General
Information |
Manufacturer
|
Listen Technologies |
Manufacturer Part
Number |
LCS-121-01-D
|
Product Name
|
Wi-Fi/RF Advanced System (Dante)
|
Overview |
This advanced
combo Wi-Fi/RF Advanced System known as LCS-121-01-D from
Listen Technologies comes with Dante Assistive Listening
capability. Combining Wi-Fi and RF technologies to give
compliant audio coverage this assistive listening system
is capable of broadcasting audio over both the 72 MHz
frequency and 2.4/5.0 GHz Wi-Fi frequencies. This will
allow users to receive the audio through a receiving
device with ear speaker/headphones or directly to
Bluetooth enabled hearing aids PLUS expanded coverage to
everyone with a Smartphone. The Wi-Fi System comes with an
external audio interface adapter for Dante multi-channel
digital media networking capabilities |
Features |
Extended Audio Reach
Dante Capabilities
Free Smartphone App
The application will
list the available channels and play the audio when
selected by the user
The output power shall
be adjustable to quarter, half or full
The assistive listening
system shall be capable of broadcasting audio over
both the 72 MHz frequency and 2.4/5.0 GHz Wi-Fi
frequencies, allowing users to receive the audio
through a receiving device with ear speaker/headphones
or directly to Bluetooth enabled hearing aids
The 72 MHz frequency
shall be transmitted to a receiving device as defined
below
The 2.4/5.0 GHz
frequency shall be transmitted to personal smart
devices such as cellular phones and tablets through a
free application as defined below
The system shall be
capable of connecting to a Dante network via an
external audio interface adapter
The stationary RF
transmitter shall be capable of broadcasting on 57
channels
The transmitter shall
have an SNR of 80 dB or greater
Channel tuning shall be
capable of being locked
The device shall have an
audio frequency response of 50 Hz to 15k Hz, +/-3 dB
at 72 MHz
It shall have two mixing
audio inputs and a mixed signal output
The device shall have
the following audio controls: input level, mix level
and an adjustable low pass filter (contour)
The device shall have an
audio processor that is capable of automatic gain
control and limiting
The Listen Technologies
LT-800-072 is specified
The stationary audio
over Wi-Fi server shall be capable of delivering 1
mono / 2 stereo audio channels in 1 RU space and shall
be capable of connecting to and residing on the venues
existing local area network (LAN) via a single RJ45
Ethernet connection
Venue content and
channel listings shall be administered through a cloud
managed service
The audio over Wi-Fi
server shall be compatible with the latest Wi-Fi IEEE
802.11 standards and capable of handling up to 1,000
simultaneous users
The Listen Technologies
Audio Everywhere MX5-1 is specified
The RF receiver shall be
capable of receiving on 57 wide and narrow band
channels
The receiver shall have
a signal-to-noise ratio of 80 dB or greater and shall
have an audio frequency response of 50 Hz – 15 kHz
(+/-3 dB)
The device shall employ
a unique DSP SQTM noise reduction technology
The unit shall have a
programmable squelch circuit
The unit shall
incorporate a multi-functional display that indicates
battery status, inventory number and channel
