|
|
|
Magnum Energy RD4024E RD-Export Series 4000
Watt, 24V Inverter/105 Amp PFC Charger, Input battery voltage range 18 - 32 VDC, Nominal
AC output voltage 230 VAC +/- 5%, Output frequency and accuracy 650 Hz +/- 0.4
Hz, Rated input battery current 267 ADC, Inverter efficiency (peak) 89%,
Transfer time 20
msecs, Search mode Less than 8 watts, No load (120 VAC output) 32 watts, Modified Sine Wave
Waveform, Continuous output at 25°C 105A, Charger efficiency 85%, Input
current at rated output (AC amps) 16, Internal cooling 0 to 120 cfm variable
speed, Overcurrent protection with two
overlapping circuits, Overtemperature protection on transformer, MOSFETS and
battery
|
General Information |
|
Manufacturer |
Magnum Energy |
|
Manufacturer Part Number |
RD4024E |
|
Product Name |
RD-Export Series 4000 Watt, 24V
Inverter/105 Amp PFC Charger |
|
Marketing Information |
|
Introducing the
RD-Export Series Inverter/Chargers - designed specifically for countries
that require 230Vac/50Hz power. This unit is powerful, easy-to-use, and
best of all, cost effective. Install the RD-E Series in four easy steps:
Simply connect the inverter's output to your distribution circuits or
electrical panel, connect your power cable (AC) to the inverter's
easy-to-reach terminal block, connect the batteries, and switch on the
power.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all
of our inverter chargers. It uses less energy from a generator than a
standard charger – using 25-30% less AC current than standard chargers.
Battery temp sensor: The standard battery temp sensor monitors
temperatures from 0 - 50° C.
Convenient switches: All RD-E Series models come with an on/off
inverter-mounted switch with an easy-to-read LED indicator. |
|
Features |
-
Easy-to-install:
Install the RD-E Series in four easy steps. See your installation
manual for specific instructions.
-
Versatile
mounting: Mount the RD-E Series on a shelf or wall.
-
Multiple ports:
The RD-E Series provides multiple ports, including an RS485
communication port for network expansion, and a remote port.
-
Accessible
design: The extra large AC access cover with terminal screw block
and 360° DC connection terminals with covers make this inverter
easily accessible.
|
|
Specifications |
|
Inverter
Specifications |
|
Input battery voltage range
|
18 - 32 VDC |
|
Nominal AC output voltage |
230 VAC ± 5% |
|
Output frequency and accuracy |
50 Hz ± 0.4 Hz |
|
1 msec surge current (amps AC) |
100 |
|
100 msec surge current (amps AC) |
40 |
|
5 sec surge power (real watts) |
7500
|
|
30 sec surge power (real watts)
|
6750 |
|
5 min surge power (real watts) |
6000 |
|
30 min surge power (real watts) |
5500 |
|
Continuous power output at 25°C |
4000 VA |
|
Rated input battery current |
267 ADC
|
|
Inverter efficiency (peak) |
89% |
|
Transfer time
|
20 msecs |
|
Search mode
|
< 8 watts |
|
No load (230 VAC output, typical) |
32 watts |
|
Waveform |
Modified Sine Wave |
|
Charger Specifications |
|
Continuous output at 25°C |
105 A |
|
Charger efficiency |
85% |
|
Power factor
|
> 0.95 |
|
Input current at rated output (AC amps) |
16 |
|
General Features and Capabilities |
|
Transfer relay capability |
30 AAC |
|
Five stage charging capability |
Bulk, Absorb, Float, Equalize (requires
remote), and Battery Saver™ |
|
Battery temperature compensation
|
Yes, 15 ft Battery Temp Sensor standard |
|
Internal cooling |
0 to 120 cfm variable speed |
|
Overcurrent protection
|
Yes, with two overlapping circuits |
|
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
|
Conformal coating on PCB’s for corrosion
protection |
Yes |
|
Powder coated chassis & top for corrosion
protection |
Yes |
|
Stainless steel fasteners for corrosion
protection |
Yes |
|
Input circuit breaker
|
30 AAC |
|
Environmental Specifications |
|
Operating temperature |
-20° C to +60° C (-4° F to 140° F) |
|
Nonoperating temperature
|
-40° C to +70° C (-40° F to 158° F) |
|
Operating humidity
|
0 to 95% RH non condensing |
|
Physical Specifications |
|
Dimensions (h x w x d) |
13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm
x 20.3 cm) |
|
Mounting
|
Shelf (top or bottom up) or wall |
|
Weight |
55 lb (25 kg) |
|
Max operating altitude |
15,000’ (4570 m) |
A-20110603-1500-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|
