|
Listen Technologies LDS-5200-072 LDS
Meeting House Receiver; It is an LR-5200-072 with customized programming
that incorporates Listen Technologies’ advanced new generation of
personal listening products, iDSP or Intelligent Digital Signal
Processing; UPC LISTENTECHNLOGIESLDS5200072; With Listens unique DSP
audio processing technology, users experience crystal clear audio that
is pleasing to any user, with or without hearing loss; Advanced green
battery technology dramatically reduces costs of ownership and hassles
while reducing the number of batteries in landfills; A field replaceable
Lithium-ion battery is included with the unit; The integrated neck loop
lanyard with DSP loop driver, improves the listening
experience for T-coil users; iDSP is the smallest device of its kind,
making it easier to wear and easier for venues to dispense, store and
maintain; The LDS-5200-072 has an OLED display to program channel names,
monitor battery status, channel status, and charge activation; Connect
the iDSP neck loop lanyard or ear phones via two 0.14" output jacks
(receivers can be shared); The Micro USB connection is used for charging
and with the iDSP software suite for programming changes, inventory
management and firmware updates; The result is an exceptional listening
experience in your meeting house chapel; Dimensions 3.75" x 2.0" x
0.64"; Weight 0.1 lbs; Shipping Weight 1.0 lbs
|
General Information
|
|
Manufacturer
|
Listen
Technologies
|
|
Manufacturer Part Number
|
LDS-5200-072
|
|
Product Name
|
LDS Meeting
House Receiver
|
| UPC Code |
LISTENTECHNLOGIESLDS5200072
|
|
Features
|
- It is an LR-5200-072 with
customized programming that incorporates Listen Technologies’
advanced new generation of personal listening products, iDSP
or Intelligent Digital Signal Processing
- With Listens unique DSP audio
processing technology, users experience crystal clear audio
that is pleasing to any user, with or without hearing loss
- Advanced green battery
technology dramatically reduces costs of ownership and hassles
while reducing the number of batteries in landfills
- A field replaceable Lithium-ion
battery is included with the unit
- The integrated neck loop lanyard
with DSP loop driver, improves the listening experience for
T-coil users
- iDSP is the smallest device of
its kind, making it easier to wear and easier for venues to
dispense, store and maintain
- The LDS-5200-072 has an OLED
display to program channel names, monitor battery status,
channel status, and charge activation
- Connect the iDSP neck loop
lanyard or ear phones via two 0.14" output jacks (receivers
can be shared)
- The Micro USB connection is used
for charging and with the iDSP software suite for programming
changes, inventory management and firmware updates
- The result is an exceptional
listening experience in your meeting house chapel
|
|
Pictures
|
|
|
Specifications
|
What's in box
|
One (1) LDS-5200-072 LDS Meeting House Receiver
(LR-5200-072 with customized settings)
One (1) Quick Start Guide
|
Audio
|
|
Frequency
Response
|
50 Hz
- 15 kHz (more or less 3 dB)
|
System
Distortion
|
Less
than 2 percent total harmonic distortion (THD) at 80 percent
deviation
|
Outputs
|
Two
0.14" connectors, unbalanced, 0 dBu nominal output level, 16 mW
maximum, impedance 32 ohm
|
System Signal to Noise Ratio
|
SQ enabled 80 dB, SQ disabled 60 dB
|
Controls
|
|
User
Controls
|
Power,
up and down volume, Listen button for end user channel selection
|
| Programming |
Via
software and USB port
|
Set-up
Controls
|
Press
and hold up and down volume buttons for 5 seconds to enter channel
adjust, use up and down to select channel
|
| Indicators |
|
| LEDs |
Flashes when batteries are low or to indicate charging,
solid when fully charged
|
Display
|
Channel
designation,battery level, unit number, charging status
|
RF
|
|
Frequency
Range
|
72.0250
- 75.9500 MHz
|
Number
of Channels
|
17
wide band, 40 narrow band
|
Sensitivity
|
0.6uV typical, 1 uV maximum for 12 dB sinad
|
Frequency
Accuracy
|
More
or less .005 percent stability 0 C to 50 C
|
Squelch
|
Programmable
in 20 steps, automatic on loss of RF signal
|
Antenna
Type
|
Uses
ear phone/neck loop lanyard and short ear phone cable or standard
earphone cable
|
Power
|
|
Power
Supply
|
Micro
USB connector, 5 V, 500 mA
|
| Battery
Type |
Lithium
Ion 3.7 Vdc, 1200 mAh
|
| Battery
Life |
8
Hours of continuous use
|
| Battery Charging Time |
Fully charged in 2.5 Hours |
Enviromental
|
|
Temperature of Operation
|
-10 to 40 C
|
Temperature of Storage
|
-20 to 50 C
|
Relative Humidity
|
0 to 95 percent relative humidity, non-condensing
|
Compliance
|
|
Standards
|
FCC Part 15, Part 90, Industry Canada, RoHS
|
| Physical |
|
| Color |
Black
|
Dimensions
|
3.75" x 2.00" x 0.64" |
Dimensions with Belt Clip
|
3.75" x 2.00" x 0.80" |
Weight
|
0.1 lbs
|
Shipping Weight
|
1.0 lbs |
M-20180222-1831-225-L
M-20181210-1831-210-L
*This item is BRAND
NEW - not refurbished. It comes with all manufacturer supplied
accessories, and full manufacturer's USA warranty.
|