The device shall have
the option of being lanyard or belt clip worn and the
lanyard shall have the option of an integrated neck
loop
The device shall have a
USB connector used for inventory control, set up,
charging and firmware upgrades
The device shall
incorporate automatic battery charging circuitry and
use a non-proprietary lithium ion battery
The device shall have
additional charging contacts to allow multiple
charging options
The Listen LR-4200-072
is specified
The Wi-Fi receiver shall
be personal smart devices such as cellular phones and
tablets as provided by the users
The audio over Wi-Fi
shall be delivered to the personal smart device via a
free application downloaded onto the personal device
When the free
application is launched, the personal smart device
will automatically connect to the audio over Wi-Fi
server
The free application
shall also be capable of containing user documentation
and instructions in addition to ads, promotional
banners and videos
The app shall be
customizable, allowing the venue to load in its color
pallet and logos
The Listen Technologies
Audio Everywhere App is specified
|
Specification |
In The Box
|
One MX5-1 AE 2 Channel (mono) Wi-Fi Server
One LW-100 AE Venue Awareness Kit
One LT-800-072-01 Stationary RF Transmitter (72 MHz)
One LA-304 Assistive Listening Notification Signage Kit
One LA-122 Universal Antenna Kit (72 MHz)
One LA-326 Universal Rack Mount Kit
One LPT-A107-B Dual RCA to Dual RCA Cable 6.6 FT. (2 M)
Two LR-4200-072 Intelligent DSP RF Receiver (72 MHz)
Two LA-401 Universal Ear Speaker
Two LA-430 Intelligent Ear Phone/Neck Loop Lanyard
One LA-423 4-Port USB Charger
One LA-466 Dante 2 Channel Output XLR Adapter |
AE 2 Channel (mono) Wi-Fi Server
|
Interconnections
|
Audio Inputs
|
Rear panel, Two Female RCA (Right,
Left), -14 dBu (line) nominal input level, -2 dBu maximum
input level, impedance 15k Ohms
|
Ethernet
|
RJ-45: 100 BaseT or 1000
BaseT (gigabit)
|
USB
|
Type A 2.0 (Female)
|
Analog
|
RCA |
Power Supply
|
Connector
|
Micro USB
|
Input Voltage
|
100-240 VAC
50-60 Hz
|
Output Voltage
|
5 VDC
|
Current
|
1 A
|
Power
|
5 W
|
Servers
|
IP Address
|
DHP, Static, Reserved
|
Prioritization
|
QoS/ToS |
Users
|
150 (Per Server)
|
Max Channels
|
2 Mono
|
Wap Support
|
802.11n or better w/WMM enabled
|
Supported WAP Frequencies
|
2.4 GHz and 5 GHz
|
Bandwidth Use
|
Approx. 140 kbps per user
|
App Support
|
iOS/Android |
Cloud Service
|
Yes |
Regulatory
|
FCC, CE, RoHS
|
Multiple
servers may be used to increase the number of channels
|
Audio Everywhere from Listen servers are cloud
managed with customizable in-app functions which support
welcome messages, videos, sliding banners, pdf
documents, offers and supports portable smart iOS and
Android devices
|
Stationary RF Transmitter (72 MHz)
|
Audio
|
Frequency Response
|
50 Hz - 15 kHz (+/- 3 dB)
|
Signal-to-Noise Ratio
|
SQ enabled 80 dB, SQ disabled 60
dB
|
Audio Input 1
|
Rear panel,
one Female XLR or 1/4 in combo connector, balanced, 0 /
-55 dBu (line/mic) nominal input level adjustable, -30 /
+21 dBu (line/mic) maximum input level, impedance 20k / 1k
ohm (line/mic), phantom power +12 VDC |
Audio Input 2
|
Rear panel,
two phono connectors, unbalanced, -10 / +10 dBu nominal
input level adjustable, +30 dBu maximum, impedance 100k
