General
Information |
Manufacturer
|
Listen Technologies |
Manufacturer Part
Number |
LCS-122-01-D
|
Product Name
|
Wi-Fi\IR Advanced (Dante) System
|
Overview |
This system
combines Wi-Fi and IR technologies to provide compliant
audio coverage PLUS expanded audio coverage to everyone
with a Smartphone or tablet. The System comes with Dante
multi-channel digital media networking capabilities
|
Features |
Extended Audio Reach
Dante Capabilities
The assistive listening
system shall be capable of broadcasting audio over
both Infrared (IR) and 2.4/5.0 GHz Wi-Fi frequencies,
allowing users to receive the audio through a
receiving device with ear speaker/headphones or
directly to Bluetooth enabled hearing aids
Free Smartphone App
The (IR) system shall be
transmitted to a receiving device as defined in 2.01 B
and D
The 2.4/5.0 GHz
frequency shall be transmitted to personal smart
devices such as cellular phones and tablets through a
free application as defined in 2.01 C and E
The system shall be
capable of connecting to a Dante network via an
external audio interface adapter (POE required)
The Infrared
Transmitter/Radiator Combo shall be capable of
broadcasting up to two audio channels with the choice
of four mono carrier frequencies, 2.3, 2.8, 3.3, and
3.8 MHz
Channel carrier
selections shall be set via a back panel rotary
switches
The Transmitter/Radiator
coverage area shall be up to 30,000 ft2 with single
channel transmission when using the LR-4200-IR
The device shall have a
timer that shuts off the carriers after 15 minutes
when no audio is present at the inputs
The device shall have
two independent mixing audio inputs, one for each
transmission channel
The Transmitter/Radiator
shall provide both power and audio signal for up to
Four Expansion Radiators over CAT-5e cable
The Listen Technologies
LT-84 is specified
The stationary audio
over Wi-Fi server shall be capable of delivering 1
mono / 2 stereo audio channels in 1 RU space and shall
be capable of connecting to and residing on the venues
existing local area network (LAN) via a single RJ45
Ethernet connection
Venue content and
channel listings shall be administered through a cloud
managed service
The audio over Wi-Fi
server shall be compatible with the latest Wi-Fi IEEE
802.11 standards and capable of handling up to 1,000
simultaneous users
The Listen Technologies
Audio Everywhere MX5-1 is specified
The IR receiver shall be
capable of receiving on one of four wide band channels
(carriers), Channel 1 (2.3 MHz), Channel 2 (2.8 MHz),
Channel 3 (3.3 MHz) and Channel 4 (3.8 MHz)
The receiver shall have
the option of being lanyard or belt clip worn and the
lanyard shall incorporate an integrated neck loop for
compatibility with T-coil hearing aids
The receiver shall be
intelligent and provide customized audio to either
earphones or the integrated neck loop based upon which
is connected
The receiver shall have
two 3.5 mm (TRRS) connectors to drive the integrated
neck loop lanyard or up to two mono or stereo
earphones
The receiver shall
incorporate a multi-functional display (OLED) that
indicates battery status, inventory number, volume
level and a customizable channel name
The receiver shall
employ a unique iDSPTM noise reduction technology
The receiver shall be
fully programmable via PC software
The receiver shall have
