audio
Output Jacks
|
Two 3.5 mm
connectors, unbalanced, 0 dBu nominal output level, 16 mW
maximum, impedance 32 Ohms, accepts mono or stereo phono
plug or LA-430 Intelligent Ear Phone/Neck Loop Lanyard
|
System
Frequency Response
|
63 Hz - 15 kHz
(+/- 3 dB)
|
System
Signal to Noise Ratio
|
More than 60
dB
|
Controls
|
User
Controls
|
Power on/off
and volume up/down
|
Programming
|
Via software
and USB port, Auto Seek, Jack Sense, Squelch, Auto Power,
Auto Off, Stereo, Brightness, Channel Name
|
Set-up
Controls
|
Press and hold
up/down volume buttons for 5 seconds to enterchannel
adjust, use up/down to select channel
|
Indicators
|
Display
|
OLED - Channel
designation, battery level, unit number, charging status,
volume status
|
LED
|
Flashes when
batteries are low or to indicate charging, solid when
fully charged
|
RF
|
Carrier
Frequencies
|
2.3 MHz, 2.8
MHz, 3.3 MHz, 3.8 MHz
|
Number of
Channels
|
Four
selectable channels
|
Frequency
Accuracy
|
+/- 0.005
percent stability 32 to 122 degrees fahrenheit
|
Modulation
|
FM Wideband,
+/- 50 kHz deviation max, 50 uS de-emphasis
|
IR
|
Coverage
Area
|
30000ft2
single channel with LT-84
|
Squelch
|
Programmable
in 20 steps, automatic on loss of IR signal
|
Power Save
Mode
|
Turn unit off
after a specified time of no IR signal, default is 30
minutes
|
Sensitivity
|
Better than
one nW/cm2 at 40 dB SNR
|
Power
|
Power
Supply
|
Micro USB
connector
5 V 500 mA
|
Battery
Type
|
Lithium Ion
|
Battery
Life
|
8 hours of
typical use
|
Battery
Charging Time
|
Fully charged
in 2.5 hours
|
Physical
|
Color
|
Flat Black
|
Enviromental
|
Temperature
- Operation
|
14 to 104
degrees fahrenheit
|
Temperature
-Storage
|
-4 to 122
degrees fahrenheit
|
Relative
Humidity
|
0 to 95
percent relative humidity, non-condensing
|
Compliance
|
Standards
|
FCC Part 15,
ICS-03, CE, RoHS, WEEE, ADA 706, CBC 11B-706 |
Universal Ear Speaker
|
Audio
|
Frequency
Response
|
200 Hz - 20
kHz
|
Impedance
|
32 Ohms +/- 15
percent at 1 kHz
|
Input
Sensitivity
|
115 dB +/- 4
dB at 1 kHz, 1 mW
|
Rated Power
Input
|
50 mW
|
Max Power
Input
|
100 mW
|
Interconnections
|
Connector/s
|
Male 3.5 mm
(TRS)
|
Physical
|
Color
|
Dark Gray
|
Cable
Length
|
13", extension
cable is 28"
|
Compliance
|
Standards
|
RoHS |
Intelligent Ear Phone/Neck Loop Lanyard
|
Interconnections
|
Connection
to Receiver
|
Male 3.5 mm
(TRRS) to Male 3.5 (TRRS)
|
Connection
to Short Ear Phone
|
Female 3.5 mm
(TRS)
|
Loop
|
Neck Loop
Field Strength
|
400 mA/m (+/-
3 dB)
|
Neck Loop
Frequency Response
|
100 Hz to 5
kHz (+/- 3 dB ref 1 kHz)
|
Physical
|
Color
|
Black |
Cord Length
|
29" |
Compliance
|
Standards
|
RoHS,
IEC60118-4
|
4-Port USB Charger
|
Power
|
Power
Supply Input
|
100-240 V
50-60 Hz
0.5 A
|
Power
Supply Output
|
5.0 VDC
4.2 A
|
Physical
|
Color
|
Black |
Cable
Length
|
36"
|
Cable Type
|
4 - USB to
Micro USB Cables (LA-422)
|
Compliance
|
Standards
|
UL, FCC, RoHS
|
Weight and Dimensions
|
Weight
|
20 lbs
|