ohm |
Audio Processing
|
Compression can be turned on/off,
slope internally adjustable from 1:1 to 4:1, default 2:1
|
Contour
|
Cuts and boosts Frequencies above
5 kHz
|
Distortion
|
less than 2 percent total harmonic
distortion (THD at 80 percent deviation
|
Audio Output
|
Input 1 and input 2, mixed output
(rear panel), two phono connectors, unbalanced, -10 dBu
nominal output level, +15 dBu maximum, impedance 10 ohm |
Headphone Output
|
Front panel, one 3.5 mm stereo
connector, unbalanced, adjustable output level, +3 dBu
maximum, impedance 10 ohms
|
Controls
|
User Controls
|
Front Panel: Power, test
tone on/off, channel up/down, input levels, mix level,
contour, monitor volume control
Rear Panel: Input 1 Level, (Line, Mic, Mic-Phantom
Power), Input 2 level (-10 / +10 dBu), RF power level
(low, mid, high) |
Internal Adjustments
|
Compression Ratio Fot Audio
Processor
|
Programming
|
SQ On/Off
Process On/Off
Channel Lock
|
Indicators
|
LCD
|
Channel designation
Lock status
RF power level
Programming (fron panel)
|
Audio Input Status LEDs
|
Indicates Input 1, Input 2, and
Mix audio levels
10 segment LED's (8 green, 2 red) |
Processing
|
Indicates by a green LED when on
(Front Panel)
|
Test Tone
|
Red LED illuminates when test tone
is enabled
|
RF Power
|
Indicated on the LCD (low, mind,
high)
|
RF
|
Frequency Range
|
72025 - 75950 MHz
|
Number of Channels
|
17 wide band, 40 narrow band
|
Frequency Accuracy
|
+/- 0.005 percent stability
+ 32 to 122 degrees fahrenheit
|
Antenna Type
|
Various antennas available
|
Transmitter Stability
|
50 PPM
|
Transmission Range
|
Up to 1000 ft
|
Antenna Connector
|
BNC |
Output Power
|
80000 uV at 3 m
|
Number of Simultaneous
Tranmitters
|
6 |
Power
|
Power Supply
|
In line power supply
Listen part number LA-207 (Line cord is determined by the
each country's AC power standards)
|
Power Supply Input
|
100-240 VAC
50-60 Hz
0.4 A
|
Power supply Output
|
12 VDC
1.3 A
15.6 W
|
Power Supply Connector
|
0.02" OD
0.01" ID
Barrel type |
Compliance
|
UL, CE, GS, TUV, RoHS
|
Physical
|
Color
|
Dark Grey with White silk
screening
|
Rack Mounting
|
One rack space height, 1/2 rack
space wide
One or two transmitters can be mounted in one rack space,
optional rack mount |
Environmental
|
Temperature - Operation
|
14 to 104 degrees fahrenheit
|
Temperature - Storage
|
-4 to 122 degrees fahrenheit
|
Relative Humidity
|
0 to 95 percent relative humidity,
non condensing
|
Compliance
|
Safety
|
RoHS |
RF
|
FCC Part 15, Part 90, Industry
Canada
|
Universal Antenna Kit (72 MHz)
|
Interconnections
|
Connector/s
|
BNC |
RF
|
Frequency Range
|
72 MHz - 72.025 MHz - 75.975 MHz -
216 MHz - 216.0125 MHz - 216.9875 MHz
|
Number of Channels
|
72 MHz - 57 (17 wide band, 40
narrow band)
216 MHz - 57 (19 wide band, 38 narrow band) |
Antenna Type
|
Monopole and Dipole
|
Unity Gain
|
0 dB
|
Typical Range
|
Range up to 1000 ft at 72 MHz,
3000 ft at 216 MHz
|
Physical
|
Mounting
|
Wall mount, dual and single
electrical box, ceiling electrical box, horizontal surface
mount (such as on top of a rack), ceiling/inverse
mounting, flexible mounting in-wall or in ceiling and mast
or conduit mount
Includes self-tapping sheet metal screws, drywall anchors,
and all hardware required to mount to electrical boxes.
