Magnum Energy MMS912E MMS-Export Series 900
Watt, 12V Inverter/40 Amp PFC Charger, Input battery voltage range 9 - 17 VDC, Nominal
AC output voltage 230 VAC +/- 5%, Output frequency and accuracy 50 Hz +/- 0.1 Hz, Rated
input battery current 120 ADC, Inverter efficiency (peak) 87%, Transfer time ~
20 ms, Search mode 0.4 ADC at 12.6 V, No load (120 VAC output) 19 watts at 12.6V,
Pure Sine Wave Waveform, Continuous output at 45°C 40 ADC, Charger efficiency 80%, Input
current at rated output (AC amps) 3, Internal cooling 0 to 59 cfm variable
speed, Overcurrent protection with two overlapping circuits, Low battery cutout
10 VDC, adjustable with the ME-RC remote, Output circuit breaker 7 A switchable,
Input circuit breaker 8 AAC
General Information |
Manufacturer |
Magnum Energy |
Manufacturer Part Number |
MMS912E |
Product Name |
MMS-Export Series 900 Watt, 12V
Inverter/40 Amp PFC Charger |
Marketing Information |
Introducing the
MMS-Export Series Inverter/Charger - designed specifically for countries
with 230Vac/50Hz power for installations that only need to run smaller
loads and appliances and require a pure sinewave inverter output .
The MMS-E models are smaller, lighter and less expensive while retaining
all the built-in protection and reliability of the MS models. The
battery charger uses a PFC (Power Factor Corrected) charging topology,
which is 85% efficient and the same charger topology used in all Magnum
inverter/charger models.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all
of our inverter/chargers. It uses less energy from a generator than a
standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MMS-E Series is listed to the stringent CE
requirements, ensuring the inverter/charger is safe and reliable.
Attractive styling: The modern, hourglass case, paired with the die cast
aluminum base combines form with function, creating an attractive unit
that uses its base as a heat sink for superior high temperature
operation. |
Features |
-
Standard transfer
relay: The standard 20 amp transfer relay will pass AC power through
the inverter when using shore or generator power.
-
Low/high battery
protection: If your battery voltage reaches below 10 VDC or above 17
VDC, the MMS-E Series will automatically shut down.
-
Versatile
mounting: Mount the MMS-E Series on a shelf, wall, or even upside
down.
-
Fan cooled: The
MMS-E Series is fan cooled, enabling the unit to work well in
confined spaces. If the inverter does exceed its temperature limits,
it will automatically shut down and then restart when it cools down.
-
Current overload
protection: The MMS-E Series will automatically shut down if its
output wattage is exceeded or it detects a short in the wiring,
saving the unit from costly damage.
-
Convenient
switches: The MMS-E Series comes with an on/off front-mounted switch
with an easy-to-read LED indicator.
-
Circuit breaker
protection: This model comes with built in input and output circuit
breakers for ease of installation.
-
Battery temp
sensor: The standard battery temp sensor monitors temperatures from
0 - 50° C
|
Specifications |
Inverter
Specifications |
Input battery voltage range
|
9 - 17 VDC |
Nominal AC output voltage |
230 VAC ± 5% |
Output frequency and accuracy |
50 Hz ± 0.1 Hz |
Total Harmonic Distortion (THD) |
< 5% |
1 msec surge current (amps AC) |
30 |
100 msec surge current (amps AC) |
7.5 |
5 sec surge power (real watts) |
1600
|
30 sec surge power (real watts)
|
1250 |
5 min surge power (real watts) |
1200 |
30 min surge power (real watts) |
1100 |
Continuous power output at 25°C |
900 VA |
Rated input battery current |
120 ADC |
Inverter efficiency (peak) |
87% |
Transfer time
|
~ 20 ms |
Search mode
|
0.4 ADC at 12.6 V |
No load (120 VAC output) |
19 watts at 12.6V |
Waveform |
Pure Sine Wave |
Charger Specifications |
Continuous output at 45°C |
40 ADC |
Charger efficiency |
80% |
Power factor
|
> 0.95 |
Input current at rated output (AC amps) |
3 |
General Features and Capabilities |
Transfer relay capability |
20 AAC (input current for charging and
pass through) |
Battery temperature compensation
|
Yes, 4.6 m (15’) Battery Temp Sensor
standard |
Internal cooling |
0 to 59 cfm variable speed |
Overcurrent protection
|
Yes, with two overlapping circuits |
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
On/Off with status indicator |
Yes, front mounted and easily accessible |
Low battery cutout |
10 VDC, adjustable with the ME-RC remote |
AC output |
Hardwire |
AC input |
Hardwire |
Output circuit breaker |
7 A switchable |
Input circuit breaker |
8 AAC |
Listings |
Listed to CE |
Environmental Specifications |
Operating temperature |
-20° C to +60° C (-4° F to 140° F) |
Nonoperating temperature
|
-40° C to +70° C (-40° F to 158° F) |
Operating humidity
|
0 to 95% RH non condensing |
Physical Specifications |
Dimensions (h x w x d) |
42 cm x 21 cm x 12 cm (16.6” x 8.4” x
4.7”) |
Mounting
|
Shelf (top or bottom up) or wall (vents
up) |
Weight |
23 lb (10.4 kg) |
Max operating altitude |
15,000’ (4570 m) |
Construction |
ABS plastic top and cast aluminum bottom |
A-20110517-1500-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|