Magnum Energy MS2712E MS-E Series 2700 Watt,
12V Inverter/125 Amp PFC Charger, Input battery voltage range 9 - 17 VDC, Nominal
AC output voltage 230 VAC +/- 5%, Output frequency and accuracy 650 Hz +/- 0.4
Hz, Total Harmonic Distortion (THD) less than 5%, Rated input battery current
360 ADC, Inverter efficiency (peak) 86%, Transfer time 16 msecs, Search mode 9
watts, No load (120 VAC output) 34 watts, Pure Sine Wave
Waveform, Continuous output at 25°C 125ADC, Charger efficiency 83%, Input
current at rated output (AC amps) 8.5, Internal cooling 0 to 120 cfm speed drive
using dual 92mm brushless DC fans, Overcurrent protection with two
overlapping circuits, Overtemperature protection on transformer, MOSFETS and
battery
General Information |
Manufacturer |
Magnum Energy |
Manufacturer Part Number |
MS2712E |
Product Name |
MS-E Series 2700 Watt, 12V Inverter/125
Amp PFC Charger |
Marketing Information |
Magnum Energy now
offers two 230VAC/50Hz pure sine wave inverter/charger options for
mobile and off grid applications. The MS-E Series is powerful,
easy-to-use, and best of all, cost effective. Install the MS-E Series in
four easy steps: simply connect the inverter’s output to your
distribution circuits or electrical panel, connect your utility power
cable to the inverters easy-to-reach terminal block, connect the
batteries, and switch on the power.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all
of our inverter chargers. It uses less energy from a generator than a
standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MS-E Series is listed to the stringent CE
requirements, ensuring the inverter/charger is safe and reliable.
Easy-to-install: Install the MS-E Series in four easy steps: simply
connect the inverter’s output to your distribution circuits or
electrical panel, connect your utility power cable to the inverter’s
easy-to-reach terminal block, connect the batteries, and switch on the
power. |
Features |
-
Pure sine wave:
Power your T.V.s, stereos, plasma screens, and other sensitive
electronics without worry. The pure sine wave inverter and power
factor corrected charger provide clean, reliable inverter power with
low total harmonic distortion (THD) of less than 5%.
-
Choices: The MS-E
Series comes in 12 and 24 volt configurations, allowing you to
choose the model that is right for you.
-
Versatile
mounting: Mount the MS-E Series on a shelf, bulkhead, or even upside
down.
-
Lightweight: The
lightweight aluminum base and cover also provides noise reduction
and corrosion resistance.
-
Multiple ports:
The MS-E Series provides multiple ports, including an RS485
communication port for network expansion, and a remote port.
-
Accessible
design: The extra large AC access cover with terminal screw block
and 360° DC connection terminals with covers make this inverter more
accessible when it needs to be.
-
Convenient
switches: The MS-E Series comes with an on/off inverter-mounted
switch with an easy-to-read LED indicator.
|
Specifications |
Inverter
Specifications |
Input battery voltage range
|
9 - 17 VDC |
Nominal AC output voltage |
230 VAC ± 5% |
Output frequency and accuracy |
50 Hz ± 0.4 Hz |
Total Harmonic Distortion (THD) |
< 5% |
1 msec surge current (amps AC) |
45 |
100 msec surge current (amps AC) |
21 |
5 sec surge power (real watts) |
4100
|
30 sec surge power (real watts)
|
3750 |
5 min surge power (real watts) |
3600 |
30 min surge power (real watts) |
3500 |
Continuous power output at 25°C |
2700 VA |
Rated input battery current |
360 ADC
|
Inverter efficiency (peak) |
86% |
Transfer time
|
16 msecs |
Search mode
|
9 watts |
No load (230 VAC output, typical) |
34 watts |
Waveform |
Pure Sine Wave |
Charger Specifications |
Continuous output at 25°C |
125 ADC |
Charger efficiency |
83% |
Power factor
|
> 0.95 |
Input current at rated output (AC amps) |
8.5 |
General Features and Capabilities |
Transfer relay capability |
30 amps AC |
Five stage charging capability |
Bulk, Absorb, Float, Equalize (requires
remote), and Battery Saver™ |
Battery temperature compensation
|
Yes, 15 ft Battery Temp Sensor standard |
Internal cooling |
0 to 120 cfm variable speed drive using
dual 92mm brushless DC fans |
Overcurrent protection
|
Yes, with two overlapping circuits |
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
Conformal coating on PCB’s for corrosion
protection |
Yes |
Powder coated chassis & top for corrosion
protection |
Yes |
Stainless steel fasteners for corrosion
protection |
Yes |
Listings |
CE |
Environmental Specifications |
Operating temperature |
-20° C to +60° C (-4° F to 140° F) |
Nonoperating temperature
|
-40° C to +70° C (-40° F to 158° F) |
Operating humidity
|
0 to 95% RH non condensing |
Physical Specifications |
Dimensions (h x w x d) |
13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm
x 20.3 cm) |
Mounting
|
Shelf (top or bottom up) or wall |
Weight |
53 lb (24 kg) |
Max operating altitude |
15,000’ (4570 m) |
A-20110603-1500-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|