a micro USB connector used for programming/setup,
inventory control, charging and firmware upgrades
The receiver shall
incorporate automatic battery charging circuitry and
use a non-proprietary lithium ion battery
The receiver shall
automatically turn on when removed from the charging
device and automatically turn off when returned to the
charging device
The receiver shall have
additional charging contacts to allow for multiple
charging options
The receiver shall have
a signal-to-noise ratio of 60 dB or greater, THD less
than 2 percent and shall have an audio frequency
response of 63 Hz – 15 kHz (+/-3 dB)
The Wi-Fi receiver shall
be personal smart devices such as cellular phones and
tablets as provided by the users
The audio over Wi-Fi
shall be delivered to the personal smart device via a
free application downloaded onto the personal device
When the free
application is launched, the personal smart device
will automatically connect to the audio over Wi-Fi
server
The application will
list the available channels and play the audio when
selected by the user
The free application
shall also be capable of containing user documentation
and instructions in addition to ads, promotional
banners and videos
The app shall be
customizable, allowing the venue to load in its color
pallet and logos
The Listen Technologies
Audio Everywhere App is specified
|
Pictures |
|
Specification |
Furnish and
install a COMBO Wi-Fi/IR w/Dante assistive listening
system
|
One (1) MX5-1 AE 2 Channel (mono)
Wi-Fi Server
One (1) LW-100 AE Venue Awareness Kit
One (1) LT-84-01 ListenIR 2-Channel Transmitter/Radiator
Combo
One (1) LPT-A117 Remote Power Supply Kit (For LT-84)
One (1) LPT-A107-B Dual RCA to Dual RCA Cable 6.6 FT. (2
M)
Two (2) LR-4200-IR Intelligent DSP IR Receiver
Two (2) LA-401 Universal Ear Speaker
Two (2) LA-430 Intelligent Ear Phone/Neck Loop Lanyard
One (1) LA-423 4-Port USB Charger
One (1) LA-466 Dante 2 Channel Output XLR Adapter |
AE 2 Channel (mono) Wi-Fi Server
|
Interconnections
|
Audio Inputs
|
Rear panel
Two female RCA (Right, Left)
-14 dBu (line) nominal input level
-2 dBu maximum input level
Impedance 15 kOhms
|
Ethernet
|
RJ-45: 100 BaseT or 1000
BaseT (gigabit)
|
USB
|
Type A 2.0 (female)
|
Analog
|
RCA |
Power Supply
|
Connector
|
Micro USB
|
Input Voltage
|
100-240 VAC
50-60 Hz
|
Current
|
1 A
|
Power
|
5 W
|
Servers
|
IP Address
|
DHCP
Static
Reserved
|
Prioritization
|
QoS/ToS |
Users
|
150 (Per Server)
|
Max Channels
|
2 mono
|
WAP Support
|
802.11n or better with WMM enabled
|
Supported WAP Frequencies
|
1.4 GHz and 5 GHz
|
Bandwidth Use
|
Approx. 140 kbps per user
|
App Support
|
iOS/Android |
Cloud Service
|
Yes |
Regulatory
|
FCC, CE, RoHS
|
Multiple
servers may be used to increase the number of channels |
Audio Everywhere from Listen servers are cloud
managed with customizable in-app functions which support
welcome messages, videos, sliding banners, pdf
documents, offers and supports portable smart iOS and
Android devices |
ListenIR 2-Channel Transmitter/Radiator Combo
|
Audio
|
Frequency Response
|
20 Hz - 20 kHz (+/- 1 dB) Line
Input
63 Hz - 15 kHz (+/- 3 dB) System Specification (Wireless
end-to-end With LR-44)
|
Signal-to-Noise Ratio
|
More than 70 dB (SNR) Line Input
More than 60 dB (SNR) System Specification (Wireless
end-toend with LR-44)
|
Microphone Input
|