Does not provide hardware required to mount to a mast
(available at most hardware stores)
Bracket Dimensions: 4.5" x 7.0" x 2.5"
Grounding Base Dimensions: 8.0" x 8.0" x 2.0"
Mounting Plate Dimensions: 4.48" x 4.55")
|
Dual RCA to Dual RCA Cable 6.6 FT. (2 M)
|
Interconnections
|
Connectors
|
Dual RCA (male) to Dual RCA (Male)
|
Physical
|
Cable Length
|
6.6' |
Intelligent DSP RF Receiver (72 MHz)
|
Audio
|
System Distortion
|
Less than 2 percent total harmonic
distortion (THD) at 80 percent deviation
|
Output/S
|
Two 3.5 mm connectors
Unbalanced
0 dBu nominal output level
16 mW maximum
Impedance 32 ohm
|
System Frequency Response
|
50 Hz - 15 kHz (+/- 3 dB)
|
System Signal to Noise Ratio
|
SQ enabled 80 dB
SQ disabled 60 dB
|
Controls
|
User Controls
|
Power, Up/down volume
|
Programming
|
Via Software and USB port
|
Set-up Controls
|
Press and hold up/down volume
buttons for 5 seconds to enter channel adjust, use up/down
to select channel
|
Indicators
|
LEDs
|
Flashes when batteries are low or
to indicate charging, solid when fully charged
|
Display
|
Channel designation, battery
level, unit number, charging status
|
RF
|
Frequency Range
|
72.0250 - 75.9500 MHz
|
Number of Channels
|
17 wide band, 40 narrow band
|
Sensitivity
|
0.6 uV Typical, 1 uV Maximum for
12 dB SINAD
|
Frequency Accuracy
|
+/- 0.005 percent Stability32 to
122 degrees fahrenheit
|
Squelch
|
Programmable in 20 stepsm automatic
on loss of RF signal
|
Antenna Type
|
Uses ear phone/neck loop lanyard
and short ear phone cable or standard earphone cable
|
Power
|
Power Supply
|
Micro USB Connector, 5 V, 500 mA
|
Battery Type
|
Lithium Ion 3.7 Vdc, 1200 mAh
|
Battery Life
|
8 Hours of continuous use
|
Battery Charging Time
|
Fully charged in 2.5 Hours
|
Physical
|
Color
|
Black |
Environmental
|
Temperature - Operation
|
14 to 104 degrees fahrenheit
|
Temperature - Storage
|
-4 to 122 degrees fahrenheit
|
Relative Humidity
|
0 to 95 percent relative humidity,
non-condensing
|
Compliance
|
Standards
|
FCC Part 15, Part 90, Industry
Canada, RoHS
|
Universal Ear Speaker
|
Audio
|
Frequency Response
|
20 Hz - 20 kHz
|
Impedance
|
32 ohm +/- 15 percent at 1 kHz
|
Input Sensitivity
|
115 db +/- 4 dB at 1 kHz, 1 mW
|
Rated Power Input
|
50 mW
|
Max Power Input
|
100 mW
|
Interconnections
|
Connector/s
|
Male 3.5 mm (TRS)
|
Physical
|
Color
|
Dark Gray
|
Cable Length
|
13", Extension cable is 28"
|
Compliance
|
Standards
|
RoHS |
Intelligent Ear Phone/Neck Loop Lanyard
|
Interconnections
|
Connection to Receiver
|
Male 3.5 mm (TRRS) to Male 3.5 mm
(TRRS)
|
Connection to Short Ear Phone
|
Female 3.5 mm (TRS)
|
Loop
|
Neck Loop Field Strength
|
400 mA/m (+/- 3 dB)
|
Neck Loop Frequency Response
|
100 Hz to 5 kHz (+/- 3 dB ref 1
kHz)
|
Physical
|
Color
|
Black |
Cord Length
|
29" |
Compliance
|
Standads
|
RoHS, IEC60118-4
|
4-Port USB Charger
|
Power
|
Power Supply Input
|
100-240 V
50-60 Hz
0.5 A
|
Power Supply Output
|
5.0 VDC
4.2 A
|
Physical
|
Color
|
Black |
Cable Length
|
36" |
Cable Type
|
4 - USB to Micro USB Cables
|
Compliance
|
Standards
|
UL, FCC, RoHS
|
Dante 2 Channel Output XLR Adapter
|
Physical
|
Color
|
Black |
Cable Length
|
11" |
Audio Connection
|
XLR |
Power
|
Type Required
|
Power Over Ethernet Switch or
802.3af Compliant POE Injector
|
Weight and Dimensions
|
Weight
|
30 lbs
|