Magnum Energy MPSL-60S Magnum Panel Single
Enclosure Low Capacity with Single-pole 60A AC Input Breakers, Capability for
one MS4024 inverter (expandable to two MS4024’s stacked in series using an
optional MPX extension box), Enclosure is steel construction with a durable,
white powder coat finish to help prevent corrosion, Built-in, pre-wired, full
system bypass switch for inverter isolation/battery maintenance, Front-mounted
AC and DC breakers for quick and easy operation, AC, DC and Ground busbars with
set-screw type compression terminals (no lugs required), Full system capacity
shunt (500 or 1000 DCA), allows easy connection to battery monitor, Enclosure
and components are certifi ed for indoor use to UL/CSA standards
General Information |
Manufacturer |
Magnum Energy |
Manufacturer Part Number |
MPSL-60S |
Product Name |
Magnum Panel Single Enclosure Low Capacity
with Single-pole 60A AC Input Breakers |
Marketing Information |
The Magnum Panels
(MP) are part of a new line of enclosures from Magnum Energy that
standardize inverter installations and allow for the ability to expand
the inverter system in the future.
Specifically designed for multiple inverter applications, the MP
enclosures ensure safety and reliability by combining all of the major
components required for a renewable energy system — inverter/
battery disconnect, AC overcurrent protection, grounding connections,
and a full-system bypass switch — into an easy to install pre-wired
enclosure. The modular design of the MP enclosure with
the Magnum Energy inverter allows it to be UPS shipped and easily
assembled on site. Installing an inverter system is now as simple as
mounting the MP enclosure, installing the inverters, connecting the
battery bank, and if needed, bringing in AC power from a generator or
the utility grid. Now all of the inverter’s required AC and DC
disconnects and wire connection points are all together, and integrated
in the self-contained MP enclosure.
The MP enclosures are available in four
basic confi gurations: the MPSL-30D, MPSH-30D, and MPDH-30D are designed
to be used with the Magnum MS-PAE inverter models when stacked in
parallel; and the MPSL-60S, which is designed for use with two MS4024
inverters when stacked in series. These confi gurations provide
different maximum power abilities to meet present and future
requirements.
MPSL-60S (Magnum Panel, Single Enclosure, Low Capacity, Single 60A AC
Inverter Input Breaker) Capability for one MS4024 inverter (expandable
to two MS4024’s stacked in series using an optional MPX extension box)
Expandable: start with the enclosure and
just one inverter and in the future expand to two inverters with ease,
using the MPX.
Easy installation:
all connections are frontmounted, including AC and DC breakers and the
MPX.
Labor saving: panel
is prewired for fast installation, saving labor costs.
DC load breakers:
fits either din rail or backmount DC load breakers.
Convenient knockouts:
knockouts on the side of the enclosure are compatible with most charge
controllers. |
Features |
-
Standard
configurations allow future expansion using MPX enclosures for
increased power
-
Enclosure is
steel construction with a durable, white powder coat finish to help
prevent corrosion
-
Built-in,
pre-wired, full system bypass switch for inverter isolation/battery
maintenance
-
Front-mounted AC
and DC breakers for quick and easy operation
-
AC, DC, and
Ground busbars with set-screw type compression terminals (no lugs
required)
-
Full system
capacity shunt (500 or 1000 DCA), allows easy connection to battery
monitor
-
Enclosure and
components are certifi ed for indoor use to UL/CSA standards
-
DC negative and
ground busbars (negative can be isolated if PV-GFP device installed)
-
Battery positive
busbar for DC loads and PV arrays included (not available on
MPSH-30D)
-
Space available
to add DC load/disconnect breakers (not available on MPSH-30D)
-
Standalone top
plate provided to allow other (non-Magnum) inverter installations
-
Knockouts for
inverter and battery cables, PV in/out, DC breakers
-
Data cables with
300-volt rated insulation provided to allow 240V AC inverter
installations
-
Easy
accessibility for fi eld installation/wiring of additional
breakers/components
-
Pre-wired AC
over-current circuit breaker protection to the inverter’s input
-
Space for
additional AC breakers (depends on enclosure confi guration)
-
Inverter DC
disconnect with inverter-to-breaker battery cables included
-
Plated copper
busbars included for up to six additional battery positive and
negative circuits
INCLUDES:
-
S60A AC Inverter
Input Breaker (x1)
-
D60A AC System
Bypass
-
250A DC
Disconnect (x1)
-
500A/50mV DC
Shunt
-
Inverter AC
Input/Output wires
-
Inverter Hood
(x1)
-
Data cables rated
for 120/240V AC circuits
-
Router and Charge
Controller Bracket
|
A-20110621-1500-130-L
*This item is BRAND NEW -
not refurbished. It comes with all manufacturer supplied accessories, and full
manufacturer's USA warranty.
|