Two 3.5 mm Tip/Sleeve Connector
-30 dBu Nominal input
+14dB headroom
impedance 4. kOhms
5 VDC bias supply
|
Total Harmonic Distortion
|
Less than 0.1 percent (THD) Line
input
Less than 2 percent (THD) System specification (wireless
end-to-end with LR-44)
|
Balanced Line Input
|
Mono Input
Two Phoenix type connector, Balanced, +4 dB
Unnominal Input, =14 dB headroom, Impedance 100 kOhms
|
Controls
|
Power Switch
|
Three position switch
Power OFF
Power ON-Indicator Lights OFF
Power ON-Indicator Lights ON
|
Carrier Frequency Selection
|
Two, four position rotary switches
(2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz)
|
Level Control Knob
|
Two audio taper rotary potentiometer,
counter-clockwise decreases input mix level, clockwise
increases input mix level
|
Indicators
|
Power Supply LED
|
Green LED on in-line power supply
indicates AC power in applied
|
Audio Level Indicators
|
Two Green LEDs
Two Red LEDs
Green LED indicates Audio presence and Red LED indicates
peaks in the audio
|
RJ-45 Amber LED
|
Solid Amber indicates carrier is
present and IR is being transmitted
|
RJ-45 Green LED
|
Solid Green indicates power is
applied to unit, flashing indicates unit has enteresd
power save mode
|
RF
|
Carrier Frequencies
|
2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz,
Selectable
|
Number of Channels
|
Two channels, Selectable carrier
frequency
|
Frequency Accuracy
|
+/- 0.005 percent stability o to
50 degrees celsius
|
Transmitter Stability
|
50 PPM
|
Modulation
|
FM Wideband, +/- 50 kHz deviation
max, 50 uS pre-emphasis
|
Power Save Mode
|
Carrier will shut off when no
audio in present for 15 minutes on both channels to
preserve radiator life
|
Expansion Link Output
|
Two RJ-45 connectors
Provides RF Signal and Power, CAT-5e cable 24 AWG, 100 ft
maximum cable length, two LA-141s per output connector
|
IR
|
Coverage Area
|
2787 m2 (30000 ft2) single channel
with LR-4200-IR/LR-5200-IR receivers or 697 m2 ( 7500 ft2)
single channel with LR-42/LR-44 receivers
|
IR Emitter Power
|
1.49 W
|
Power
|
Power Supply Input
|
100-240 VAC
50-60 Hz
|
Power Supply Output
|
12 VDC
4 A
48 W
|
Power Supply Connector
|
2.5 mm ID barrel connector, center
positive
|
Power Output
|
Two RJ-45 connectors providing
Power and RF signal for up to two LA-141 expansion
radiators on each output
|
Power Supply Type
|
In-Line switching mode power
supply, listen part number LA-210
|
Physical
|
Color
|
Black with White Silk Screening
|
Mounting
|
Can be mounted on a wall, ceiling,
or table with provided hardware (screws and hollow wall
anchors not provided)
Optional LA-347 Wall Box Mounting Plate is available for
mounting to a standard single gang electrical box |
Enviromental
|
Temperature - Operation
|
14 to 104 degrees fahrenheit
|
Temperature - Storage
|
-4 to 122 degrees fahrenheit
|
Relative Humidity
|
0 to 95 percent relative humidity,
non-condensing
|
Compliance
|
Standards
|
FCC part 15, ICS-03, CE, UL, CUL,
C-Tick, CCC, PSE, KC, GS, RoHS, WEEE
|
Power Supply Compliance Marks
|
CUL, UL, CE, CCC, C-Tick, KC, PSE,
GS, FCC, RoHS |
Remote Power Supply Kit (For LT-84)
|
Physical
|
Color
|
Black |
Adapter Connections
|
DC plug type, 0.2" OD, center
positive and RJ-45
|
Dual RCA to Dual RCA Cable 6.6 FT. (2 M)
|
Interconnections
|
Connectors
|
Dual RCA (male) to Dual RCA (male)
|
Physical
|
Cable Length
