Magnum Energy MS4048PAE MS-PAE Series 4400
Watt, 48V, Parallel Inverter/60 Amp PFC Charger/120V/240V Input/Output, Input battery voltage range
36 - 68 VDC, Nominal
AC output voltage 120/240 VAC split phase (+/- 5%), Output frequency and accuracy 60 Hz +/- 0.1%, Rated
input battery current 144 A, Inverter efficiency (peak) 94%, Transfer time 16
msecs, Search mode less than 6 watts, No load (120 VAC output) 25 watts, Pure
Sine Wave Waveform, Continuous output at 45°C 60 ADC, Charger efficiency 85%, Input
current at rated output (AC amps) 15 AAC per leg at 120/240 VAC split phase,
Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC
fans, Overcurrent protection with two overlapping circuits
General Information |
Manufacturer |
Magnum Energy |
Manufacturer Part Number |
MS4048PAE |
Product Name |
MS-PAE Series 4400 Watt, 48V, Parallel
Inverter/60 Amp PFC Charger/120V/240V Input/Output |
Marketing Information |
The MS-PAE 120/240V
Series Inverter/Charger from Magnum Energy is a pure sine wave inverter
designed specifically for the most demanding renewable energy
applications. The MS-PAE Series is powerful, easy-to-use, and best of
all, cost effective. No series stacking required: The unique design of
the MSPAE Series can provide 120 and 240 volts output in one unit,
eliminating the need to stack two units together to get 240 volts.
When the power requirements of the system are beyond the capacity of a
single MS-PAE Series inverter or the system is expanded as more loads
are added, up to four MS-PAE Series inverters can be connected together
in a parallel configuration. When connecting inverters in parallel, the
overall inverter power and surge capacity is increased to power a large
single load or more smaller loads.
Parallel stacking: You can parallel up to four inverter/chargers for up
to 17.6kw of power at 120/240V. The MP panels and router are required
for parallel stacking the MS-PAE Series.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all
of our inverter chargers. It uses less energy from a generator than a
standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MS-PAE Series is ETL Listed to the stringent
requirements of UL 1741, 1st edition, and CSA C22.2 #107.1-01 for
renewable energy installations. |
Features |
-
Pure sine wave:
Power your T.V.s, stereos, plasma screens, and other sensitive
electronics without worry. The pure sine wave inverter and power
factor corrected charger provide clean, reliable inverter power with
low total harmonic distortion (THD) of less than 5%.
-
Choices: The
MS-PAE Series comes in 24 and 48 volt configurations, allowing you
to choose the model that is right for you.
-
Versatile
mounting: Mount the MS-PAE Series on a shelf or wall.
-
Lightweight: The
lightweight aluminum base and cover also provides noise reduction
and corrosion resistance.
-
Multiple ports:
The MS-PAE Series provides multiple ports, including an RS485
communication port for network expansion, and a remote port.
-
Accessible
design: The extra large AC access cover with terminal screw block
and 360° DC connection terminals with covers make this inverter more
accessible when it needs to be.
-
Convenient
switches: The MSPAE Series comes with an on/off inverter-mounted
switch with an easy-to-read LED indicator.
|
Specifications |
Inverter
Specifications |
Input battery voltage range
|
36 - 68 VDC |
Nominal AC output voltage |
120/240 VAC split phase (± 5%) |
Output frequency and accuracy |
60 Hz ± 0.1% |
Total Harmonic Distortion (THD) |
< 5% |
1 msec surge current (amps AC) |
Line-Neutral: 120, Line-Line: 70 |
100 msec surge current (amps AC) |
Line-Neutral: 75, Line-Line: 40 |
5 sec surge power (real watts) |
8500
|
30 sec surge power (real watts)
|
6000 |
5 min surge power (real watts) |
5400 |
30 min surge power (real watts) |
4800 |
Continuous power output at 25°C |
4400 VA (L-L) |
Rated input battery current |
144 A
|
Inverter efficiency (peak) |
94% |
Transfer time
|
16 msecs |
Search mode
|
< 6 watts |
No load (120 VAC output) |
25 watts |
Waveform |
Pure Sine Wave |
Charger Specifications |
Continuous output at 45°C |
60 ADC
|
Charger efficiency |
85% |
Power factor
|
> 0.95 |
Input current at rated output (AC amps) |
15 AAC per leg at 120/240 VAC split phase |
General Features and Capabilities |
Transfer relay capability |
2 legs at 30A per leg transfer standard on
all models |
Five stage charging capability |
Bulk, Absorb, Float, Equalize (requires
remote), and Battery Saver™ |
Battery temperature compensation
|
Yes, 15 ft Battery Temp Sensor standard |
Internal cooling |
0 to 120 cfm variable speed drive using
dual 92mm brushless DC fans |
Overcurrent protection
|
Yes, with two overlapping circuits |
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
Conformal coating on PCB’s for corrosion
protection |
Yes |
Powder coated chassis & top for corrosion
protection |
Yes |
Stainless steel fasteners for corrosion
protection |
Yes |
Listings
|
ETL Listed to ANSI / UL1741, 1st edition,
and CSA STD C22.2 No.107.1-01 |
Environmental Specifications |
Operating temperature |
-20° C to +60° C (-4° F to 140° F) |
Nonoperating temperature
|
-40° C to +70° C (-40° F to 158° F) |
Operating humidity
|
0 to 95% RH non condensing |
Physical Specifications |
Dimensions (h x w x d) |
13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm
x 20.3 cm) |
Mounting
|
Shelf, wall (no vents on bottom), MP or
MMP panels |
Weight |
55 lb (24.9 kg) |
Max operating altitude |
15,000’ (4570 m) |
A-20110517-1500-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|