General
Information |
Manufacturer
|
Listen Technologies |
Manufacturer Part
Number |
TP-K4
|
Product Name
|
TalkPerfect Speech Transfer Kit 4
|
Overview |
The
TalkPerfect Speech Transfer System is designed to improve
communication at fixed screen security counters. The
TalkPerfect Speech Transfer Kit 4 provides optional use of
the POD microphone / POD speaker on both client and staff
sides for aesthetic reasons. Based on proven, reliable and
patented technology, the full duplex (two way) system
amplifies speech for both the client and staff while
minimizing background noise and actively reducing acoustic
feedback |
Features |
Full duplex (two way)
Communication
Feedback and echo
suppression built in
Multiple microphone and
speaker options
Simple integration to
CLD1 loop amplifier
Compact design
All connections on one
panel for ease of installation
Fully adjustable gain on
both channels
Low cost of ownership
Furnish and install a
speech transfer system designed to improve
communication for fixed screen security counters
The system shall provide
full duplex communication with built in feedback and
echo suppression to maximize the audio gain before
feedback
The system shall have
two microphone inputs suitable for unbalanced electret
style microphones and two speaker outputs with a
frequency response of 20Hz – 10kHz, minimum load of 4
ohms and a maximum output level of + 14 dBu
The system shall have a
3.5mm staff override unbalanced line input/output to
accommodate a staff headset
The system shall have
fully adjustable audio gain adjustments with signal
presence LEDs for both the staff and client side
The system shall have a
configurable mute or PTT (Push to Talk) function for
the staff side
The system shall have an
unbalanced line output suitable to drive a CLD1
counter loop system for use with clients that have
T-coil equipped hearing aids
The TP-K4 TalkPerfect
Speech Transfer Kit 4 is specified
|
Specification |
Includes
|
One TP-DX Talkperfect Duplex
Amplifier
Two TP-PDM POD Microphone
Two TP-PDS POD Speaker |
Audio
|
Speaker Output
|
Two Speaker Outputs less than 0.5
percent THD at 1 kHz with + 11 dBu (1W into 8u)
Bandwidth: 20 Hz - 10 kHz
Min Load: 4u
Max Output Level: +14 dBu
|
Microphone Input
|
Two microphones inputs
Suitable for unbalanced electret capsules
DC bias voltage: 6 V through 1 kOhms
Suitable source: 1 kOhms
Input Impedance: 8 kOhms
Input noise level: -124 dBu
|
Line Output
|
Unbalanced phono socket for
connection to CLD 1 line input - cable supplied
|
Controls
|
Control Port
|
LED output connects to combi mic
speaker toindicate if system is active i.e. Mute turns LED
off
PTT and Mute are active low
+12 Vdc for external module supply
100 mA fused
|
Interconnections
|
Staff Override
|
Unbalanced Line I/O using 3.5 mm
jack socket
Input equal Tip, Output equal Ring
Input sesitivity -10 dBu with 1 kOhms source
Output level max: +4 dBu, typical -10 dBu
Output: Z 220 Ohms
|
Power
|
Nominal Voltage
|
12 VDC
Quiescent: 170 mA 2 W
Maximum: 1.0 A 12 W
|
Compliance
|
Standards
|
FCC part 15, ICES-3 (B), UL, CUL,
CE marked to all relevant safety and EMC standards |
Weight and Dimensions
|
Dimensions
|
1.57" x 7.90" x 4.33" |
Weight
|
9 lbs
|