|
6.6 ft
|
Intelligent DSP IR Receiver
|
Audio
|
System Distortion
|
Less 2 percent total harmonic
distortion (THD) at 80 percent deviation
|
Audio Output Jacks
|
Two 3.5 mm connectors, unbalanced,
0 dBu nominal output level, 16 mW maximum, impedance 32
Ohm, accepts mono o stereo phono plug or LA-430
intelligent Ear phone/Neck Loop Lanyard
|
System Frequency Response
|
63 Hz - 15 kHz (+/- 3 dB)
|
System Signal to Noise Ratio
|
More than 60 dB
|
Control
|
User Controls
|
Power on/off and volume up/down
|
Programming
|
Via software and USB port, Auto
Seek, Jack Sense, Squelch, Auto Power, Auto Off, Stereo,
Brightness, Channel Name
|
Set-up Controls
|
Press and hold up/down volume
buttons for 5 seconds to enterchannel adjust, use up/down
to select channel
|
Indicators
|
Display
|
OLED - Channel designation,
battery level, unit number, charging status, volume status
|
LED
|
Flashes when batteries are low or
to indicate charging solid when fully charged
|
RF
|
Carrier Frequencies
|
2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz
|
Number of Channels
|
Four selectable channels
|
Frequency Accuracy
|
+/- 0.005 percent stability 32 to
122 degrees fahrenheit
|
Modulation
|
FM Wideband, +/- 50 kHz deviation
max, 50 uS de-emphasis
|
IR
|
Coverage Area
|
30000 ft2 single channel with
LT-84/LA-141 or 40,000 ft² (3716 m²) single channel with
LT-82/LA-140
|
Squelch
|
Programmable in 20 steps,
automatic on loss of IR signal
|
Power Save Mode
|
Turns unit off after a specified
time of no IR signal, default in 30 minutes
|
Sensitivity
|
Better than one nW/cm2 at 40 dB
SNR
|
Power
|
Power Supply
|
Micro USB connector
5 V
500 mA
|
Battery Type
|
Lithium on
|
Battery Life
|
8 Hours of Typical Use
|
Battery Charging Time
|
Fully charged in 2.5 Hours
|
Enviromental
|
Temperature - Operation
|
14 to 104 degrees fahrenheit
|
Temperature - Storage
|
-4 to 122 degrees fahrenheit
|
Relative Humidity
|
0 to 95 degrees relative humidity,
non-condensing
|
Compliance
|
Standards
|
FCC Part 15, ICS-03, CE, RoHS,
WEEE, ADA 706, CBC 11B-706 |
Universal Ear Speaker
|
Audio
|
Frequency Response
|
20 Hz - 20 kHz
|
Impedance
|
32 Ohms +/- 15 percent at 1 kHz
|
Imput Sensitivity
|
115 dB +/- 4 dB at 1 kHz, 1 mW
|
Rated Power Input
|
50 mW
|
Max Power Input
|
100 mW
|
Interconnections
|
Connector/s
|
Male 3.5 mm (TRS)
|
Physical
|
Color
|
Dark Gray
|
Cable Length
|
13", extension cable is 28"
|
Compliance
|
Standards
|
RoHS |
Intelligent Ear Phone/Neck Loop Lanyard
|
Interconnections
|
Connectiions to Receiver
|
Male 3.5 mm (TRRS) to Male 3.5 mm
(TRRS)
|
Connection to Short Ear Phone
|
Female 3.5 mm (TRS)
|
Loop
|
Neck Loop Field Strength
|
400 mA/m (+/- 3 dB)
|
Neck Loop Frequency Response
|
100 Hz to 5 kHz (+/- dB ref 1 kHz)
|
Physical
|
Color
|
Black |
Cord Length
|
29" |
Compliance
|
Standards
|
RoHS, IEC60118-4 |
4-Port USB Charger
|
Power
|
Power Supply Input
|
100-240 V
50-60 Hz
0.5 A
|
ower Supply Output
|
5.0 VDC
4.2 A
|
Physical
|
Color
|
Black |
Cable Length
|
36" |
Cable Type
|
4 - USB to Micro USB Cable
(LA-422)
|
Compliance
|
Standards
|
UL, FCC, RohS
|
Dante 2 Channel Output XLR Adapter
|
Physical
|
Color
|
Black |
Cable Length
|
11" |
Audio Connection
|
XLR |
Power
|
Type Required
|
Power Over Ethernet Switch or
802.3af Compliant POE Injector |
Weight and Dimensions
|
Weight
|
20 lbs
|