|
Magnum Energy MMS1012-G MMS Series 1000 Watt,
12V Inverter/50 Amp PFC Charger with GFCI and 3 ft. AC Cord,
Input battery voltage range 9 - 17 VDC, Nominal AC output voltage 120 VAC +/-
5%, Output frequency and accuracy 60 Hz +/- 0.1%, Rated input battery current
133 ADC, Inverter efficiency (peak) 87%, Transfer time 16 msecs, No load (120
VAC output) 19 watts, Pure Sine Wave Waveform, Internal cooling 0 to 59 cfm
variable speed, Overcurrent protection with two overlapping circuits,
Overtemperature protection on transformer and MOSFETS, On/Off with status
indicator front mounted and easily accessible, Output circuit breaker 15 A
switchable, Input circuit breaker 16 AAC
|
General Information |
|
Manufacturer |
Magnum Energy |
|
Manufacturer Part Number |
MMS1012-G |
|
Product Name |
MMS Series 1000 Watt, 12V Inverter/50 Amp
PFC Charger with GFCI and 3 ft. AC Cord |
|
Marketing Information |
|
The MMS Series from
Magnum Energy - a pure sinewave inverter providing a cost effective
solution for those with smaller power needs in mobile applications.
Versatile, easy-to-use, and lightweight, the MMS Series provides a
reliable base for your energy system.
This inverter is designed to accommodate entertainment systems and small
appliances in smaller RVs and boats in an all new design. Based on the
popular ME and MS Series inverters, the MMS is smaller, lighter and less
expensive while retaining all the built in protection and reliability of
ME and MS models. The MMS charger uses a PFC (Power Factor Corrected)
charger, which is 85% efficient and the same charger topology used in
all Magnum models.
The MMS1012G model comes with a flexible
cord on the AC input and a GFCI outlet on the output for easy connection
to your AC appliances; ready to use after connecting to your batteries.
All other MMS Series models are designed to be hardwired into the
elctrical system and do not include the AC cord or GFCI outlet.
The MMS Series is ETL Listed to the stringent requirements of UL/cUL
458, CSA C22.2 #107.1-01 and meets the KKK-A-822E standard. |
|
Features |
-
Power Factor
Corrected (PFC) Charger: Our PFC charger is built into all of our
inverter chargers. It uses less energy from a generator than a
standard charger – using 25-30% less AC
current than standard chargers.
-
Safe and
reliable: The MMS Series is ETL Listed to the stringent requirements
of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
-
Attractive
styling: The modern, hourglass case, paired with the die cast
aluminum base combines form with function, creating an attractive
unit that uses its base as a heat sink for superior
high temperature operation.
-
Standard transfer
relay: The standard 20 amp transfer relay will pass AC power through
the inverter when using shore or generator power.
-
Low/high battery
protection: If your battery voltage reaches below 10 VDC or above
15.5 VDC, the MMS Series will automatically shut down.
-
Versatile
mounting: Mount the MMS Series on a shelf, bulkhead, or even upside
down.
-
Fan cooled: The
MMS Series is fan cooled, enabling the unit to work well in confined
spaces. If the inverter does exceed its temperature limits, it will
automatically shut down and then restart when it cools down.
-
Current overload
protection: The MMS Series will automatically shut down if its
output wattage is exceeded or it detects a short in the wiring,
saving the unit from costly damage.
-
Convenient
switches: The MMS Series comes with an on/off front-mounted switch
with an easy-to-read LED indicator.
-
Circuit breaker
protection: This model comes with built in input and output circuit
breakers for ease of installation.
-
Battery temp
sensor: The standard battery temp sensor monitors temperatures from
0 - 50° C.
|
|
Specifications |
|
Inverter
Specifications |
|
Input battery voltage range
|
9 - 17 VDC |
|
Nominal AC output voltage |
120 VAC ± 5% |
|
Output frequency and accuracy |
60 Hz ± 0.1% |
|
Total Harmonic Distortion (THD) |
< 5% |
|
1 msec surge current (amps AC) |
38 |
|
100 msec surge current (amps AC) |
21 |
|
5 sec surge power (real watts) |
1550
|
|
30 sec surge power (real watts)
|
1600 |
|
5 min surge power (real watts) |
1200 |
|
30 min surge power (real watts) |
1050 |
|
Continuous power output at 45°C |
1000 VA |
|
Rated input battery current |
133 ADC
|
|
Inverter efficiency (peak) |
87% |
|
Transfer time
|
16 msecs |
|
Search mode (typical)
|
5 watts |
|
No load (120 VAC output) |
19 watts |
|
Waveform |
Pure Sine Wave |
|
Charger Specifications |
|
Continuous output at 45°C |
50 ADC
|
|
Charger efficiency |
84% |
|
Power factor
|
> .95 |
|
Input current at rated output (AC amps) |
7 |
|
General Features and Capabilities |
|
Transfer relay capability |
20 AAC (input current for charging and
pass through) |
|
Battery temperature compensation
|
Yes, 15 ft Battery Temp Sensor standard |
|
Remote available (optional) |
Yes, MM-R or ME-RC |
|
Internal cooling |
0 to 59 cfm variable speed
|
|
Overcurrent protection
|
Yes, with two overlapping circuits |
|
Overtemperature protection |
Yes on transformer and MOSFETS |
|
On/Off with status indicator |
Yes, front mounted and easily accessible |
|
Low battery cutout
|
10 VDC, adjustable with the
ME-RC remote |
|
GFCI Outlet |
Standard, with 3 ft cord |
|
Output circuit breaker
|
15 A switchable |
|
Input circuit breaker
|
20 AAC
|
|
Listings
|
ETL Listed to UL/cUL458, CSA C22.2
#107.1-01, meets KKK-A-1822E standard |
|
Environmental Specifications |
|
Operating temperature |
-20° C to +60° C (-4° F to 140° F) |
|
Nonoperating temperature
|
-40° C to +70° C (-40° F to 158° F) |
|
Operating humidity
|
0 to 95% RH non condensing |
|
Physical Specifications |
|
Dimensions (h x w x d) |
16.6” x 8.4” x 4.7” (42 cm x 21 cm x 12
cm) |
|
Mounting
|
Shelf (top or bottom up) or bulkhead
(vents up) |
|
Weight |
23 lb (10.4 kg) |
|
Max operating altitude |
15,000’ (4570 m) |
|
Construction |
ABS plastic top and cast aluminum bottom |
A-20110427-1500-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
